2020 COROLLA FRONT WHEEL BEARING REPLACEMENT GET THE FRONT WHEEL BEARING HERE ( AMAZON) amzn.to/3zJXVQM
Пікірлер: 50
@brettsauve221 Жыл бұрын
It did help for sure. Very knowledgeable. For someone like me that is capable but lacking the knowledge of how to this was terrific.
@jenr6775 Жыл бұрын
Thank you so much for this video ! You made it super simple and I appreciate the fact that you left measurements. I’m currently dealing with this. Thanks again !
@paulinoeugenia26602 жыл бұрын
Pull out the speed sensor first or be ready to pay close to $300 For a New one.
@coolblue40778 ай бұрын
What are the torque for the axle nut And the 3 bolt on the hub ? I’m working on a 2021
@damonf94757 ай бұрын
Do you have all the torque specs or can you list them in the description?
@coolblue40779 ай бұрын
What are the torque specs on hub bolt and axle nut on 2021 Toyota Corolla LE in foot pounds
@chefboy_rr2 жыл бұрын
Everything, went smooth until having to put the caliper back on. It won’t fit over the break pads maybe needs an inch of clearance
@chefboy_rr2 жыл бұрын
Didn’t realize you have to use a c-clamp to push your caliper piston back in if your replacing your brake pads with new ones.
@doncastro1965 Жыл бұрын
How many pounds of torque should I tighten the axle shaft nut to?
@williamelliott3942 Жыл бұрын
216
@kodys_corolla2 ай бұрын
thank you
@costakis78958 ай бұрын
I have the same corolla hybrid 2020 hatchback and at 18k miles both front bearings failed, also had steering rack replaced, and couple of bushings because of rattling noise, all good now but i am very disappointed with Toyota, i am thinking of selling the car while its still under factory guarantee,
@Universalcode-cv6ge4 ай бұрын
That’s crazy. I have 180k miles on my 19 hatchback. Only just now having a rattling sound (bushings I think) and one wheel bearing out.
@egranado90443 ай бұрын
Can you recommend me a good bearing brand for my 2020 Corolla please
@ericblaine13162 жыл бұрын
Great video! Thank you for this, tackling same job tomorrow. What are the torque specs for the hub assembly bolts and the axle nut?
@GEARMOAUTO2 жыл бұрын
Hey thanks for the comment, I am going to have the torque specs available on the description by Monday. If you end up waiting till then I can have the specs in the description box by then
@ericblaine13162 жыл бұрын
@@GEARMOAUTO 159 on the axle nut and 96 on the hub to knuckle bolts. That top bolt was a PIA lol.
@alphag524010 ай бұрын
How did it go? Mine is seized rusted to knuckle and ended up with dashlights even tho I removed sensor on time
@ilvale64399 ай бұрын
Hi, the lavoration for the hybrid version is the same?
@jassonnunez28047 ай бұрын
Is the rubber mallet necessary or I can do it without it?
@Don_e2104 ай бұрын
I would recommend it. Unless you are replacing the rotor, have at it with banging it out.
@cameronhall66232 жыл бұрын
question man i’m pretty knowledgeable about cars and i have a 2021 hatch and was wondering im getting some tire noise not too bad i jacked car up and shook the wheels back and forth and up and down had zero play and i have no squeaking just wondering what you think it is tires are original tires and car has 40,000
@alexiszambrano7592 Жыл бұрын
Thank you 👏
@edwinrios81597 ай бұрын
How to get it lose ???
@edwinrios81597 ай бұрын
The ball bearing does not come out
@frontlineltdfrontlineltd4072 Жыл бұрын
What was the mileage in km of this vehicle
@GEARMOAUTO Жыл бұрын
I don't remember but it was low mileage. It had bearing damage due to a impact on a curb
@frontlineltdfrontlineltd4072 Жыл бұрын
I had the same issue on 22k km
@LOLATYOURFACEify11 ай бұрын
How did you end up clearing all the dash lights? I have Christmas lights on
@alphag524010 ай бұрын
Did you damage something?
@LOLATYOURFACEify10 ай бұрын
@@alphag5240no - car drives perfect. But lights won’t reset itself
@alphag524010 ай бұрын
Were u able to clear them? I ended up w same and couldn't even replace hub... its seized Shit
@LOLATYOURFACEify10 ай бұрын
@@alphag5240 nope - airbag light, power steering, and engine light turned off when I unplugged the battery and let it sit for a day but everything came right back on when I drove it (assuming cause the speed sensor isn’t working) My bearings were also seized and we had to torch it.
@alphag524010 ай бұрын
Did u get it scanned? 😅 I did it on my brother's car damn lol
@Alisters_Adventures2 жыл бұрын
How does the wheel bearing go bad on such a new car? Is this common?
@GEARMOAUTO2 жыл бұрын
They hit a curb
@ahmedabdelmoniem53642 жыл бұрын
@@GEARMOAUTO I hit the curb too on a snowy day, and then I installed a part from UAE that was terrible, I am changing it again with an original one!
@Xachremos5 ай бұрын
I'm watching this because I suspect mine is bad. I hit a monster of a pothole on the highway. The type of pothole that has you yell "HOLY FUCK" and pull over at the next exit to check if anything is broken.
@shyne5637 Жыл бұрын
New cars these days lack quality wheel bearings already being replaced it’s a 2020 wheel bearings shouldn’t be bad after 1 year or 2 u can buy a car from early 2000s and the wheel bearings last 150 to 200 thousand miles never replaced u got these brand new cars these days 2022 2021 Hyundai elantras transmissions crap out brand new with only 2000 miles on them if that transmissions going bad on brand new altimas maximas with only a couple hundred miles on them I had a 2022 Camry thing already needed new rotors not even 1000 miles on the dash already had a brake vibration when u got a 2008 Lexus es350 with 100 thousand miles same rotors same wheel bearings same struts they aren’t makeing cars like they use to these new cars are so cheaply made the quality in parts agent down hill even oem dealer parts I’ve got were junk out the box brand new makeing these new cars with cvt transmissions smh not smart at all new cars are junk
@genmangler69 Жыл бұрын
Everything's made in china and i mean everything, when the time comes, they got us all by the balls.
@irfanahmad4480 Жыл бұрын
This car haybrid
@AFatherToTheFatherless7 ай бұрын
Failed to mention year, make, model, sub model, and engine size. Instant thumbs down 👎🏽
@DilanHamawandy2 жыл бұрын
Thank you
@joshuafelix1012 жыл бұрын
Do you need to do a wheel alignment afterward?
@fancybiscuit4472 Жыл бұрын
Shouldn’t change anything unless you mess with the tie rod