2022 BMW S1000RR | Rizoma Stealth Mirror Install

[@TwoDogs_music]

I very much appreciate how thorough you are in your installs and talk about it in a way that makes it look simple. Much appreciated 🤙

[@JimmY08_r]

In Germany we say ,,Das ist das geilste was ich je gesehen habe‘‘…They look soooo good

[@dsimon9s29]

Thanks for posting. Love those mirrors, but don't want to give up the blinkers. Shame they did not incorporate blinkers into their mirrors. Looking forward to see how you address the blinkers. :)

[@CaliMotoTV]

Yea it'd have been nice to have those integrated. We'll figure it out.

[@tiger2q]

I know this is from two years ago but u can get aftermarket blinkers installed for the bike

[@amirkassiri-x4g]

Hey Great video… thanks Any idea where I can buy the resistors for 2023-2024 S1000rr?

[@MrDeepseadweller]

I installed these on my S1000RR recently For the indicators, I went with Rizoma Leggera. They attach to a bracket underneath the Stealth mirrors and stick out from underneath the fairings. They look absolutely amazing and I get comments from everyone. Not cheap, but worth it.

[@CaliMotoTV]

Can you send us a link to [e-mail] we don't seem to be able to find those. Thanks.

[@MrDeepseadweller]

@@CaliMotoTV Just sent the email

[@EmoryJacob]

is there any way to get those resistors solo? great video!

[@akshitsaini8790]

What are those resistors called I am looking to buy those as well for my motorcycle

[@kennethengstrom9261]

Looking good mirrors, Rizoma have light mounting parts for these mirrors. But you may already know that. Anyway here they are, Light unit FR070BM, holder FR440B, mount kit FR442B, wire kit EE078B. Good Luck Bill👍

[@CaliMotoTV]

👍

[@motoken]

I always wondered about the blinkers, I initially wanted this...... but the turn signals

[@CaliMotoTV]

Yea we definitely need to figure out an alternative.

[@motoken]

@@CaliMotoTV the older s1000rrs have blinker mods on the bmw emblems on the side fairings. Maybe they still have that.

[@mondayrainbow4322]

Have Manny send over a pair of Roundel lights for a temporary signal light solution. Not to many good how to’s on installing them on the web

[@CaliMotoTV]

Reached out to Manny! Thanks for the idea.

[@markettradinggenius]

hey bro, where do you buy those little resistors to put into those front lighting socket in order to avoid any kind of error on your dash screen?

[@CaliMotoTV]

They're part of the bmw block off kit we got.

[@GTZZTG]

@@CaliMotoTV can you share the brand and maybe the seller of the block off kit? Been looking for them. Thanks a lot.

[@CaliMotoTV]

@@GTZZTG www.revzilla.com/motorcycle/bmw-m-race-cover-kit-s1000rr-2020?sku_id=1745939

[@GTZZTG]

@@CaliMotoTV thanks a lot 😁

[@Ashokgadeking]

They are not resistors I think. They are just dust blockers. Can you confirm cali Moto?

[@Lifeguard_Sam]

You said “no blinkers”, does unplugging the mirror blinkers disable the headlights blinking when you activate the turn signal switch?

[@elvinmartinezjr.3669]

I just purchased these Rizoma mirrors. Can you recommend where I can get these type of Resistors to avoid the error messages? Thanks for the video, very informative.

[@CaliMotoTV]

There's no resistors. There's an option in the back menu to simply turn them off.

[@m.robinson2558]

Looking good. Great content as always. Any upcoming plans on an exhaust /remap after break-in?

[@CaliMotoTV]

Absolutely 😁 stay tuned!

[@samuelkaila2435]

Nice video. Can u please make a review on stealth mirrors about visibility and all ? I’m planning to buy the same mirrors. Thanks

[@CaliMotoTV]

It's OK visibility. Worse than OEM.

[@GTZZTG]

Thanks for the video, ordered the same mirrors and waiting for shipment. I just ordered the bst rapid tek from motowheels, can I use the original rotors and other parts from OEM wheels on the bst? It's 3 months of wait time 😂😂

[@CaliMotoTV]

You'll need an aftermarket sprocket for sure. Also, not sure which wheels you currently have, but you may need different rotors as there's different rotors on the cast vs forged wheels. Try brooks performance, they're a bigger dealer for the bst wheels and it looks like they may have em in stock. We used the coupon code MooreMafia5 before for 5% off, $200 on the wheels 😅

[@GTZZTG]

@@CaliMotoTV thanks a lot. I have the forged wheels now. Been getting different information regarding the parts. I will check with brooks.

