2020 Custom Kayak USB Panel & Battery Box, CHEAP, DIY | How to install | Step by Step

In this video I'll show you how to build and install a custom kayak dash power panel and a custom kayak battery box! It doesn't matter if you have the cheapest kayak from Walmart or the best kayak in 2020, this will work for you!! Follow along with my step by step build and anyone can do it!
Thanks for watching and remember to LIKE & SUBSCRIBE !!
Everything I used in this video is listed in my "DIY Gear" link below....
▶ Check out My DIY gear - kit.co/kayakusa
▶My Amazon page - www.amazon.com...
▶My Patreon page - / kayakusa
▶My Instagram - / kayakusa
▶ My Merch - teespring.com/...
▶FaceBook - / kayakusaonyo. .
▶ Karls Bait and tackle box - www.shopkarls....
( use promo code "KAYAKUSA" )
5 way adapter
amzn.to/2Mpbl9q
flat extention
amzn.to/2KfVxte
gland joints
amzn.to/2IviNgK
battery
amzn.to/2tyXE0H
USB dash kit
amzn.to/2MWiEql
dry box
amzn.to/2tH1hAL
deckmat
www.austinkaya...
Yakattack anchor HD anchor trolley:
amzn.to/2tyVZIv
Here's links to the gear I use.....
Filming: Kayaking:
Home studio camera: My kayak:
amzn.to/2IvsA6t amzn.to/2yISGUf
Olympus TG870 action camera: Yakattack BlackPak:
amzn.to/2KlZOqF amzn.to/2tH6g4r
GoPro Hero 5: Paddle leashes:
amzn.to/2Km4pJv amzn.to/2KqjGcr
GoPro Hero 4: Fish Finder:
amzn.to/2N2pJWs amzn.to/2yNDDZe
GoPro remote: Anchor system:
amzn.to/2N0OBO0 amzn.to/2lA7jj3
Battery bank: Camera monopod:
amzn.to/2lz4WNz amzn.to/2N4lmtE
Rode Go Mic: Country Bound towels:
amzn.to/2KrZiaE amzn.to/2Ks1rmI
Rode Dead Cat mic cover: Mystery Tackle Box:
amzn.to/2yGZaTo mtbfish.com/kay...
125GB Micro SD card:
amzn.to/2txOK3E
#kayakdiy #kayakbattery #kayakfishing

[@garyvannote6192]

Something you may consider adding is a plug for a trickle charger , that way you can leave the battery inside the kayak while you charge it when you get home.

[@anthonyvespia6662]

Hey bro, I have my Tempest 120 PDL. But I purchased the hybird edition. #1 Hoodoo makes a factory 46 lb thrust trolling motor, that sits where the pdl would, and weighs 18 lbs. #2 I knew I was going to run the bixpy J2, on my toe control, drop down rudder system. I DIY'D my battery box, for my 12V cabela's battery, FF, and GO-PRO, and other charging accessories. I purchased a 30 cal ammo box, that identical charger panel from ebay. My cockpit and front storage hatch, and actually my hull, deck, rudder system is exactly the same the vibe's. This is my 1st kayak, and see no reason to upgrade. I was going in that exact spot, but cringed at drilling those 3 holes, in my new boat, lol. Great job. Love watching your DIY'S your just like me. Gotta be perfect. Haven't had any issues. 🙏 🎣

[@ahilbilyredneksopinion]

First I was thinkin, why when my intire point is ta unplug from reality 🤔 then I got hooked,now I need one.thanks bud,way ta go....lol.

[@XxsteamerxX]

Great vid. One point of note: It's always a good idea to make that hot lead go to the covered half of the plug so If I were you I would have used the other half of the extension cable on the battery. That way when you are moving stuff around or anything, you don't have a live end exposed.Just thought. It's nice that Kayaks are plastic so there's not as much concern, but you never know when and where that thing rubs against earth ground.

[@zakerid]

I would’ve put a fuse at the battery too.

[@stevenobryan1764]

Great video, I like your teaching ability, two things i would add is a fuse to the battery, and an on/off switch, to conserve the battery energy. Thanks keep up the great work, Kayak on.

