2020 YAMAHA YFZ450R NATIONAL BUILD 2.0 part 1

[@cmmoto]

Why buy a brand new off the dealer if u can built one ..hahaha good job .i like the black and green

[@ononewheel7]

Thanks bud! With the amount of parts i would not use w buying a new one its cheaper to do it this way this year though i bought used frames instead of new ones! Its still yellow haha!

[@beatonracing7571]

Hell Yeah!!!!! Once you go black.... gonna look sick! Can't wait to see it done.

[@ononewheel7]

Thanks man! Wait till ya see the plastics/graffix!

[@nordicquad]

Very nice,i like the satin black and flat yellow.It feels so good to build a new quad from frame up with new parts and fresh powder.

[@ononewheel7]

Thanks man! I am liking the combo cant wait to get the plastics and graffix and really see it come together!

[@jovanilsonpimenta1532]

Esse Quadriciclo vai fica uma máquina 🙏😍😍💯🤜🤛

[@ononewheel7]

Thank you

[@edwardrichards9181]

Awesome color choice! Would love to see a video of how you set up your front end.

[@ononewheel7]

Thanks man! I can do that when this things ready to ride!

[@867diesel]

dude this new bike is so sic looking . love the colors . this bikes favorite song must be black and yellow lmao

[@ononewheel7]

Thanks man i cant wait for it to be finished so you guys can see it all done w the plastics and graffix its gna be sweet!

[@867diesel]

@@ononewheel7 the first race its in will look so cool

[@brigidasousa636]

Can’t wait to see it with the plastics on

[@ononewheel7]

Me too Thanks babe! 🥰🥰🥰🥰🥰

[@joenewberry5912]

Me and Mike have been talking about building a cannondale in the exact color scheme lol. Awesome video John. Didnt notice the video was over 30min til was done !

[@ononewheel7]

Nice! Thanks for watching thats nice about time lapse it actually goes by quick!

[@nicolascastellini5365]

You are great dude!! I've seen all your videos and I will do a full rebuild of my 2010 YFZ 450r taking yours as example. I'm from Argentina and my last race was the Enduro del Verano (you can see a lots of videos in KZbin). Looking forward for part2 and the rest of the parts to arrive.

[@ononewheel7]

Awesome man good luck with your build! I will check those out for sure thanks for watching! It may be a little while with everything going on some parts are not gna ship any time soon 😫

[@danmcgivern1345]

Bad assssss! Always love watching your videos.

[@ononewheel7]

Thanks man i appreciate it a ton!

[@mikeeeg2010]

Great job! It looks good so far!

[@ononewheel7]

Thank you!

[@synergysynergy]

New colors looks on point buddy, build is looking ace. Those Bnr Fox Floats... I dream about them 🤤🤤

[@ononewheel7]

Thanks man! Yup no more air shock all springers now they are awesome!

[@bjarkisigurdsson3016]

I have been waiting for another build from you looks really nice bro.

[@ononewheel7]

Well here ya go haha! Thanks man its coming together nicely and better than i had imagined i had more parts show up this week so i can get part 2 going soon!

[@fredneckday7541]

Love the new color! Nice woods shocks.

[@ononewheel7]

Thanks man! Those are new fox gen7’s 🤣🤣🤣🤣🤣

[@fredneckday7541]

I do the same when I send the Öhlins to rocket Ron.

[@ononewheel7]

fREDNECKday haha ya but are they gen 7’s lol!

[@fredneckday7541]

Nothing but the best for you!

[@ononewheel7]

fREDNECKday oh ya haha!

[@themarkedoffgalaxy]

That things flippin clean!

[@ononewheel7]

Thanks man and thanks for watching! Stuck waiting on parts now some i have no idea when they will come as some places are shit down!

[@landenkasler1547]

Looks nice 👍

[@ononewheel7]

Thank you!

[@DocAtrox]

Love it!! BUMBLE BEE Build!!!

