2021 BSD ALVX DREAM BUILD

[@BSDBMX1991]

Nice!!

[@lukasstipp_bmx]

Thanks! I love the frame, it’s the only bike with the perfect geometry for me.

[@BSDBMX1991]

@@lukasstipp_bmx cool! It looks good and your video is great!! :)

[@ahrondelacruz1108]

Can i have 1

[@lukaoss]

@@ahrondelacruz1108 nice try

[@ahrondelacruz1108]

@@lukaoss hehehe

[@brucemcelroy3186]

hey so, I'm a heavy equipment mechanic and one trick to get bearings to go in is to throw 'em in the freezer for few hours. when you take them out install them promptly before they have a chance to warm back up to room temp. maybe even heat the bb a bit but NOT with a torch!

[@lukasstipp_bmx]

Thanks that’s a great idea!

[@lukasjohnson8735]

truck and transport mechanic, loose the claw hammer also.

[@davidse1071]

A threaded rod a couple bit washers and two nuts you could make a squeeze press to install those bearing without hammering them or harbor fight make a tool that goes over them bearing so you wont chew of the bearing hammering it in.

[@M1lk5h31kh]

I almost had an anxiety attack watching him batter those poor bb bearings 😂😂😂😳

[@lukasstipp_bmx]

Lol yeah I really need one of those park tool things

[@Fax_my_pants]

@@lukasstipp_bmx at least use a rubber mallet buddyy

[@lukasstipp_bmx]

@@Fax_my_pants a rubber mallet can’t knock bearings in. The hammer works fine it’s just a little risky. As long as you tap it evenly around the outer part of the bearing it doesn’t damage anything.

[@M1lk5h31kh]

@@lukasstipp_bmx ahahaha Yh you really do bro! 😂😂

[@Benzillionaire]

@@lukasstipp_bmx place a peice of wood over the bearing to even out the force of the mallet, it drives the bearing in more evenly as well

[@Dougsterbob]

I'm big jealous. This looks niceeee 🔥🔥

[@lukasstipp_bmx]

Not for long 😉

[@danhbui8686]

Daddy

[@sharonthomas219]

I also

[@kristis3755]

Inglish

[@mt244dograu9]

Oi mim di Vouga ai

[@deejaytrizay]

Ho------LEE------SHIT! This is the single best piece of video ever recorded...EVER! AND...the best bike of all time in the universe.

[@lukasstipp_bmx]

Thanks lol

[@tanfeiluthfi2126]

Seriously,I'm fall in love with this bike.ahhh so jealous.

[@МихаМаккарти]

*_the video is perfectly shot! I would like to have a BMX like this_*

[@rajkumarbirajdar3565]

Yes

[@colin_ign]

@@rajkumarbirajdar3565 no

[@413_k7]

nice build, definitely upgrade those cranks as soon as possible, they’re cheap and when they break the medical bill will be a lot more than a new set

[@Croccolucho]

Bmx cranks don't break easily, you gotta put a lot of force, weight and pressure to break them, even if you have a 5$ set

[@413_k7]

@@Croccolucho your clearly a beginner

[@y4gz146]

@@Croccolucho bro my friend just broke the same cranks and they were a month old...

[@st4trips639]

@@413_k7 been riding for 6 years never snapped a pair of cranks except 1 piece cranks on my 1st ever bike

[@crxxpslvyr7887]

Samox cranks are bad? Please tell me

[@pietpeet7400]

Love this man big fan of you and BSD love your vids and bike looks fire

[@lukasstipp_bmx]

Thanks!

[@haribalcacer]

Awesome video!! Love the camera angles

[@goodmalan3421]

The protector you put in the peg and the painting goes inside hahaha

[@mategonczol442]

thank you for this tutorial… finally i can install my bb bearings😛🙏 and i can build my dream bike

[@mouski7056]

That quality is crisp af

[@arrowsplit8659]

I got my own custom alvx build today It’s so much better than my kush 1

[@lukasstipp_bmx]

Sick! 🔥

[@lauri_K18]

4:36 my head kinda hurts when you put the rear hubguard outside😆

[@ThomasLe_G]

i'm not only the one who've been chocked !!

