2022 BMW S1000R / RR | FuturisMoto Endurance Race Tail Light

[@jackmac66]

Bill always enjoy your installation videos. Well explained and great quality. Thanks again

[@CaliMotoTV]

Means a lot! Thanks for watching 🙏

[@LambChopRides]

Oh thats nice! Think I will get one of those, best tail tidy solution I have seen 👍

[@CaliMotoTV]

👌👌👌 Nice!

[@kaimini]

Great content in all your videos! Thanks for that! I ordered a new s1000r and it delivers in October. My question.. where can I get those clear grip pads for the tank? Greetings 😊

[@CaliMotoTV]

They're stomp grips, ordered on their website. It's the s1000rr grips.

[@flyg13]

I have wanted this tail light kit for my 2022 S1000R forever now! I emailed them and I’m on the dang wait list. I will literally buy yours off your bike for an extra $200 including the $315 it cost for one. It’s the only tail light I actually like. I’m dead serious about my offer.

[@edsonpacifico]

congratulations for the video plus a written one where I can buy it grateful...

[@oneonlyxram]

So much room for activities...look at the cavity to put the cables back. Yea the integrated taillights isn't what I go for, but that is a clean look. Great tutorial man.

[@CaliMotoTV]

👌 👌 👌 Thanks!

[@josey1972]

It is a family run company and so customer service, inventory and promptness of delivery are unfortunately inconsistent. I did run into an issue where the led light failed and they did warranty it by sending a new board, at their cost, and this did fix the issue. Of course it did take a month to get it sent out but of course this was expected! Looks great and I wish you had completed the video prior to my install.

[@CaliMotoTV]

Thanks for sharing. Sucks it took a little, but great they stood behind their product.

[@Thelnferno]

Thank you - this was a great video tutorial!

[@CaliMotoTV]

Thanks for watching!

[@redsox418]

I think I prefer the FuturisMoto tail light compared to the NRC/TST one. It's very clean and sleek and I think just looks best compared to the other two. I will say the TST one fitting in those little pockets is nice as there is quite a bit of separation between the two lights (thus making it easier for the car behind you to clearly tell if you're turning left or right).

[@CaliMotoTV]

Good point!

[@nmbueller1313]

It’s a shame the tail sections are different enough that the TST kit won’t fit the R. 😔

[@Victic005]

I would not buy the bike till I have the tail tidy in my hands. A wise man will learn his lesson from others.

[@CaliMotoTV]

😂😂😂

[@Whatever_Rad]

The Tidy Tail sounds like the conquests one of King Arthur’s lesser known knights 🤣🤣🤣🤣 fun video to watch as always 👍🏽👍🏽👍🏽

[@CaliMotoTV]

🤣🤣🤣 Thanks for watching 🙏

[@greyanaroth]

Even i thought the indicator situation was a little dodgy but it sure is neat! What's the exhaust sitch?

[@CaliMotoTV]

Huh?

[@greyanaroth]

@@CaliMotoTV sorry. Situation. I was trying to get with the cool kids. Clearly it backfired. As in, when are the SCs going away and what's coming in place?

[@gearhead996954]

I plan on taking my '22 S1000R to the track as well. Is there a way that you know of to unplug or de-activate the headlight for track use that you know of?

[@CaliMotoTV]

Nope

[@steve7572]

Doesnt CA DOT require a 9 inch separation between the turn signals?

[@poonchild]

Bore off.

[@parall4x]

are there any other options besides NRC/FM/Trex for S1000R tail lights?

[@cmd_76]

I too have been waiting a long long time for my V4S tail tidy...still nothing on their website as far as when inventory will be available

[@cmd_76]

@Draknight I am waiting patiently & will do as this is the best one out there

[@cmd_76]

@Draknight I will see if I can make one & post it...but there are others who have done the mods to their V4

[@Rugers1r]

I installed this on my 2022 s1000r and i got license plate light malfunction on my dash ?

[@jameshow7757]

Does these mods void the BMW warranty?

[@CaliMotoTV]

Anything you do to your bike can and will be used against you. But no changing the tail light won't void iE your engine warranty.

[@dustonhodgkins8200]

What can are you planning on using to replace the SC Project?

[@CaliMotoTV]

Arrow GP2 is on order.

[@warnova2010]

Where can I buy this kit? 🙂

[@CaliMotoTV]

Try futurismoto maybe?

[@warnova2010]

@@CaliMotoTV it doesn’t matter s1000r or s1000rr it will fit anyway? And I love your channel😅

[@CaliMotoTV]

@@warnova2010 it's the same part for either

[@فراتفروتي]

😍😍😍

[@CaliMotoTV]

👌

[@GLOBUS_25RU]

👍👍👍

[@davidgriego8722]

With today’s modern electronics why not include an option in let’s say “track mode” that shuts off the lights?

[@CaliMotoTV]

We wonder same exact thing lol

[@AMGPilot]

It clearly states in the installation instructions that this Race Tail Light is for "OFF ROAD USE ONLY". IT IS NOT DOT APPROVED FOR ROAD USE.

[@CaliMotoTV]

👍

[@danielleinz7000]

So then what s the sense of the plate holder if u can use it only on race tracks?

[@bill_4359]

@@danielleinz7000 There is no inspection of motorcycles in California. Valid driver license, Insurance card, valid registration card and sticker on the plate.

[@dsimon9s29]

Thank you for posting. A good instructional video. A couple of comments. First, I don't know why you say they are DOT approved? Many of the after market front and rear light set ups I have seen are NOT DOT approved (for one thing, the reason we get such ugly over the wheel tail lights in the stock form is in order to meet DOT regulations). It is kind of a buy at your own risk type of thing. Which is why I have been hesitant to buy them. I have been interested in their products for a while, but like you noticed, their customer service is lacking. I can't help but think their operation is run from the garage and it is kind of a hobby/supplemental income thing. With always being out of stock, I can't imagine they are making a living out of this. At least for now.

[@Ken_Myette]

I'm sure that plate placement wouldn't pass inspection

[@CaliMotoTV]

Not what we were referencing, at all. We didn't understand that DOT approved the oem lights as they sit. When you push on the brakes and have the flashers on, the flashers are not visible.

[@dsimon9s29]

@@CaliMotoTV Ah, got it.

[@im___ice4638]

This is wrong. On the single R you have to take both seats off

[@khalidi001]

That set up does not look right! The lights are tiny and so close to each other. Other motorists will never be able to tell easily which direction you are going.