[@ononewheel7]

Thanks man!

[@700rRaptorLife]

WOW that quad looking strong 💪🏾 already bro good damn job man

[@ononewheel7]

Thanks man!

[@SixStarRider]

That is going to be one sick build 🔥 cant wait to see it completed.

[@ononewheel7]

Thanks man! Its coming together nicely!

[@LiveFreeOrRIP]

what belly skid are you going with. I cant decide for my 450 either plastic style or aluminum. Glann makes a 1/2 plastic one that looks tough as nails.

[@ononewheel7]

I am actually getting the glann innovations 3/8 belly skid!

[@andyperez4255]

Looking badass bro!!

[@ononewheel7]

Thanks man!

[@j_bj0rklund]

I am probably getting a 2007 YFZ 450 this summer : )

[@ononewheel7]

Awesome man you will love it!

[@Nick_smith578]

What’s the benefit of the aftermarket subframe

[@ononewheel7]

So not this past season but all others i would snap usually 2 stock sub frames a year so while starting to get parts for this build i figured this year i would try an aftermarket sub frame this one is from xcel and i think it may be lowered a touch but the aftermarket ones are much stronger vs stock so thats the main reason but i have to say this one looks pretty cool as well!

[@onedav1d]

💪💪💪💪💪

[@ononewheel7]

Thanks for watching!

[@raypow296]

Sweet bro love it

[@ononewheel7]

Thanks man!

[@jovanilsonpimenta1532]

Os dos Meu sonho ainda 🙏🙌 fé em Deus

[@ononewheel7]

Thank you

[@mattijsleerink5629]

good job!!!! how many yfz do you build in your live? xd how many parts do you have for a yfz 450? nice build as always!!

[@ononewheel7]

Thank you! I have a crap load of parts haha lots of old stuff hanging around i try and sell it all at some point or another i just keep some of the most common things that i break!

[@mototherapy9022]

Hey just curious what are you doing at 22:25 on the drill press? Also what steering stabilizer are you running?

[@ononewheel7]

I run a precision elite I was counter sinking holes for my sprocket bolts

[@mototherapy9022]

ononewheel7 right on! I’m just now starting to build a quad I recently switched from bikes! Your videos are awesome man! I’ve watched a couple of them and I usually skip through videos but I get zoned from beginning to end! Keep up the good work man your content is sick! 🤘🏻

[@ononewheel7]

Nice what are you building? Thanks man!

[@mototherapy9022]

ononewheel7 yfz450r. I plan to race it next year unless the doc says I don’t need surgery then it will be sooner! I actually live a mile from BNR motorsports they are real popular around here!

[@ononewheel7]

Moto Therapy nice! BNR is awesome your lucky being so close!

[@ColoradoDualSport]

Just what was done in this video would have taken me 3 years to complete. I know my mechanical abilities limit and stay in my lane LOL! What do you do for a living?

[@ononewheel7]

I am an electrical contractor i own my own business been in the trade for 25-26 years and on my own for mayb 15 now! I guess i can say i know the Yamaha’s pretty well as I’ve built a ton of them! I built the engine as well but i send the heads out for service and porting etc! These are really not too bad and if i get stuck i have another one built to look at too haha!

[@collinshell7792]

Hey man I was wondering who dose your powder coating because I need to re powder coat my nerf bars and front bumper and grab bar and subframe and number plate brackets and how much they charge

[@ononewheel7]

I use sportbike powder coating out of new jersey i did a video late December were i visited him and have all his info he does great work and has great prices as well check him out! kzbin.info/www/bejne/mKPMfZaGg811q80

[@nelsonchapple3943]

This is sick! I have a 2010 Yfz450r and I mx build it every year be there’s no point in getting a 2020😂

[@ononewheel7]

Thanks man! Ya w buying a new one i wouldnt use so many parts it would end up costing more!