[@lajoytoney7641]

Do you have a switch in mind that you would Use? Jw for my set up. Thanks in advance

[@earlypsd]

Hey man, fyi. Uni bits (step bits) are great for drilling plastic. They leave a very clean edge. The harbor frieght 3 pack is actually pretty good too. I’ve drilled 1/2” plate steel with the largest one in the pack and it still cuts fine. I enjoy the videos. 👍

[@KayakUSA1]

Thanks bud! I actually only use those now lol, those perfect for these kayak projects! Great tip man! Thanks for watching 🤙🏼

[@barrystephens900]

I realize this is a older video but a step bit works MUCH better than a paddle bit.

[@vikingxd8644]

Nice vid, I would definitely use a hole saw bit with fine teeth, not the spade bit. You'll get a cleaner hole and less chance of a chip. Lots of good ideas!

[@ThisTall]

A little plumbers pro tip for this silicone step @16:40 Once you let the silicone squeeze out, before you touch it, spray some soapy water all over it, then you can trowel it out perfectly without it smearing and sticking to anything it wasn’t touching before you sprayed it. If you haven’t tried this, you’ll thank me.

[@jenbilbrey1089]

Nice video. You do a real good job explaining what you're doing and the benefits of that. First time I've seen your videos love it. I have to do this same install anyway thank you

[@jonvancetattoo]

One of the best ,most clear and concise videos on KZbin!

[@KayakUSA1]

Thanks a bunch man!

[@cliftonwhite378]

Thanks, this is the best video on the subject that I found. You didn't make it too complex or confusing. The foundation I needed.

[@steveunversaw3070]

Nice video, but removing kayaks materials(ie cutting holes) use a holesaw not paddle bit ! In case you change your mind and need to patch the holes ! Excellent video, keep up making more!

[@Jack_The_Biker]

Instead of crimp connectors they make low temp solder shrink connectors, they have adhesive in them as well which will aid in waterproofing. Just a suggestion though if the crimps are working for you then no need to change

[@joehensley8139]

In the future use a hole saw, they already have a pilot bit and they cut much cleaner. Great video, very helpful.

[@itsallaboutwins5493]

After watching a few of your videos, I've finally figured how I'm gonna rig my OK Trident 15. So thank you for that! I ordered about $800 worth of stuff. I was initially going to use a RayMarine Dragonfly 4 pro, but my scupper transducer mold is molded for a regular one. I plan to mount a 22AH battery in the front hatch, using the same connection method as you. One connector is going to a 5 gang toggle switch panel that will run my 3 navigation lights on one switch, my red interior lights on one switch, and my under the kayak green light for bait fish on one switch. The other two switches will be for on down the road. I'll hard wire my fish finder to another sae connector and leave the other two for later. The two flush rod holders I have behind the seat will be fitted with 1 1/4 PVC pipe and with a 2x6, I'll add a 30 lb thrust trolling motor with rod holders integrated on the space between the flush mounts. So thank you for giving me some ideas. Also, your Amazon link for the RAM track mount that fits the hook2 is a dead link.

[@billholder253]

I used a 12 volt solar panel from Bass Pro to keep my deer feeder charged and another one in the deer blind to keep a charge on the 12 volt battery being used for the lighting, USB ports and other 12 volt accessories in the deer blind. This solar panel was mounted on top of a PVC tube with mounting hardware, like flagpole mounts. Worked great. Just an idea for you to help keep charge on 12 v battery that way there is no need to remove the battery when charging. There are a lot of videos on KZbin doing Solar Charging for Kayaks, Canoes and Rafts. There are many types of panels, systems to choose from. Check into installing a 12 volt solar panel for use on your kayak.

[@rickblair9706]

Bill, how did you wire the solar charger to the battery? Given CJ's design in the video, can charge through the 5 way adapter if you have a solar charge controller, fuse box and master switch for all the accessories?

