2021 DIY How to make Photo Pendants for necklaces, key chains and bracelets.

[@janetenchilada3918]

How much would these sell for?

[@allenawatson8126]

Could you plz tell me what kind of photo paper to use

[@dianahill1806]

How do you print the pictures to that size do u use a software what do I need

[@enviousstylezboutique6023]

My photos are fading do u have any idea why it could be doing that i use gloss paper

[@hun517]

Spray with clear sealer,After photo dries from ou printer

[@tonyastrother2846]

I cant find the glass cabochons for the hip hop pendants where did you get your

[@monkeymanndaone]

Where can I order this pendants at?

[@lovable48]

I used the diamond glaze before and for some reason when it dried you could see cracks underneath the glass,do you know why that might of happened

[@kaseykirby2989]

I love your videos. You actually take your time and explain how it needs to be done.

[@KarenCook-xs2kb]

Absolutely beautiful I am just loveing the can you tell me we're did you get your charms and thanks for sharing and God bless you and continue with your blessing

[@GmoneyGcode]

How did you decide how much you should sell your pendants for

[@evanyd18]

Why are my pictures fading after gluing dome on top? It dries beautifully, but then becomes cloudy! Help!

[@LushGlasses]

same problem here

[@lateshamason7815]

I’m having the same problem. Then I tried the glue dots and it fell apart after falling once.

[@tammylashellemusic]

Hi, thanks for sharing your video❤, can I ask what kind of chains do you use for the necklace pendents ,where can I purchase them?

[@gloriagiefer3013]

Can photocopy paper with printing on it be used

[@ReginasCrazyLife]

Sorry but copy paper can not be used.. the minute you add glue it will mess up the picture

[@carlynsdiycrafts]

Yes, but be sure to protect the photo with a clear packing tape. This will not mess up the image.

[@jccurry4864]

Where do you get the blank pendants from?

[@putogenio376]

How much do you sell the pendant with a picture

[@gloriagiefer3013]

Why don't you glue the cabochons on the picture and then glue the picture on the bezel tray

[@PromezQueen]

What size do you make Images for the wing pendant

[@ReginasCrazyLife]

1.0 x 1.0

[@christinadavis8961]

What type of paper are you using to print the photos?

[@gloriagiefer3013]

Which glue would you recommend to use for say printed sheets that I can buy at Hobby lobby or magazine pictures

[@ReginasCrazyLife]

I would just try E600 because other glues will mess up the picture.. I personally haven’t used printed sheets or magazine pictures before plus now I just use sublimation

[@J.3W]

How do you take the cover off the pendant ?

[@bostoncharm1]

When you put the glass cabochon on top of the photo with the diamond glaze and press… do bubbles appear and ruin the image?

[@crpwifey2562]

Lol facebook. Too many social media's. Thanks for the tutorial

[@dominickjusino1238]

Is that glue water proof

[@nazollaadams8746]

Love, Love, Love This!!! Thank You!!!

[@kaseykirby3351]

What did you use to make the picture stick once you put the picture together?

[@ReginasCrazyLife]

I made my picture into a circle in Cricut design space

[@ashleysmith3967]

Is the process the same using the E6000 glue?

[@ReginasCrazyLife]

Yes

[@enviousstylezboutique6023]

If i use epoxy dots do i still put glue over the dot

[@ReginasCrazyLife]

No glue is not needed with the epoxy dots

[@enviousstylezboutique6023]

@@ReginasCrazyLife ok thank u

[@irmapacheco5398]

What size is the image set too? Thank you and God Bless.

[@quinterriajohnson694]

I think she said 1x1

[@ReginasCrazyLife]

It is 1x1

[@propheticallyyours1119]

You can also buy precut images. Mercari has lots of pre cut images for sale they are 1 inch or 25mm. They have sorority and teams and so much more. Makes it a little easier for you.

[@kittymorgan8853]

Your hair is beautiful! 😍🌈✨🌺

[@monicastuckey5436]

Can you post the link for the pendant Circle in angel wings

[@allenawatson8126]

Why is my picture fading I'm going step by step

[@rashaunroberts80]

Hey what site or app do you use to get the pictures an inch

[@ReginasCrazyLife]

I use my Cricut explore 2

[@candicebanks3292]

Thank you so much for making this video. ❤

[@jeweloni]

Thanks for the motivation

[@sierraholly3443]

What kind of printer do you have?

[@ReginasCrazyLife]

I have a cannon photo printer it was $39 at Walmart

[@desireejohnson8877]

Were do I find the chains

[@desireejohnson8877]

I done look everywhere

[@desireejohnson8877]

The e6 glue dont work for me

[@paolamejia9826]

so I tried this yesterday and printed an image on photo paper. I used modge podge the dimensional type and it made the color bleed what do you recommend?

[@michelewalburn4376]

Have you tried decoupage glue? I like it much, much better than modge podge.

[@paolamejia9826]

@@michelewalburn4376 haven't yet will do so. I even tried diamond glaze and it was a little better

[@mskjohnson85]

When I use diamond glaze it seems to leave like a wet look if you turn it in different directions

[@laneshadavis4630]

How did you print the picture

[@brittanygreen1802]

Hey. So you print them with a regular printer and the Cricut printer cuts them ?

[@ReginasCrazyLife]

I print with a regular printer and cut them out by hand but you can use the Cricut

[@jennigutierre9626]

I used the diamond glaze and my pictures bleed out any tips?

[@ReginasCrazyLife]

Let your photo dry overnight..

[@jennigutierre9626]

Thanks!

[@carlynsdiycrafts]

Try using a clear packing tape to cover your photo before you apply the diamond glaze. Then place the glass dome on top. Press it to move the bubbles out. This way your picture will not bleed.

