2022 Honda Navi Carburetor Jet Kit Install! **MNNTHBX**

[@TTorres1183]

Much needed performance mod for the NAVI!

[@jeremybuterbaugh8023]

Just re-jetted mine last night but now it feels like it wants to die at idle when I stop at a light. Had to keep on the throttle to keep it going. Only a short ride and went to bed. Going to check it out here after breakfast...

[@TTorres1183]

Turn the fuel up

[@jeremybuterbaugh8023]

@@TTorres1183 rode around for 20 min this morning. Backfired 4 times and stalled once... Lol how do I turn the fuel up? Total noob here

[@TTorres1183]

There is a screw on the carb that’s a Phillips. You can adjust from there

[@richgwozdz8580]

😂 those are the stock jet sizes bro

[@thatguyjd281]

Curious on difference of performance and fuel economy

[@123edwardzpad]

I watched this video again. Not only do you make it look easy,. It is easy. I am feeling inspired.Thanks again.

[@TTorres1183]

Thanks for watching!

[@Chance404]

Just bought a Navi yesterday. Can't wait to start modding it!

[@scottk9591]

The assembly on the top of the carburetor is your throttle assembly. It has the throttle slide (black clyinder), the return spring, and a needle which controls the amount of fuel delivered in the mid range. The fuel line is actually the small black tube that connects to the bottom of the carburetor that you removed at 1:48.

[@TTorres1183]

Thank you for the info! I need some tweaking with the carb

[@scottk9591]

@@TTorres1183 No problem! If you need to adjust the carb, this guy explains anything and everything you need to know about motorcycle carbs and tuning them. kzbin.info/www/bejne/qHTSZ5eAdt2cbJY&ab_channel=RollingWrench

[@paulargenzio4607]

How do you know what size to use?

[@RemedyTalon]

Imagine trying to make a Honda Navi faster.. Yea, I'd do it to, modify everything.

[@Sweethustles]

Does the jet kit void the warranty?

[@mrrandom6250]

Can you do a video on turning on the fuel screw and where it's located... that would help alot.

[@23killquick]

He called a throttle cable a fuel line... I wouldn't trust this dude with even taking a jet out let alone something that could blow a motor

[@jameswhite9416]

can you put a the 95 jet in and it run ok

[@TTorres1183]

Jets are all going to depend on your location in the world...

[@beausbargarage6213]

Nice work man I ordered the intake, jets, a variator off of scooter shop Gonna be gnarly! Sweet video

[@TTorres1183]

Did you use my coupon code?

[@beausbargarage6213]

@@TTorres1183 wasn’t aware of any Ill email them it What is it Scooter swap shop is who I bought from

[@tylerstander1886]

The thing with the spring is a needle and seat

[@yamilbautista5721]

The black tube on the bottom of the carburetor…what does it connect to?

[@nicholasrodriguez6976]

So I just installed the same jets in my Navi. The 38 and the 90 and for some reason the bike won’t start. Any advice?

[@hotaruasmaria7504]

guess I'll add another part to the list. thanks much

[@jeffery8512]

How much faster dose this go now

[@justinmcleod4293]

Anyone else have a problem starting their Navi? I have a Yoshimura exhaust, 38/90 jet, and intake. I can only get it to start if I give it gas additionally, it will turn off if I come to a complete stop. The bike is brand new and I have no experience with bikes so any input would be great

[@shadmanahmed8864]

Were you able to figure out what the issue was?

[@justinmcleod4293]

I adjusted the idle screw and I start the bike with no choke​@@shadmanahmed8864

[@justinmcleod4293]

I had to adjust the idle screw. Also, I start the bike without the choke

[@mrrandom6250]

How long would you say it took to do this whole process

[@robert420ism]

So if I removed the stock exhaust then I should place the 90 jet correct? Thanks

[@TTorres1183]

Correct

[@yamilbautista5721]

Does the breather tube connect to anything else?

[@glenersly7770]

For the life of me I can’t figure out how you kept the rear fender -what attaches it in the front?

[@TTorres1183]

Huh ?

[@rogermclellan4678]

I removed the rear fender when I took off my intake and switched my exhaust, I am doing your carb mod now , thanks . I was worried about debris from the resr tire hitting my open intake , so I modified my rear fender by turning it around and adding 2 custom made brackets to hold it there. The back of the oem fender tucks in forward to seal the gap above the tire and the rest can be cut with a pair of tinsnips to customize it. Bolted 2 custom brackets using existing hardware to attach. Just had to make fro. Heavy sheet metal two offset brackets which I cut with tinsnips as well and valla.

[@123edwardzpad]

Nice video. Thank you.

[@marraben]

Wondering if this carb would work on my ct110

[@matthewhensley5165]

So could i get better fuel economy with different jets? Idk why i cant find any information on getting more mpg the geom gets 125 and this should get 100 but it gets more like 75 what do you do to get the 100 mpg promised

[@SonGoku-mj5pq]

Im almost 6ft and 250lbs, is the navi stock ok for someone like me or should i mod immediately if i decide to get one?

[@TTorres1183]

Yeah I think you would be fine

[@calebmurray6980]

I am 6’2, 265lbs and it will do 50mph with me on it with no issue. Naturally i lose speed cause the thing makes 7 horses but these performance mods will help pep it up.

[@mattpittman8307]

Just got my Navi. I’m NOT a carb guy, but always looking for good mods and not afraid to try anything with a good KZbin vid like this. How bad can a novice screw up a good carb with this rejetting? What other adjustments can get me in trouble on this carb? I hear the a/f adjustment is sealed off and can’t be messed with? This mod can’t burn up the piston can it?

[@TTorres1183]

This is a perfect simple mod that anyone can do!

[@revdrshad]

Most Air/Fuel screws are covered from the factory. Basically Honda wants them tuned down as much as possible for emissions controls. There's videos on how to remove the screw covers... Basically start with a tiny drill bit, and move up in size, working gently until you can either twist the cover/cap away, or you can get to the screw for adjustments. As long as the bike revs up, and falls down smoothly, you shouldn't need to adjust. Be super careful. All the best, and good luck.

[@diptenkrom]

adding fuel enriches the circuit. lean can burn up a piston, rich cant.

[@drfrog777]

What speeds did you reach? Or are you going to do a video on that

[@AK_Jake]

I’m curious too

[@TTorres1183]

I’ll do a video on that

[@issachar10]

Yes please

[@muddybuddy9786]

Hey man i just bought a navi and have the man in the box intake coming and a jet kit from them did u have to tune anythying on it?

[@TTorres1183]

No adjustments

[@codysmith6274]

Okay I did everything now it won’t turn over plz help

[@codysmith6274]

Nvm she’s running baby

[@NvteLaurent]

Mine tries to turn on but won’t turn over. What did you do to fix it?

[@tonymontana09210]

thats the throttle slide and needle.

[@albertogarcia305]

Do you have any more thoughts on the light? Have you taken it out at night yet?

[@TTorres1183]

I have not… but I know the bike needs an led light.

[@Image-X]

Pretty cool that you actually have some pig matting. 👍

[@TTorres1183]

Of course!

[@Eric2000ad]

I can’t wait to get me one bro fat guy on a little bike 🚴😂😂

[@TTorres1183]

😂