[@billholder253]

@@rickblair9706 From the Solar Panels, take the positive wire & connect it to a In-Line Fuse (7 or 8 amp; Take other side of In-Line Fuse to the Positive input on Charge Controller (CC). Using a 50 Amp Charge Controller as an example.Then take the Positive output from CC to another In-Line Fuse, ***rated as same the Charge Controller Amperage capabilities example: a Charge Controller handling 50 AMP's - Now take the output side of this In-Line Fuse and connect it to the Positive Side of the Battery being charged. Start back at the Negative side of Solar Panels & connect to the Negative Input side of CC; Take the Negative Output side from the CC & terminate it on the Negative side of the Battery being charged. Hope this will help you out. Here is a simple Diagram: I-> (matches CC's Amp handling) Solar Panel's positive + ---- inline fuse----CC---^inline fuse--- + ---Master Switches to other Accessories positive Battery negative Solar Panel's negative - --------------------------CC------------------------ - ---Master Switches to other Accessories One could also connect a Power Inverter (convert DC to AC) directly to the battery for running AC accessories.

[@billholder253]

@@rickblair9706 If you have an external battery charger, for instance - setting in your garage, why not connect a set of waterproof connection wires directly from battery to a water plug on boat, then another set wires connected to external AC battery charger source: Diagram: + O------------------- waterproof plug--->

[@rickblair9706]

@@billholder253 , thank you so much, great advice and ideas. I was thinking about installing an SAE adapter on the YAK and charging that way into the box for both the solar(using a solar charge controller) and 12V charger.

[@lebleup]

Cool beans . Set up dual battery packs( NOCQUA 10ah/DiaMec 9ah) and the set up for USB /Cig Liter /and volt display you feature for power flush mount easy access on Hobie Outback. Quick easy. Gonna ride the water like a fiend in a Cadillac. Pinky stick in’ out and lean in’ to the side.

[@funnthesunoddjobs684]

just purchased a Wilderness 115 to start my Kayak fishing adventures with my Sons and stumbled across your how to vids... AWESOME Info. Thank you, you have answered a lot of our questions and given us some great ideas. in these how to vids.

[@KayakUSA1]

Thanks bud! I appreciate the support! Glad I could help y’all out!🤙🏼

[@ChrisSlowens]

Love your videos. Just picked up a Vibe Seaghost myself and one of the deciding factors was your channel. By far the best modification videos I've seen so far! I'm super nervous drilling into the hull, but these videos definitely make me more confident about it.

[@sandrarattray1202]

Thanks for posting this video...one of the most comprehensive and clearest step-by-step explanations for wiring setups in a kayak. Truly appreciated.

[@KayakUSA1]

Thanks for the kind words! I'm glad I could help and thanks for the support👍🏼

[@jaxsonbreedlove2889]

I am about to get the 2019 vibe sea ghost and this is exactly what I am going to go off of for my yak!!

[@JonMichaelDeBona]

You can get your holes to line up easier if you just go ahead and mount the plate, and then use a hole saw instead of a paddle bit. Just start slow, and you can adjust the position of the arbor bit on the hole saw. You'll get a perfect hole every time.

[@bwarholak]

This is exactly what I needed to see for what I’m planning with my SeaGhost 110. Thank you for this video. You just got yourself a new subscriber!

[@fishondudejulian4755]

That was the best and most informal video of any KZbinr of any category I’ve ever watched. Great video !!

[@KayakUSA1]

Julian BMX for life , Thanks bud!! I'm glad I could help! I appreciate the support!👍🏼👊🏼

[@tryn2goprobrozachwebb629]

I really like how you set that battery box up. Nice to have a voltmeter on deck. I've been looking at buying a kayak (3 waters big fish 120) and was looking into fish finders and lights. Really think the way you did that with the 5 way is what I'm looking to do. Thank you for the great tips.

[@KayakUSA1]

No problem bud, thanks for watching! Be sure to subscribe and share 🤙🏼🎣

[@beatfarmerfan]

Tryn2GoProBro Zach Webb I have a Big Fish 120, and I will say you can’t go wrong with it. I am 6’3” and 255 lb. and it is very stable. I love mine.

[@Beyondthebackyard-au]

So glad I have found your channel, you seem to find the perfect fit products for the job and point exactly where to buy them. Thanks.

[@KayakUSA1]

Thanks!! I appreciate the support!! Stay safe out there 🤙🏼🎣

[@davidhefner5668]

Power to dash needs a cut-off switch because volt meter and blue lighted USB ports draw power...which will drain your battery. Also you can add a fuse

[@jwrhynejr.6689]

Absolutely great setup for your kayak! Thanks for the viewing!!

