Hi Tomas. Unfortunately this scooter has problems. Sounds and knocks in the suspension are due to play in the shock absorber bushings. The bushings are made of aluminum and wear out quickly. In Russia, they learned how to eliminate this problem. They change the aluminum bushings to bronze ones and also change the axles to more durable ones. This is turning work. Another problem may appear over time. Splits axles and bearings in the upper suspension unit. I did not wait for all these problems to arise and replaced all bushings, axles and bearings of the new scooter. Disassembled and lubricated the steering gear with Teflon grease. No backlash, no knocks, no squeaks. I agree with you that there is very little light from the headlight. I installed an additional two Arctic 25W headlights. I want to replace the shock absorbers with pneumatic ones. By the way, the number of magnets in the P07 motor-wheel is incorrectly specified in the computer settings. I counted 30 of them, but not 28. And the diameter of the wheels is not 10 inches, but 9.6 inches P06. When I corrected this data in the computer, it began to accurately measure the distance and speed. I compared it with gps. I have driven it for 570 km. Good luck, shake your hand.
@Guitarnoob993 жыл бұрын
hey thanks or the info ! I will keep this in mind and will definetly as my repair shop to change the bushings at first then Ill have to take care of the rest as this is not free + winter is comming so im not sure how much longer I will ride it before the first snow :)
@milordas3 жыл бұрын
its all does not matter realy, the most important thing - frame and folding mechanic. rest parts you can change, except those.
@BlastedFreak822 жыл бұрын
I have same scooter with 1300km and no problems(with 90kg rider)... i upgraded handlebar(i hate folding handlebar), front shock(Exa air shock) and steering dumper... Steering dumper made this scooter perfect...
@tazerz92 жыл бұрын
@@BlastedFreak82 what size of exa air shock did you get?
@BlastedFreak822 жыл бұрын
@@tazerz9 Exa KS 291R 125mm 1250lbs
@CD-lw6fl2 жыл бұрын
One thing that would’ve been nice on this Scoot is an adjustable display. While the throttle is in a comfortable position, the display is not visible while riding and looking down. If there was a design to rotate the display to face up, you could actually see what’s happening. Vsett…. See what you can do for your next model. P.S. If it is addressed, might as well address the sun glare issue as well.
@uria702 Жыл бұрын
They made a new lcd and throttle kit you can upgrade and it’s much better than the old one.
@matthewm76663 жыл бұрын
What size battery did you get? Can you switch the right brake lever to the left side and the left brake lever to the right side, so that bump on them will be on the bottom?
@joel31872 жыл бұрын
Its really bad to put hydraulic brakes upside down, dont do it
@happysnowman32232 жыл бұрын
@@joel3187 why is it bad?
@joel31872 жыл бұрын
@@happysnowman3223 If i remember correctly, shimano hydraulic brakes have designed space for small air bubbles at the top. If you flip it upside down, you take that space away, and small bubbles can go where they shouldnt. I think it depends what hydraulic brakes you have, but basic rule is not to use them upside down
@Guitarnoob998 ай бұрын
I got the biggest battery :) ... regarding the brakes im not sure as im not a mechanic :D
@crypttion20613 жыл бұрын
👍 Thank you!
@321backlip3 жыл бұрын
That horn sounds like my microwave. 🤣
@Guitarnoob993 жыл бұрын
lol yeah :D well it crap I would like to change it if that is possible
@321backlip3 жыл бұрын
@@Guitarnoob99 is it attached to the duel motor and boost or can you just replace the horn?
@Digiphex2 жыл бұрын
"I found it to be ugly, I mean look at it" lol. Some things are so obviously ugly all you have to do is point to it.
@ObviouslyPie3 жыл бұрын
Get some WD-40 sillicon spray and use it on the suspension and gently wipe it off - it will eliminate that issue. Had same issue with mine. :) Don't use standard WD-40 though as that will destroy it over time.
@wombat52523 жыл бұрын
How is your vsett doing so far?? I'm planning on buying this specific one. Worth the money? Build quality worth it?
@ObviouslyPie3 жыл бұрын
@@wombat5252 still going strong, no issues that I've noticed. Build quality hasn't changed and is still sturdy.
@wombat52523 жыл бұрын
@@ObviouslyPie Thanks for the reply. I can't believe I'm going to spend so much on a scooter, so I'm hesitant. Haha. I'm going for the mid range 25 Amp hour battery...which one do you use and what company did you go through? I want a reputable company thatll replace my parts if it's not my fault.