[@shahrilmusa1468]

its called dropout guard 😆

[@Hassan-Alnajjar]

At 4:34 I didn't know that you have to fix the chain protector out side the frame! I thought it should be inside close to the wheel sprocket!

[@warv7922]

Sickkk! So glad I checked your channel out

[@AlejandroRamirez-ce6lp]

Bro no utilices martillo de metal para meter los rodamientos se te pueden aboyar y no te van a servir más yo recomiendo un martillo de goma aunque sea y si no tienes coloca un trapo en el rodamiento y con algo ve pegando al rodamiento para que amortigüe el golpe saludos desde León gto

[@francissobotka8725]

When you build a bike always clamp it by a seatpost .A cheap seatpost works great as a dummy post for builds .

[@minimoose921]

So many things work better than a hammer. A c clamp with some blocks of wood would be a cheap easy option. Also use more grease. We all start some where nice bike hope you ride it hard

[@skkitels7917]

that looks sooo good bro

[@Bobby_Uterus]

Holy headset spacers are those poverty cranks from 1996?

[@victorverdugo9767]

Este man es una pelota completa como se le va a ocurrir usar un martillo metálico para los rodamientos del centro Aparte de eso es una bicicleta muy hermosa

[@SuperCatz13]

Pensé lo mismo, y luego el hubguard. Facepalm. Aun asi el frame es hermoso.

[@diegoyovaniortiz8604]

Pone las. Guardas por fuera qué rayos quien las pone por fuera

[@mateimunteanu1117]

4:38 what's that called? i saw it multiples times but i don't know the name, i thing it's kinda important

[@Indra_82-t5q]

Nice colour 👍🏽

[@VictorWessels-ni7eh]

LOVE YOUR VIDEOS

[@leviwithabike]

Wow this looks like a sick bike

[@MTBsapuwa6747]

I love this bike...

[@Rizzy_altizzy]

whats going on with the cinema hub guard i have the same one came with my freecoaster pretty sure it goes under the frame unless ur doing some whack spacer shit edit: lol just scrolled down

[@ThomasLe_G]

i can't believe you rode bmx when you put the hubguard like that 😂😂😂😂

[@lewlew5478]

Love the video just 1 question why would you make your bike right hand drive if you grinding on your right

[@lukasstipp_bmx]

I just ended up with a rhd hub, and since my sprocket is guarded, and doesn’t hit the ledge, it’s fine. Also, I don’t want to pay $360 for a new hub when mine is perfectly fine.

[@lewlew5478]

@@lukasstipp_bmx make sense

[@lukasstipp_bmx]

@memba berryare you grinding on the same side as your drivetrain? If so than I recommend hub guards as you will be damaging your chain/driver. If you only intend to grind on the non drive side, there not absolutely necessary but I do still highly recommend them.

[@companionbmx404]

Why are you still running an 8 spline? Good video and nice bike tho

[@lukasstipp_bmx]

I’m running the 8 spline because it’s the only chrome crank I have, and I’m not really thrashing my bike. I do have 48 spline cranks, Èclat tibia/odyssey calibur. They just need paint, and it’s snowing rn

[@lukasstipp_bmx]

I’ll make a vid on painting the cranks tho

[@companionbmx404]

And you're regular but your hubs aren't lsd haha

[@lukasstipp_bmx]

@@companionbmx404 lol yup, i got that shadow hub on Craigslist, and I love it. I don’t mind having to run drive side guards.