[@beast-mode9338]

Could definitely use these! The wife, kids and I go fishing all the time. had a set I used to dry the dogs they are amazing! bought myself a new Kayak last week waiting for it to get shipped in cannot wait to get it and throw all the stuff I've bought in it. Camping will be in our near future as I plan to fish lots of Kayak Tournaments!

[@JungleJimAB9AB]

Excellent video. This is a great example of what DIY videos should look like. Please keep them coming. Thank you for posting it.

[@KayakUSA1]

Thanks for the kind words! I appreciate the support! More DIY vids on the way🤙🏼

[@la7era1u54]

I literally have 3 of those batteries laying around here, brand new. We use them for our gate. I'm definitely using 1 or 2 for this

[@IOWNJUNK]

That look as you're about to drill big holes in your kayak, I know what that look feels like.

[@geoffhenson9913]

New here to the site. Just going to say. Don’t forget about USB to cigarettes lighter adapters. Just another option. Great videos. Man I hate drilling holes in stuff.

[@TheDcrocks1]

Adds make these great channels a chore to watch.

[@SuperNitrohead]

Great Vid well done!! To take picky 1 more step. I saw something I would do different, as a former electrician. The wires hanging out of your battery dry box "could" short on something since the hot wire is the exposed term of the connector. Now there is a conflict with my comment due to the color of wire used by the manufacturer of the connector. Obviously not your error. When using a connector which has only one way to plug together the color used is kinda a non issue since the color is not used to do the final plugin. As long as the color reversal for that specific connector is maintained all will be good.

[@joshstockman7285]

Just got done with this install. Sharing it as it absolutely kept me from pulling my hair out. Ordered all the items on the list above plus a 12 volt marine plug. Awesome video brother.

[@KayakUSA1]

+Josh Stockman , Thanks bud! Glad I could help you out👍🏼 Thanks for the support👊🏼

[@herb2694]

great video. I especially like how detailed you are on the "how to" of your projects.

[@KayakUSA1]

Herb Carter, Thanks bud! I appreciate that!🤙🏼

[@brentwhitmire2089]

love this battery box idea...

[@adventureswithken1983]

Normally I watch about 8 or 10 videos and leave some comments to see the channels interaction with its viewers before I subscribe, BBUUUTTTT that Obamacare sticker made me sub after watching just two videos! Nicely done Sir, nicely done!!!

[@adventureswithken1983]

Also where is the link to the guy who showed you how to do the port set ups? Id like to see his as well to look at different option. thanks

[@KayakUSA1]

ENC Outdoors , "Lord deliver us from Obama care"..... Lol , I found that sticker a long time ago and had to add it to my bench. Here's the link to the video that helped me find this setup. kzbin.info/www/bejne/ppqadWWir72lp9E thanks for watching👍

[@adventureswithken1983]

Does the 5-way wire have a fuse in it to prevent any issues? I've been told by an electrician I will need a fuse in the lines someplace.

[@KayakUSA1]

ENC Outdoors , I don't have one on the five way it's self but I put an inline fuse between the five way and each thing I plug to it. ( Fish finder, lights, camera....)

[@richdunn9774]

I madethat same battery box. I used PCs of foam wedged in to keep it still. I cut up one of the ones people’s use to kneel on when gardening. I put an inline fuse inside the box too.

[@craigmonteforte1478]

cool deal buddy i want to do something similar for a canoe ive been using one of the dry boxes from Walmart for years on my Sport Fisher boat i glued mine down for everyone’s wallets cell phones , etc btw on Ebay they do sell pretty cheap battery tenders Chinese made that may be something you want to have for topping off your battery at home for me i’m going with solar because the canoe will be used mostly on a rural river in Florida

[@Balauie]

still waiting on my yak.. I'll be back... to this vid when it gets here. Nice job.

[@rdwilander]

Fantastic vid great instruction/explanation and camera work. Putting all the Amazon breakdown super helpful for budgeting. Music Volume at entrance and exit needs to be adjusted down little overpowering but all goood. Thanks again.

[@joelp3009]

Another good video. I know it’s a year old , but the reason I’m watching is I’m getting a Jackson Cuda 14 . Step up from the Walmart Kayak that I purchased first to see if I would enjoy it . Well needless to say I do. A lot of the mods you have done is what I want !

