2021 electric bike scooter / e-bike / e-scooter wirelessly programmable brushless motor controller

[@ianhill20101]

Hi Alberto do you have a video plz showing a setup demonstration so from pairing to dispaying and the speedo calbrate etc.

[@Albert-gz3kd]

Hi Ian, I have got a separate video related to the speedometer calibration. I just have sent a link for that video to your personal e-mail address. Please, check. Kind Regards, Albert

[@semajpatrick3996]

hello how to download the app?? please help me

[@Savagetechdude]

Great explanation of the app settings. Can you please tell me where to find the app? I already have a controller with the Bluetooth module, but I can not find the current app. Also, do you know if a cyclone mid drive motor be set up for regenerative braking?

[@Albert-gz3kd]

Hello, Adam. The app and settings are in English language only.

[@carstoniu]

how do i get the app?

[@1TheBadExample3]

i have downloaded the app and can see the bluetooth controller on the screen, however when i try to connect the app closes. is there an update/fix for the app???

[@Albert-gz3kd]

You can contact the supplier / vendor directly, from where you have bought the controller, please.

[@1TheBadExample3]

@@Albert-gz3kd I tried, they don't respond.

[@Albert-gz3kd]

Hello, You can buy it from me (you can contact me through ebay if you want to buy the adapter), but the Bluetooth adapter only works with a programmable controller. The Bluetooth adapter will not work with a plain (non-programmable) controller.

[@kennethonate3408]

I have fiido q1 ebike 72v 3500w motor 80a controller 72v 45ah 100bms battery Can you please help me the setup?

[@Albert-gz3kd]

Hi. Where are you located ?

[@kennethonate3408]

@@Albert-gz3kd Abu Dhabi uae 🇦🇪

[@ADAMKO0]

Hi,Alberto is there a change of language.

[@GUARD14N]

Which wires of the controller is the Bluetooth module connected to? thanks

[@Albert-gz3kd]

They are connected to 5v power wires and also to to data exchange wires (via one of the Bluetooth protocols). But you will not be able to use the Bluetooth adapter with any other controller, it can only be used with this programmable controller.

[@elias8981]

@@Albert-gz3kd how can you know if a controller is programmable ?

[@Albert-gz3kd]

@@elias8981 Programmable controllers usually have a USB wire for PC, or (if it is a Bluetooth controller) - such controllers may have a separate wireless dongle which may or may not come with it. Anyway, usually if a controller is a programmable one - then the seller mentions that in the description.

[@fernandoocampo1619]

if the battery is disconnected does the controller reset to factory settings?

[@Albert-gz3kd]

Hello, Fernando. Regarding your question: no, controller does not reset to factory settings after disconnecting the battery. All settings are saved in the controller memory, no matter if the battery is connected or not.

[@pqx8746]

What happen I forget my password for yyk

[@hederpineros7620]

Good afternoon, you give me a download link for the V4.0 or 6.0 app please

[@Albert-gz3kd]

Hello. I can only send the app after purchase. Also, the app can only be entered when the controller is connected and nearby. You would not be able to enter the app without the controller.

[@BillFromHalifax]

EBS (electronic braking system) has nothing to do with battery regen...Just the level of how much/less you have to squeeze the brake lever.

[@Albert-gz3kd]

No, in the app EBS setting is exactly for adjusting the power of regenerative braking indeed. In the video I explain settings which are related to the programmable controller and not to EBS meaning on other motorized vehicles! That's the difference. Therefore: EBS setting in the brushless programable controller app is exactly for choosing the power level of regenerative braking, that's for sure, as I am dealing with the controller for many years.

[@BillFromHalifax]

Really? Mine has it and it's electronic braking system. Sorta like ABS on a car. Get it? You're not getting battery regent on cheap Chinese ebikes lol

[@Albert-gz3kd]

@@BillFromHalifax As already explained in my previous reply: EBS setting in the app is for regenerative braking of the controller and the motor. That's been tested many times and therefore confirmed. If EBS is set to "OFF" in the app, then when brakes are pressed - there is no regenerative braking, only motor cut off, and the motor slows down longer of course. There is regenerative braking on this controller, because tests with ammeters have shown high current going back into the battery, and charging the battery when braking. Of course for that to happen charge and discharge port on the BMS needs to be the same. And certainly battery and its BMS should be powerful enough handle fast charge. And of course, regenerative braking is only possible on direct drive hub motors. Regenerative braking is impossible on geared hub motors and on mid drive motors with a clutch, no matter which controller is used.

[@BillFromHalifax]

@@Albert-gz3kd You're an idiot. Bye.

[@dasdingo4140]

hallo, where i can buy the bluetooth adapter

[@luisreinierquinones3622]

Hola nesecito la APK podrías darme algún link

[@Albert-gz3kd]

Hola Luis. Puedo enviar el enlace para la aplicación después de comprar el controlador. La aplicación no se puede abrir ni probar sin el controlador de todos modos. Pero antes de cualquier compra, necesito que el comprador me diga primero qué versión de Android o qué versión de iOS tiene en su teléfono. Porque me gustaría asegurarme de que la aplicación funcione con el teléfono del comprador.

[@Denis3dog9t]

а есть обзор детальный и на русском, что какая опция точно делает с контроллером

[@Albert-gz3kd]

Обзора на русском нету, но я могу детально обьяснить все настройки на русском по Вайберу или WhatsApp после приобретения. Также высылаю инструкции после приобретения.