[@javiermiranda7240]

🚴‍♂️🏁🏁🔊🔊👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@simoneted2]

Wrong install of rear hub Guard outside of Cog drive

[@shannoncaldwell431]

Fixed

[@apophis3852]

Yeah2 hahaha

[@markgkonan]

may he thinks that hub guard is a Gsports style 😏

[@_Jules_7]

COG DRIVE 😂 ITS CALLED A SPROCKET

[@jandriandresaranamendoza5717]

Cuanto cuesta

[@braydenball4419]

That looks clean

[@christianmores157]

((💀 Complimenti x il mostriciattolo👍))

[@maxivische]

el hub guard tracero no va por dentro de la vaina??

[@juicymesmo]

yes

[@pikkulapsileo4109]

1:44 should you use a rubberhammer instead of a regular one so you dont damage anything

[@Aston-m]

Agreed i was cringing looking at that 😭😭

[@Aston-m]

He used a full on claw hammer 😂

[@_ajeeq]

Love the bike looks... anyway,what song is this?

[@BMMoriginal]

Woher haben sie die Schutzteile die sie unter die Pegs getan haben? ich brauche nämlich welche

[@jonathanmarsh6584]

respect man good build and filming:)

[@ciromontenegro5053]

Cio gkelglrltlt

[@ciromontenegro5053]

😎

[@butterybmx5656]

Did you put that rear hub guard on wrong?

[@lukasstipp_bmx]

No it’s supposed to go on the outside of the dropouts

[@butterybmx5656]

@@lukasstipp_bmx no it’s not lol but if it works for you it’s all good

[@lukasstipp_bmx]

@@butterybmx5656I just tried it on the inside, and it actually works great lol. Thanks for the tip 😂

[@butterybmx5656]

You’re welcome bro 😆😌 haha

[@SezginCinar-j9w]

How do you get a bike like that ? Were from ?

[@lowriderlife8248]

What site should i buy my bike from ??

[@mauriciomancia97]

Nice video but why did you install the hub guard out the drive side?

[@DavidJuhasz1]

Sweet ride! 🔥😎

[@OMG-_-ITS-_-NOBODY]

What street bmx offset fork you use?

[@manjaytv9607]

Baka naman po..subrang ganda sarap sa pakiramdam magkaron ng ganyan

[@KWRDISH_POBG]

Please how much is bike?

[@cedrjk]

Very nice. I love this bike

[@mateimunteanu2702]

4:37 whats the name of that part?

[@aslamthecloud136]

drive side hub guard

[@manampanbalongtahir59]

How i wish that someday i have bike like this🤔

[@welsondavidpl5994]

Muita foda essa bike 😍

[@Dougsterbob]

Half a million views bro hahah it came up as suggested for me

[@lukasstipp_bmx]

Yeah I’m just sittin back and collecting ad revenue now lol 😂

[@fq_voxxy9369]

Imagine being able to afford new parts

[@fully6ixx381]

Imagine

[@jamingeorge3274]

hey what music did you use?

[@titisuarni1680]

how much does a BMX bike cost?

[@migueljoseph5496]

Gorgeous!!!!

[@lukasstipp_bmx]

Sunday street sweeper build coming soon! 😊

[@user-cj2gu4ue5m]

طسططصك على

[@giulianocolangelo2134]

Sick How happy were you to have this bike

[@troyjames5977]

what bottom bracket did you use?

[@frozenropegolf]

argument getting a BSD over an S&M frame? Better quality or just personal preference?

[@lukasstipp_bmx]

Didn’t get an s&m because it’s like $600-$700 and the bsd had the geometry I liked.

[@ali_shaikh_]

Bro price for cycle

[@bunkbmx2059]

Why s driveside guard outside of the dropout

[@yuhenyo6247]

Is that a complete set?

[@sn0fx]

"I always dreamed of a clown bike with no rear end" -- Nobody, probably.

[@sez1065]

Meine Güte wieso haut jeder mit nem Metallhammer auf den Kugellagern rum 😀

[@jazepspocs9017]

What is the top tube and wheel size?