[@Thebunholio]

That over 25 bending over for something sound. I felt that at 30:09

[@MarvinDSancho2011]

lol bro the look after the first hole. 😆😆😆😆😆😆 So worth it

[@WILKINSOUTDOORADVENTURES]

Watched a lot of videos on this...this is without a doubt the simplest one to follow. Excellent job of explaining all of this in detail. Great job..hit u with a sub and a like

[@KayakUSA1]

WILKINS' OUTDOOR ADVENTURES , Thanks bud! I'm glad I could help you out! Thanks for the support!👍🏼

[@JerichaP]

I pictured you slapping someone with a footlong sub sandwich and walking away with a thumbs up. It was a detailed video though. 🥪👍🏻

[@Jim-ub9qy]

I'm a fairly new subscriber and just now going back through your videos and watching them. Your channel is one of the best and I learn something from each and every one of them. This one was especially interesting. Really well done. Thanks!

[@KayakUSA1]

Thanks Jim! I really appreciate the support! 🤙🏼🎣

[@aviator1352]

Your tutorials are always kick ass. Great job friend.

[@KayakUSA1]

aviator1352 , Thanks bud! I appreciate the support!!!👍🏼

[@michaelreyes2883]

Best video on battery pack, installation, and connection! Thank you

[@bluedoggey]

Merry Christmas!

[@bullyakker]

the slots allow any water that infiltrates to drain out of...the bottom. marine grade sealant the screws, top and sides and around the larger holes. if-when it fails, water will drain out of the bottom (weep holes)

[@jasonrowland832]

Nice job. Next time use a hole saw, it's a much cleaner cut in the plastic and easier to control.

[@jeffcarter341]

Installed mine today. I didn't use the rectangle bracket as that left a bit more room for my thru-hull wiring grommet for my transducer cable. Built my battery box the same way but with some of the extra cautions provided in these comments (extra shrink tape, for example, real marine silicone and dielectric grease). I haven't installed the pass through to take the power and transducer cable to the fish finder yet as I am not sure exactly where I want the finder located on my track system. I only want to drill 1 more hole. LOL.

[@joses_builds]

tip for next box use the connector end that has the hot wired covered instead of the open end. to keep it from arching off of things.

[@jakemistyeaster1014]

Thanks for this video. Just completed this on my SG 110, works great!

[@adambomb215]

this video was great. cant wait to make my own

[@onanysundrymule3144]

Good work and good job Sir. The only flaw I can see with that panel (excepting the ommision of an inline fuse) is the fact that those damn panel lights will put a constant draw upon the battery. Leave It hooked for a night or two, and the battery will be depleted ( this is a pragmatic observation, not a critique of the method and mode of installation, which is excellently expedited). Kind regards.

[@aftech7268]

Did the same mod on mine - u Just need add a solar panel port to trickle charge the battery thats what i did on mine… also u need to add an on /off switch inline because that dash panel is constantly on , u need a way to turn it off when not in use.. i like your Velcro design for the battery and additional connections i used foam noodles on mine and only use the connection for the dashboard

[@castncatchem3808]

Nice clean install

[@paulmathews2482]

Awesome video and info links. Ordered most on the list. New kayak shows up Monday and I'll be giving installing this setup right away

[@CompassAngler]

New to yak fishing and your channel has taught me a ton 💯🙏🏼

[@KayakUSA1]

Compass Angler , Welcome to the Yak Squad! Thanks for the support🤙🏼

[@markie871]

I finally got the kayak out the other day when it warmed up. Got the mount up in the garage for storage and got my yakattack gear tracs on. My hobie through hull things just got in tonight. Hopefully i can get fish finder up and running soon. Need to pick up some fuses before i start. Took most of my ideas from you so gave you credit. Of course these mods are going into a $180 kayak! Lol

[@markie871]

kzbin.info/www/bejne/r2HZqmihrLujf9E

[@markie871]

First time doing anything on youtube so learning but having fun! Don't think ill be able to do trolling motor mod without adding out riggers to the yak. Have to see how it goes.

[@markie871]

I do love how light it is. Lifted it up into the rack, solo, on the wall, at the end of the video.

[@Thebunholio]

They sale a flat sidewall port SAE connector for a out $12 on Amazon. Its weatherproof and adds a cleaner look.

