There's a lot of people who do this themselves say they have never had to adjust valves. Doing this every 100 hours is a bit silly excessive. Valves out of spec are usually pretty loud so one thing you can do is just listen to the engine at idle. The only way the valve clearance can change is if you had excessive wear on either the cam lobe or the plate/shim. That should not ever happen unless you starved the engine of oil, but you'd have bigger issues at that point. Every time you remove the valve cover you need to replace the gasket or it will start seeping oil.
@cornerstoneranchparadisetx37893 жыл бұрын
I just did my 200 hour service and I did not check the valves this time. I was mainly doing it at first to have evidence if I needed to have a warranty claim. Now that it's good and burned in I'm not as concerned about it.
@RPG-oh1yf3 жыл бұрын
@@cornerstoneranchparadisetx3789 Good deal! Just bought a 2020 FX LE last month. What a great machine! I did replace the differential and transmission oil at 100 hours and it needed that!
@cornerstoneranchparadisetx37893 жыл бұрын
@@RPG-oh1yf Yes sir, if you change the oils it will run and run and run.
@stanleyborys59652 жыл бұрын
Great video. Thank you! Quick, to the point. Better than most "professional" vidoes!
@cornerstoneranchparadisetx37892 жыл бұрын
Glad it was helpful!
@Dendro20013 жыл бұрын
Thanks for taking the time to share! Did you take the plugs out? That will make turning the cams much easier.
@cornerstoneranchparadisetx37893 жыл бұрын
I did not the first time around. This last time when I did the 100 hour inspection (including the plug gap) and I did remove them, but not until after I had checked the cams. @ 200 hours I'll try to remember to take your suggestion. Thanks!
@ctwilley112 жыл бұрын
Thanks for the information! I can’t believe my dealer wanter $1,400 in labor alone for the 20 hour service. I spent about $50 and a little over 2 hours to do it myself.
@philliphall519810 ай бұрын
There cooks
@PRBB254 жыл бұрын
Really appreciate you sharing this.
@cornerstoneranchparadisetx37894 жыл бұрын
My pleasure!
@ABSScott3 жыл бұрын
Thanks for making this video and Happy New Year!
@MatthewJames.Tyson913 жыл бұрын
Thank you for doing this video! Could you please share the top view image of the exposed valves? I cannot find anywhere online for my records.
@cornerstoneranchparadisetx37893 жыл бұрын
I just took a picture of it with my phone and sent it to the printer.
@jamesspektrum76544 жыл бұрын
Great video. Can you give out the drop box link for the service manual?
@@Dendro2001 Thanks for posting that. I hadn't had the time to go digging for it again after losing my hard drive a month ago.
@philliphall519810 ай бұрын
Why are you having to adjust the valves , please explain why the work was needed??????😢
@hermannbischoff30169 ай бұрын
The manual tells you to do that in the first service
@KirkFreeman18354 жыл бұрын
This was really helpful! Can you tell me why your wary of manually turning the camshafts?
@cornerstoneranchparadisetx37894 жыл бұрын
I was concerned with turning it opposite of normal run rotation. Not really sure that is a justified concern. I got more comfortable with it as time went on.
@KirkFreeman18354 жыл бұрын
Cornerstone Ranch Paradise, Tx great, thx!
@cornerstoneranchparadisetx37894 жыл бұрын
Sure, glad it helped!
@RPG-oh1yf3 жыл бұрын
Which direction did the shafts turn when you cranked the ignition for a second? I would think they would turn anti-clockwise when viewed from the transmission belt side of the engine?
@josell8703 Жыл бұрын
I chek my mule 2023 and it have on exhaust.008 all and the intec side the one in middle is 008 and the other 2 are 006 idk is that even right runs good idk
@cornerstoneranchparadisetx3789 Жыл бұрын
I'd recommend you search for a newer service manual and see if you can hunt down the most recent band of gap tolerances. It's conceivable they've made a change in gap dimensions since I made this video. Also are you measuring in metric or standard units?
@gann77 Жыл бұрын
Thanks for the info. All the best.
@jamieschenck5846 Жыл бұрын
great vid
@lsxjunkie3 жыл бұрын
Great Video man! Is that a Lockheed shirt?!
@cornerstoneranchparadisetx37893 жыл бұрын
A very old and worn out one!
@lsxjunkie3 жыл бұрын
@@cornerstoneranchparadisetx3789 I work at Lockheed. Good video. Mine has right at 100 miles on it. Not sure if its worth the trouble to check the valves. It still cranks great.