[@metrykpa7255]

Is a bmx good the fashion

[@shaynenichols8343]

I have a hard time believing you actually RIDE this bomb-proof bike like it should be ridden after watching you assemble the hub guard (and for bb- use rubber mallet). Beautiful bike though

[@bruno_LISA011artisticvision]

Those of ya putting in your bottom bracket don’t use a hammer any store that sells tools has an isle that sells nuts Bolts an washers get bolt the size of your spindle get 4 washers the size of your bearings and two nuts it will cost you 4$ and you can re use it forever don’t ruin. Your bearings

[@That_Blue_WJ]

Id never ride a bike built by this dude. Beat the bottom bracket bearings with a hammer?🤔 rear hub guard install wrong. Smashing the cranks thru the bearings. Didnt see him install the spacer between bb bearings. And he didnt tighten the bars in a star pattern. The way he did it can crack the stem

[@cyaldousespinoza6148]

Don't hammer your bb it will damage it!

[@Pursnikity_20022]

How much that run you?

[@jailtonsantana4048]

Irado demais. Top!!!!

[@ゆきな-u4e]

whats the meaning of alvx?

[@ugurkocak3810]

I would hit the bottom bracket with a rubber mallet?

[@martinduran1790]

what's the build?

[@bcombmxwalla]

what the type of the headset I also have the same but it need to be replaced asap #help

[@Hassan-Alnajjar]

As an advice, better to fix the chain sprocket on the place you don't grind, Example: you grind left, the sprocket should be right. & vise versa.

[@pakchandrachannel1598]

Luar biasaaahhh, kapan punya yaaa

[@albeatpyngrope746]

What is the name of this cycle sir

[@hatman3005]

Where can I buy this whole set?

[@liam-vh6rg]

why 3pc cranks & not 2?

[@jamesalmosara3668]

nice build but the hubguard brooooo...

[@nathanjohn3902]

Go for it....slllammmm them bearings

[@ailhamsm5307]

Is this car worth the price?💲💲💲

[@unknow_6228]

Blank Generation XL rim 👌👌👌

[@lukasstipp_bmx]

Lol yeah I know there not great but they were on sale and there double wall.

[@unknow_6228]

@@lukasstipp_bmx why not good there are nice

[@lukasstipp_bmx]

Yeah I like em there just not the most strong or popular rims out there. Im working on painting some hazards lites that I will be putting on

[@kirill1561]

Слушай а какую смазку ты использовал

[@johncarlobolocon5271]

Why did you put the chain hub guard on the drop out of the frame

[@lukasstipp_bmx]

Lol my mistake, I thought it was supposed to go on the outside. Turns out, I just have the wrong hub guards

[@johncarlobolocon5271]

@@lukasstipp_bmx that's fine all people has do mistake

[@johncarlobolocon5271]

How much psi do you ride

[@eduardovizarreta3499]

How much did the bike cost you?

[@lukasstipp_bmx]

The frame was $500 cad, and the rest of the parts I’ve just collected over time

[@GeeCee-rr5hk]

How can you call this a dream build then proceed to use a hammer to install you bottom bracket bearings?

[@ryderloomes284]

What dose it ride like

[@jorgeosorio598]

hola soy nuevo siguidor de chile y esa bisicleta cuanto bale y la vende me gusto

[@giovannicr9732]

Buen trabajo broo sigue asi

[@joasmello5896]

Meu sonho é ter uma bmx!

[@Spuick]

What does a painting like this cost?

[@lukasstipp_bmx]

Painting?

[@Spuick]

@@lukasstipp_bmx What does the painting cost with that painting?

[@aldo70_m_on]

a question, like how much do they cost?

[@lukasstipp_bmx]

the frame was exactly $500 cad after tax and shipping

[@aldo70_m_on]

@@lukasstipp_bmx Thank you

[@gamermaskedrex9353]

what the name of the frame

[@Pursnikity_20022]

Olive metallic?

[@awesomeartsandcrafts1815]

Nice bike!