[@tegan6167]

Merry Christmas

[@jeffreyhodge3088]

Great video. Exactly how I rigged my Catch 120. Thanks for the instruction.

[@DopeyDiceman]

A great quality video, Love the way you explain everything. I'd love to see you install and wire up a trolling motor someday!

[@KayakUSA1]

+TheRogoa , Thanks! I actually have that video on my "to do " list. So look for it to come in the future. Thanks for the support and thanks for watching!👍🏼 be sure to subscribe and click that bell👍🏼

[@Reddog69-h7z]

i would of put a on off switch on that so you can turn the display off so there is no drain on the battery when it's not being used it will just make the battery last a little bit longer between charges

[@glenndavis6120]

Thanks for another great video. I will be using this for my ascend FS12T as soon as I figure out where to mount it.

[@KayakUSA1]

Glenn Davis , Glad I could help! Thanks for the support! 👍🏼

[@crankbaitmaster6457]

First time I watch your videos and won’t be my last great video a lot of details.am actually planning On buying a seaghost and this is a great idea for waterproofing the battery

[@KayakUSA1]

+Wayne Roa , Thanks man! Glad I could help! Thanks for the support👍🏼

[@codyboatman2913]

I have been trying to find a good video on this and this is the best one thanks!

[@KayakUSA1]

You’re welcome, thanks for watching

[@brucesnyder939]

New subscriber here. Very clean work. Once I started watching I just had to see what else you had to share. Gave me quite a few great ideas. Good job on the video!

[@KayakUSA1]

Thanks Bruce! Welcome to the Yak Squad! Thanks for the kind words and support!

[@bobharold86]

So glad I just go out fishing, just to fish.

[@KayakUSA1]

Me too.... 🙄

[@sharpuslf]

I'm subbing just becauses of the parts list. THANK-YOU !!!!

[@KayakUSA1]

Thanks for watching and the support!🤙🏼

[@raynestormwayne7849]

Be advised that the gasket on those “cheap” waterproof box will decay within a few years or less due to heat and UV. The material (white gasket) goes liquid and very sticky, makes a mess.

[@RonMTube]

That’s exactly what happened to the seal on mine.

[@devildog1971]

Awesome video. Great job explaining and documenting everything. This is exactly what I was looking for, I have been planning to the same setup.

[@KayakUSA1]

HavasuMark , Thanks for the kind words, Im glad I could help you out! Welcome to the Yak Squad👍🏼

[@riffsandwich9541]

This is so sick...I need to do this to my boat now.

[@froggin_with_tom8955]

Merry Christmas TJ and Family

[@caseymclamb5890]

Thanks for the video man, helpful stuff. Liking the W.W.J.D bracelets, haven't seen those in a while.

[@KayakUSA1]

Casey Mclamb , Thanks man! Yeah, I love my WWJD bracelets, I still have about 4 or 5 left over from the 90’s... lol Thanks for the support bud 👍🏼

[@richmaiorano]

I feel his Pain of drilling into a brand Kayak was working on mine today and the damn hasn't even seen water yet because of all the rain we are getting here but I got the Pescador Pilot and will just be using a single USB w/readout no room for the box but am sure will find a use for it JT your doing great

[@westleyben6980]

instablaster

[@barrystephens900]

I’m going to build the same box and add a toggle switch between the battery and the plug.

[@3of930]

Good video. Shows me where I can use up less space than I’m using now. I also installed a voltage regulator on my power system to insure stable power. I’ve got a lot of different items using power. Also, I installed a power switch and indicator for each unit using power. I don’t have a panel to mount my power outlet to, but I’m sure with some Fiberglas I’ll get it done.

[@chucksmith5002]

Most definitely use the Butt Connectors them other ones will go bad on you . I have replaced a many of them do to corrosion .

[@SHWELL11]

Great job, I'd say adding a Fuse is something I wouldnt hae left out.

[@FlexDRG]

A fuse and a power switch... Now it is a constant drain even without anything plugged in.

[@starclawsgaming]

"Can't believe I'm drilling holes in my brand new kayak" ahaha I plan to say the same thing in the future

[@dustinroberts8487]

Merry Christmas! You the man!