@TheRealElectricOutdoors2 жыл бұрын
@@wombat5252 alienrides
@wombat52522 жыл бұрын
@@TheRealElectricOutdoors Why Alien Rides? Sooo many people that have bought the Vsett 10+ were from Rev Rides. Did you buy through alien rides?!
@diegorox1233 жыл бұрын
How tall are you ? I want to check if the height of the handlebars are ok for me
@Guitarnoob993 жыл бұрын
im 180 cm :)
@diegorox1233 жыл бұрын
Thanks bro
@CD-lw6fl2 жыл бұрын
I know exactly what you mean about the controls and the horn 😂 . Fortunately there’s a solution on Amazon for the horn. I also purchased a headlight from Olight, 1500 lumens which makes a HUGE difference. Just need to figure out how to improve the position on the controls.
@raymonddennis75118 ай бұрын
So think of that so-called bulb headlight as a magnifying glass so basically it’s kind of like a projector light on a regular vehicle it projects a clearer light and isn’t all fuzzy and saturated I personally love the headlight on this scooter. Yes, it is low and it doesn’t get that much ground light but at the same time it’s bright enough for you to see what’s in front of you even what the light isn’t shining on.
@Guitarnoob998 ай бұрын
Yes, but if you are driving at 45km/h or faster it suck as you only see 2-3 meters in front of you ar if yo spot a hole in the roar you might not be bale to avoid it, hit it and fall down
@TebatusYT3 жыл бұрын
would you still reccomend inokim oxo in late 2021?
@Guitarnoob993 жыл бұрын
deff not and there are a few reason for it. First its weaker so less power, the battery is smaller so less range, the build quality could be better for ex the plastic tail in the rear where you lean with your foot will crack or brake eventually, if you will ride it quite often you WILL get that wiggle in the steering columb as the lock mechanism is shit in comparisson with Vsett 10+ and finally the price it costs the same or more than Vsett 10+ and I just cant justify the price for a worse product. If you could get it for lets say 1200-1500 $ sure, but not for 2300-2400 $
@Sedge863 жыл бұрын
So did I miss it what range did you get on single motor?
@Guitarnoob993 жыл бұрын
I made a seperate video about it :) but its almost the same as with dual motors :)
@Sedge863 жыл бұрын
@@Guitarnoob99 cheers I'll have a look. I'm a similar weight curious to know what range I'd get just commuting at around 25mph
@lukeo54542 жыл бұрын
great review!
@JulianRides2 жыл бұрын
be nice if it had a LED lighting on the side of the deck like the blade 10 or maybe even on the stem like a dualtron scooter. one thing I never understood how the front of the scooter don't brake as much then on the rear. There both efficient but like one brakes more then the other which I never understood that.
@Guitarnoob992 жыл бұрын
:DDD hell no its the opposide with me I HATE those led lights :D it serves no purpose apart from giving yo self and others sezures :D
@mikksaia8373 Жыл бұрын
hell nope. a lot of guys are not even considering some of the scooters even tough they have amazin specs, but then they are covered with unicorn vomit rainbow led lights that look dumb as hell and are embarassing / attention seeking / police magnets
@mikksaia8373 Жыл бұрын
Its so you wont fly over the handlebars so easily
@Robert1273 жыл бұрын
the main bolt in the neck and collar and the cup inside of the neck need to get grease its a easy fix look it up on here you will need a second hand for this kind of job heavy duty grease will take out the creaking and the breaks on your scooter just needs to be tuned in got to a bike shop they will do it for you if you dont know how nice vid buddy
@jkmax24693 жыл бұрын
And otherwise, look dude on KZbin, regarding troubleshooting, squeaking, creaking, everything on KZbin is explained with instructions.
@battletoad012 жыл бұрын
I have the same issue with the mantis. Those brakes look like rebranded zoom. Same as kaabo uses. I have both zoom labed and kaabo labled so i bet those are zoom. Anyway i have the throttle almost flat and breaks pointed down. Way more comfortable. The finger throttle is not a good design. I thought about modding it by adding a thumb thottle or if i can afford one eventually, the Rion thrust throttle.