[@FullSendRC220]

i love the fox gen 7s lmao

[@ononewheel7]

Chad wienen don’t even have these 🤣🤣

[@brad4010]

Like the black frame. Are you doing black plastics as well?

[@ononewheel7]

You will have to wait for part two hahaha its a surprise 😎

[@leocarvlogs]

Dream Goal just to build your own quad from home 🙌🏾😁

[@ononewheel7]

Oh ya man little by little she will get done! Thanks for watching!

[@leocarvlogs]

Can’t wait to see her finished & your welcome💪🏾

[@ononewheel7]

I cant wait either man it may be 4-8 weeks some parts i may not see until this virus crap is better 😫 Stay safe dude!

[@leocarvlogs]

Yeah tell me about it smh 🤦🏾‍♂️ hope this all dies sooner thanks man you stay safe as well

[@tp5179]

Is it the same width up front as stock or have you narrowed it at all? Thinking about getting one for the same type of riding.

[@ononewheel7]

My front end is like 46.5” and the rear i run about a 1/2” wider but i have the option to make it the same width or narrower w the adjustable axle!

[@ATVGBulgaria]

I wish we were on same continent, so I can gave you my Raptor 700R for fully cleaning and repairing process. Or if I were there to do it under your supervision!

[@ononewheel7]

That would be a fun project! Thanks for watching bud!

[@ATVGBulgaria]

@@ononewheel7 Always for you bro. This is looking insane. How many hours you spend on the whole build?

[@ononewheel7]

This video rite here is about 7-8hrs total so far That doesn’t include building the engine that was another 2-3hrs i think

[@ATVGBulgaria]

@@ononewheel7 And just few more hours to finish. Hope parts will arrive soon and second part will be uploaded!

[@ononewheel7]

Probably close to the same mayb i still have a good amount left along w parts not here and then do things like bleed brakes adjust toe/camber and go back and check all the bolts fill it w oil/coolant so graffix also take a little time too!

[@gelmersmotorsport]

Why are you drilling/countersinking the sprocket hub?

[@ononewheel7]

I run a custom skid plate w tapered bolts which need to be flush on my sprocket guard for my setup i will point that out in real time on part two so you can see exactly whats going on w it!

[@MrNascarrules]

You gunna be going to mountain ridge for the GNCC race may 2-3??

[@ononewheel7]

We will have to see what happens when all this mess is over i was planning on camp coker but all races are cancelled now till april 30th if that one ends up being a go i will be there!

[@MrNascarrules]

ononewheel7 if it’s a go ill see you there!! Stay safe!

[@ononewheel7]

You too man!

[@jeffchambers1147]

How do you change your steering stem bearing? Going to do mine but I just want to know if there is any special tool I need to buy before I tear anything apart

[@ononewheel7]

You will need a large diameter alan wrench socket to remove the retainer nut! Besides thats just basic tools be careful when putting that retainer bolt back in thread it in by hand 1st as it can get cross treaded easily!

[@jeffchambers1147]

@@ononewheel7 do you know the diameter of the Alan or an equivalent with a bolt that I could use the double nut technic

[@ononewheel7]

I have to find mine and measure it let me get back to you tom w that!

[@CrumbsideCrew]

damn shes clean lol i know she wont stay like that but damn!

[@ononewheel7]

Thanks man! The way its going she may never see a race this year 🤣🤣🤣

[@kawasaki9mx]

siiiiick!!! what's the name of that yellow color called?

[@ononewheel7]

This is just flat neon yellow its basically neon yellow w no clear coat over it!

[@Superflow66]

I been enjoying your videos and i just started racing Harescramble’s at 47 can you recommend someone to revolve suspension ?

[@ononewheel7]

Thanks man and congrats i use bnr motorsports check them out and tell them i sent ya!

[@Superflow66]

ononewheel7 thank you i sure will.

[@zacford3161]

This build is gonna be sexy!! Love to see a little change. Black or grey plastics would look awesome

[@ononewheel7]

Thanks man i am getting excited as we get closer to the end! Wait till you see the pastics and graffix they are gna be killer!