[@calebasse3110]

Super ! Hi from France ! 👋😉👍👍👍

[@Felground]

Nice video! I was going back and forth between getting a vibe or t128. You helped me make a decision!

[@KayakUSA1]

patrick milhous , Thanks man! Glad I could help 👍🏼, Thanks for watching!

[@MSmith-jf5wo]

I hate to say it, but the Positive junction from the Battery should ALWAYS be protected from touching anything. (Like on an automobile, where it doesn't matter if the Ground wires touches anything else that's Grounded). Just a little "Hint", for future reference.

[@Mikisa1278]

M. Smith Now that you've built this drybox system... is there anything that you would've done different to make it better? Mikisa

[@MSmith-jf5wo]

I didn't make my box that way, but his is just as good...! Always keep the Power (Positive) contact insulated from everything else.

[@matthewantel8821]

I agree with the positive post comment. One more thing to add.... I am going to be building same exact setup but will be adding my fuse right off positive terminal before exiting dry box. Any thoughts why this wouldn't be effective at protecting all accessories without the need for multiple inline fuses?

[@MSmith-jf5wo]

Having a fuse holder (and fuse, of course!) directly off the Positive side of the Battery should be good for all your needs, but maybe NOT for any specific electrified item. Maybe your Fish Finder uses 3 amps of current, but your boat lights require 5 amps. If you run them both, that makes a total of 8 amps! Neither your fishfinder nor your lights are protected, should something happen. A good weatherproof fuse holder, coming off the battery should have a maximum total of ALL your electronics, but I think it would be wise to have a separate inline fuse for your most Precious (the fishfinder) just in case. Think about how vehicles are wired, and you can't go wrong. (Each electrical item has its OWN fuse, just in case! Also, match your loads with the proper wire gauge. Small wires pulling big loads, means voltage loss due to resistance! Make sense? Hope this helps, my Friend... (Things to "Ponder"...Hobie electrical fittings are not totally "waterproof", but have good water resistance, and 5-Minute Epoxy is NOT waterproof, at all...!)

[@jeffcarter341]

I have put an inline waterproof for each of the lines to the battery. I only have 2 so far, fishfinder(3a) and the power outlet(5a) listed in this video. 2 more open ends using the splitter in this video for lights later on. Also ordered a $10 attachment for my genius g7200 charger that will let me connect directly to the SAE plug to charge the battery. Don't even have to open the box! I am sealing the electrical fittings with silicone. All my connections have heat shrink over them. Looks good so far, time will tell though. Thanks for the video and links.

[@brandonmacklin4224]

You sir just gained another Sub!! Awesome job.

[@KayakUSA1]

Thanks man!

[@tezzaskayakfishing]

Merry Christmas TJ

[@ericgraalfs1064]

Just watched your video, it's great. Just what I was looking for to help be with my new sea ghost 130. Looking forward to your other videos as I outfit my rig!! Subscribed!!

[@KayakUSA1]

Thanks Eric! I have some BIG plans coming up for my Sea Ghost 130 (Nemo) Cant wait to show you guys what im doing to it next, im awaiting everything i ordered to come in the mail now. Thanks for the support and share if you can!

[@rickysapp9834]

Merry Christmas!!

[@aidencameron1701]

Merry Christmas 🎄

[@mauriciomaisonnave4185]

Great Job! Im a new subscriber to your channel all the way from Brazil!

[@KayakUSA1]

+Mauricio Maisonnave , Awesome!! Thanks for the support!! 👍🏼

[@molldan]

Merry Christmas!! Don’t forget the real reason we celebrate!!

[@backwoodsrated864]

You should sell kits with premade battery boxes and pre made wire harnesses for the seaghosts.

[@KayakUSA1]

that's not a bad idea! Thanks for watching and for the support!

[@backwoodsrated864]

Kayak USA, Thanks for such a great tutorial! If you decide to do it let me know. I'll be your first customer. It's cheaper buying stuff in bulk... and I don't have a shop, wire connectors, shrink wrap or anything so I'd be happy buying it ready to go! I'd just have to drill the holes and plug things up. Easy enough lol.

[@jason73777]

Solved a lot of problems I was having trying to do a similar project. Thanks!

[@TWIZTID_Man_Boy_4Lyfe]

Found this looking to set up the fish finder, thanks