[@trueno448]

How do you reset or remove the Message code for the turn signal?

[@PilotlifePOV]

Hey great video, where can I get those resistors?

[@MrJiujitsublackbelt]

Just a question I still get the errors even with the dummies in do you have any idea why? I tried swapping them too just in case they’re side sensitive but I still get the error thanks in advance

[@CaliMotoTV]

You can turn the errors off in the back menu.

[@MrJiujitsublackbelt]

@@CaliMotoTV oh really? Just by pressing down on the menu button? And navigating it?

[@okrum]

Looks great mate. Why aren't mirrors allowed on track ?

[@CaliMotoTV]

You're not supposed to look back. Also in the event of a crash there's no glass on track.

[@jenarddennis2737]

Do the fit the R and where can I get them?

[@CaliMotoTV]

No there's no mounting points on the bike since there's no fairing.

[@bestgeneration5468]

Thank you for the review but I thought you should mention that the visibility on those Mirrors are very bad compared to the original ones I had used them on my s1000RR and I remove them immediately after 2 hours on the street You only see your elbows and a little bit of the street too bad they look very nice

[@CaliMotoTV]

It's not the best but it's not much worse than any of the bar end mirrors.

[@leonardoparreira1131]

3:36 what name and model of these two pieces?

[@ducatifamfl5306]

Bike is looking sweet, love those Rizoma mirror/Winglets. Debating what my second bike will be for 2022, my current bike is a 2022 SF V4S Dark Stealth and now I want either a Panagali v2, BMW S1000rr or R1. 🤔 Even considering a Ducati Hypermotard 😉

[@abyalex235]

Go for the new Panigale V4S.

[@CaliMotoTV]

Haha you're all over the place with the choices. All of which are pretty neat.

[@rclarke2456]

All that money and they didn't put lights in it, I have the same bike I just got mine last month I'm watching to see all the upgrades you put on yours so I can get some ideas

[@CaliMotoTV]

Cool! Stay tuned!

[@jeffh278]

Cool decal. Where can we buy a shirt?

[@CaliMotoTV]

www.calimototvmerch.com/

[@abyalex235]

So what about the front turn signals?

[@CaliMotoTV]

We'll probably run LEDs down the sides.

[@leogeorge9579]

Does it come with indicators.

[@motosenpaimy]

isn't the error still come out even with the plug in? the only way for me to remove it is to turn on track mode which will turn off the connectivity.

[@CaliMotoTV]

No.

[@BlackSunEMT]

Where did you get those resistors

[@CaliMotoTV]

They're not resistors. They're just dummy plugs. They came with the tail.

[@eyalvita9834]

Good morning friend I love all your video I also have 2022 BMW s1000rr Please tell me what your opinion on HeliBars riser Thank you eyal

[@CaliMotoTV]

We don't have one because we don't put this kind of stuff on our motorcycles. It's a sport bike, not a touring bike.

[@darenoreilly3852]

Can you see through them good

[@CaliMotoTV]

Ehm, it's OK. Not as good as stock.

[@mr2scroll538]

Nice

[@CaliMotoTV]

🎉

[@romualdlarney6053]

Nice choice bro but they do the same on Aliexpress for less money N same quality... with love from Paris...

[@CaliMotoTV]

Doubtful.

[@ravenmoto5948]

And they have blinkers built in and swivel.

[@grandtaino]

Not sure why you call a pain to accomplish something so simple but ok... normally takes me about 5 minutes to do it for the track days. Other thing is if you compare the price of the Rizoma vs the oem 500ea they are not rhat expensive lol. Thanks for the video but for people without experience probably would be mislead by the intro thinking the process was super hard.

[@CaliMotoTV]

It's not misleading. On the new s1000rr you have to take windshield off to get to the plugs for the indicators. That alone is a pain in the rear end. All these bolts aren't really designed to be constantly taken on and off, we do 1-3 track days a month . We stand by our statement.

[@grandtaino]

@@CaliMotoTV it's a matter of opinion but no matter how you look at it a 5 minute operation is not hard work in my book. Respect your opinion but I stand by my statement also.

[@arnoldtm31]

On the track, they will act against you. If you're looking for downforce, you need a curved surface on the bottom, and flat on top. These will simply induce drag and wind noise, both surfaces being flat.

[@CaliMotoTV]

😂 😂 😂 😂 😂 😂 😂

[@bjarnvik]

Eeeeeeeeh, nobody having a problem with ”finding a indicator solution later”?!

[@CaliMotoTV]

Tbh we spend more time on track than road, so no.