@Guitarnoob992 жыл бұрын
:D good to know its not just me, but someone ellse who thinks the same
@milordas3 жыл бұрын
waiting for info for horn replacement option
@Guitarnoob993 жыл бұрын
I have no answer :) ... I will have to ask the shop if there is anything they can do... if i learn something ill let you know :)
@milordas2 жыл бұрын
Pirkau 12v motociklo klaksona 105dB, papildomus laidus, kurie eina prie jungiklio (3 pin) kad nereiktu ju karpyti. Ideja tokia - atjungi klaksona, uztrumpini ta jungti ir pakabini isorini klaksona panaudodamas tuos pacius laidus kurie jie eina prie jungiklio. papildomus laidus sulituoji taip kad jie eitu i klaksona ir ishsaugotu mygtuko apsvietima. Kai isbandysiu prarasysiu
@milordas2 жыл бұрын
Ishbandyta, veikia. Tuos papildomus laidus sujungti - raudona su raudonu, balta su baltu, tarp dvieju juodu prikabinti klaksona, o ten kur senas klaksonas buvo po deka, - uztrumpinti laidu
@k9teamzagrebskolazapse149 Жыл бұрын
Tighten suspension
@mikeysironrage81033 жыл бұрын
U need a steering damper and u need to change the suspension its to soft bro your gonna lose control after 40mph trust me its way to soft and it will clear up the clunking and you need to grease the stem thats the noise your hearing from the stem u have to take the the stem off and grease it bro i have the same scooter even dualtrons do that out of the box
@wombat52523 жыл бұрын
How is it? You said you have the Vsett 10+? I'm going to be buying it soon. Worth the money? Is it still holding up for you? Good build quality?
@321backlip3 жыл бұрын
May be worth investing in some 720 handlebars for more real estate.
@milordas3 жыл бұрын
measure first your doors :) i cant even with stock handlebars put scooter to elevator without folding them
@sohaibmahagri50373 жыл бұрын
@@milordas rotate the stem left or right. But still you need the folding to lock rbe scooter sometimes I usually fold the right side of the handle bar to be able to lock it at work with a u lock
@Skyy-j1d2 жыл бұрын
It's such a great Scooter,I love it, but can't get on DDM cause it's fvcking scaring,I only tried it ones Lolz,and you're right about the horn, it's so disgusting for such a great Scooter.
@Guitarnoob992 жыл бұрын
haha :D yeah I know what you mean xD well you know on default its on 3/5 agresivness level, but it you dile it down to 1/5 its actually very nice, still strong, but it does not want to rip your arms off :D
@Skyy-j1d2 жыл бұрын
@@Guitarnoob99 😂😂😂😂, yeah but if only it's a possibility for seat on it,I believe that could've be very nice,with that it's not much scaring.
@k9teamzagrebskolazapse149 Жыл бұрын
Try carbon peist or both clasic MTB wheal and don't cut it buy 800cm and then cut it at 780cm than go to 750 is my sweat spot all my bikes and scuters hawe 750 steering wheel. Its to mee sweat spot.
@k9teamzagrebskolazapse149 Жыл бұрын
Ita all ok but caring bastard is hewy but it's flys without eny buying additional parts . I nail him 66 an 75kmh but that was on mobile I didn't put on garmin. But this scooter us for people who liwe 15,20km from town cos I'm in center and I haw too wait too properly try the spead, and its too big for EU bicikle lains i had it 2 weaks and its beast but for center I rather use my Vsett8 his younger brother . But next gen off 10+ is mine
@Mike_Malloy3 жыл бұрын
Thanks for the honest review. I don't like the controller 1 finger throttle and of course you can't see it in sunlight. That's just ridiculous for the price. The throttle should be thumb driven so you don't mistake throttle with breaking. For the creakiness of the stem, here's a video on how to fix that. kzbin.info/www/bejne/oIrEh3mbr5aAmNU
@вечная_мерзлота2 жыл бұрын
while it looks good, like everything else its Chinese junk. you will be replacing many parts on it.
@milordas2 жыл бұрын
yes you can change many parts and will, but frame is more than ok and frame you cant change
@denieldreling29893 жыл бұрын
🤣🤣🤣🤣🤣🤣mooooc trapný video
@DanielCValot Жыл бұрын
I hate that trigger throttle! I raced moto cross for many years and the throttle type is best but the thumb is not bad either That will stop me from buying this scooter, otherwise I really like it