[@jennigutierre9626]

Great thank you I will try that

[@josied4423]

What printer do you use?

[@ReginasCrazyLife]

I have a cannon

[@eaglestarmartin6474]

I bring up the print preferences and it let's me print out 35 1" or 25mm images.

[@Adrianna318]

Where do you get the necklaces you use from? What’s the name of them?

[@ReginasCrazyLife]

I get them off Amazon and the Hip Hop spinner pendant necklace is available on my website sidehustlequeencreations.com

[@Caleighalashay]

u didnt show how to use e6000

[@mihkaylanewkick9783]

Hi, can I use any printer and use photo transfer paper or does it have to be a photo printer or sublimation? (Sublimation Is a bit too pricey for me right now)

[@ReginasCrazyLife]

With the cut and print method you can use any ink jet printer, use photo paper or sticker paper to print your photo on in color

[@ReadyInsights]

Does it change in the water

[@lidiacarrisal5628]

What am I doing wrong. I use the diamond glaze and my pendant start cracking after a couple of days.

[@ReginasCrazyLife]

I never had a pendant crack

[@desireejohnson8877]

How do I get the circle on the picture

[@desireejohnson8877]

Think u so much

[@kayblendzmmj6256]

@Creative Dooley do they have dot around them to cut them? If you don't have a cricut cutter?

[@propheticallyyours1119]

Mercari has lots of wonderful 1 inch pre cut images for sale.

[@crownyourjewels]

Where do we get th necklaces?

[@ReginasCrazyLife]

I get them off Amazon… I will add the link when I get off work.. If your in the craft group it in the comments under the picture

[@ReginasCrazyLife]

Here is the Link amzn.to/3yx9Rlg

[@chloelewis3563]

Hey, I use the diamond glaze as well but some of my necklaces started to get a blue tint once finish hours later. Have you had that problem ?

[@ReginasCrazyLife]

I stop putting the glue on top of the photos and purchased epoxy dots to cover and protect the photos

[@goskateboarding1535]

what's the best way to replace the photo?

[@ReginasCrazyLife]

I boil mine in hot water and pop them back out

[@goskateboarding1535]

@@ReginasCrazyLife thank you

[@BTonTV]

Thank you Queen!

[@dupree416]

HEY MS LADY I ENJOYED YOUR VIDEO AND I JUST WANT TO SAY THANK YOU FOR PROVIDING INFO ABOUT YOUR PRODUCTS, MOST PEOPLE WANT TO CHARGE A FEE FOR A VENDORS LIST WHICH I THINK IS CRAP, I OWN BLING IT ON TEES IN INGLEWOOD CA AND WHEN PEOPLE WANT TO KNOW ABOUT PRODUCTS I LET THEM KNOW WHERE TO GET THEM, THESE PEOPLE ON HERE THAT WANT TO CHARGE OUR OUT OF THEIR MIND, THEY MUST FEEL THREATENED THERE IS MONEY TO BE MADE FOR EVERYONE! I WILL BE PUTTING YOUR LINK EVERYWHERE I CAN

[@creolepie]

Thank you

[@hun517]

which is better "mod podge" or diamond glaze......Will the picture fade after awhile

[@ReginasCrazyLife]

Diamond glaze

[@deloreswilliams8608]

TFS🥰I used the 1 inch whole punch for whenever I do this project.. but sometimes it’s good to use the scissors to..just incase it cuts off some of the pic..🥰

[@amberspencer-armstrong8496]

How do you know what size glass dome to use?

[@ReginasCrazyLife]

I buy the blanks that come with the dome

[@jamyylacollins3639]

I have a question. How do I stop from getting the pictures smeared when I put glue on it?

[@ReginasCrazyLife]

I let my picture dry for a few hours before I use the glue

[@chechecombs]

@@ReginasCrazyLife I've let my pictures dry for 24 hours and the pictures still bleed. Are you using a certain setting on your printer?

[@ReginasCrazyLife]

I using regular printer setting..It could be the paper your printing on..

[@propheticallyyours1119]

I would buy epoxy dots. Same look but they stick on

[@prettylady5247]

It’s a nice tutorial about pendant photo. Good job. Also I would like to know that I don’t have a printer so can I stop by staple for printer, is that good idea? Pls let me know thanks 🤗

[@ReginasCrazyLife]

Yes you can get pictures printed any where.. I just my job printer when I low on ink.. LOL

[@sharondabrock1497]

❤

[@deborahhardeman8802]

I have a question I keep getting lines in my photos that I print on my printer any suggestions on how to stop that from happening? God bless you

[@ReginasCrazyLife]

The only thing I can think of is that must be some dusk or something in your printer. You may want to blow it out.

[@hyperpunk3499]

Change the print quality settings to "high". And, make sure your printer isn't low on ink because the high quality setting uses a lot more ink than the normal and draft settings.

[@sena-oral]

I felt like watching the whole thing from a satellite

[@sarahberry3664]

how do you get pictures or designs to print?

[@ReginasCrazyLife]

Hit make it in cricut design.. when the print and cut screen comes up just hit print and send it to your printer.

[@yaboynook5865]

You should update and re do this video and zoom in on what your doing it's really hard to see what your doing.

[@ReginasCrazyLife]

The video is 2 years old. I do sublimation pictures pendants now

[@againagain394]

North Philly peace Park love

[@carolburnett8670]

Much to far away to see anything!

[@lilmama7844]

What size are the images?

[@whitneyjohnson4325]

What kind of printer do you have?

[@ReginasCrazyLife]

I have the Cannon MG 2500Series

[@kayblendzmmj6256]

I want to do this and don't have a printer..I'ma have to go to Walmart they got printing til I get one for myself