[@zacford3161]

ononewheel7 your welcome man! Can’t wait to see it at the races. It’ll definitely be a head turner

[@ononewheel7]

Zac Ford i hope we have some races this year the way things are going it could be june/july/august 😫

[@zacford3161]

ononewheel7 right. It sucks so bad

[@scotturban54]

So nice

[@ononewheel7]

Thanks man! I added captions to this one to test out!

[@BayCityBanshee]

Damn that thing came together nicely. Are those oem spindles?

[@ononewheel7]

Thanks man! No they are LSR spindles so it has the ltr steering geometry

[@fox13z400]

Who makes the see thru oil cover?

[@ononewheel7]

Jlsmotorsports tell him i sent ya!

[@ridinwitrel2249]

Name of the song The memory of you just come running by

[@Offroad-Flicks]

How much did this full build cost?

[@ononewheel7]

20k

[@Offroad-Flicks]

How much was it without the motor?

[@ononewheel7]

Not sure exactly but the engine build was maybe worth 4k i did rebuild it from cases up so.

[@Offroad-Flicks]

Well you did a good job imma try to build a yzf450r from sscratch

[@ononewheel7]

Thanks man have you seen my 2023 build series yet if not have a look i built another blacked out quad

[@michaelhorning6594]

I am amazed by your attention to detail on your builds. just curious but what does it cost to build a quad like that? I promise I wont tell your wife....lmao

[@ononewheel7]

Thanks man! I honestly lost track w this one but if guess 10k easy

[@michaelhorning6594]

@@ononewheel7 have you ever had one of the motors that you built on a dyno? i run an 07 yfz, an old school carb model. it will beat honda 450 dirt bikes all day,

[@ononewheel7]

Not yet this new one i plan on dynoing at bnr it should be around 55hp at least on paper will see what she does on the dyno!

[@anthonylabbate8345]

First question how the hell do u remember we’re everything goes. 2 what did the build costs you soup to nuts if you don’t mind me asking.... Awsome Awsome content though man thanks

[@ononewheel7]

I have a manual on my phone and a second complete quad for reference i i need it but I’ve built so many of these i just know were everything goes which is crazy! This build if you were to buy a brand new yfz450r and add the mods i did it would cost you 20,000

[@anthonylabbate8345]

Absolutely stunning though man really enjoy watching it thanks for everything maybe one day I’ll crack a case open

[@ononewheel7]

Thank you! The engines a really easy same deal grab the manual and just follow it i have done a bunch of engine videos as well in the past!

[@seancarolina375]

Wat color black is that

[@ononewheel7]

Flat black

[@seancarolina375]

@@ononewheel7 def wasnt expecting a reply on vid from 2years ago.. much love bro..!! Content is def 🔥🔥💯🤙🏼🤙🏼

[@ononewheel7]

@@seancarolina375 i always try to respond to the comments man. Thank you. Building another one like this soon.

[@867diesel]

man i really think them custom front shocks will be way too stiff for xc racing lmao

[@ononewheel7]

Hahaha they may need some adjusting 🤷‍♂️

[@867diesel]

@@ononewheel7 cant wait to see how low the maintenance is on them lol

[@ononewheel7]

867diesel none haha

[@artmace6717]

GNCC Art. No 521

[@artmace6717]

YAMAHA You ART 405 ,

[@LiveFreeOrRIP]

DUDE.... SERIOUSLY AT 20 SECS I SHAT MY PANTS... My 2 favorite colors. Hi-vis and dust black... Thats it im peeling my stickers off my machine lol...

[@ononewheel7]

Hahahaha! Wait till you see plastics/graffix 😎

[@tylernixon12]

First

[@cmmoto]

Tyler Nixon u beat me to it

[@ATVGBulgaria]

@@cmmoto He beat us all :D

[@ononewheel7]

Thanks for watching @Tyler Nixon