2022 John Deere Z530M Zero Turn Mower Review & Walkaround

Learn all about the John Deere Z530M ZTrak Zero Turn Mower: Features, Functions, Key Service Points & Demo!
► Buy John Deere Parts - go.west-equip.com/youtube/sho...
► Need help finding John Deere parts? We would love to help! Call [phone]
John Deere 530M Attachments:
► John Deere Rear Bumper - go.west-equip.com/KZbin/sho...
► John Deere Trash Receptacle Kit - go.west-equip.com/KZbin/sho...
► John Deere Front Jack Kit - go.west-equip.com/KZbin/sho...
► John Deere Toolbox Kit - go.west-equip.com/KZbin/sho...
► John Deere String Trimmer Kit - go.west-equip.com/KZbin/sho...
► John Deere Floor Mat Kit - go.west-equip.com/KZbin/sho...
► John Deere Yard Tool Bracket Kit - go.west-equip.com/KZbin/sho...
► John Deere LED Light Kit - go.west-equip.com/KZbin/sho...
► John Deere Footrest Kit - go.west-equip.com/KZbin/sho...
► John Deere Hitch Kit - go.west-equip.com/KZbin/sho...
► John Deere Blower for 48" Deck - go.west-equip.com/KZbin/sho...
► John Deere Blower for 54" Deck - go.west-equip.com/KZbin/sho...
► John Deere Power Flow Chute Kit - go.west-equip.com/KZbin/sho...
► John Deere Material Collection System - go.west-equip.com/KZbin/sho...
Similar Videos:
► 2022 John Deere Z735M Zero Turn Mower Review & Walkaround - • 2022 John Deere Z735M ...
► Should you buy a John Deere Z500 Series or Z700 Series Zero Turn Mower? - • Should you buy a John ...
► Brand New to 2021 John Deere Z365R ZTrak Zero Turn Mower Review and Walkaround - • *Brand New* to 2021 Jo...
► 2021 John Deere Z720E Zero Turn Mower Review and Walkaround - • 2021 John Deere Z720E ...
0:00 - Intro
0:18 - Explaining Model Number
1:44 - About the Mower Seat
3:33 - Operators Station
10:58 - Roll Over Protection System
12:43 - Fuel Opening & Storage
13:58 - The Engine & Service Points
18:41 - Mower Deck & Frame
26:03 - About the Tires
26:39 - Dimensions, Specs, & Warranty
28:58 - Demo of Mower
30:38 - Outro
#JohnDeere #Deere #ZeroTurnMower

[@karlschwab6437]

This video with your description is fantastic! Just what I needed as I await the delivery of the 54" model in a few days. Thanks again.

[@thturner7719]

I just bought a Z530M and getting it this week. Thanks for the great video. As a first time zero turn operator it is very helpful.

[@vincentvanpaepeghem4844]

Great video Brent! Love the Z lawn mowers! John Deere makes the best! Once again lots of great information! You do a great job putting the information out there! Thanks for sharing! Have a great and awesome day!

[@WesternEquipment]

Thanks Vincent and thanks for watching!

[@M70ACARRY]

How can you say that. Their quality has seriously deteriorated. Their zero turns are junk.

[@tblake1114]

Thank you for that. I just bought a M530/ 54 inch. Being delivered this week actually. 🎉

[@fredmore8788]

Thank you for the review...I just bought a Z530R and had no idea how to operate my new toy...your review has made me aware of the things I had no idea my tractor had.

[@WesternEquipment]

I am glad I could help and thanks for watching!

[@CindyCooley-ps6lg]

Thank you so much for doing this video. It helped me immensely.

[@Rc51gemini900]

Read the manual, still confused on some parts, watched your video, crystal clear !! Your very good and thorough , thank you !!

[@WesternEquipment]

Awesome! I am glad I could help you out!

[@drmatthewajohnson3348]

Just purchased my mower. I'm NOT a mechanical type of guy. HOWEVER, you did a wonderful job of making everything easy to understand. Thank you so very much!!!

[@WesternEquipment]

I am glad I could help!

[@KCSLines]

Just signed papers on my Z530M today, looking forward to it! Keep up the good work on your videos!

[@WesternEquipment]

Awesome! When should you be getting it?

[@KCSLines]

@@WesternEquipment Should be delivered on Monday, it was still in the crate when we signed.

[@loxianne7432]

Thanks for the review and instruction!!

[@WesternEquipment]

No problem! Thanks for watching!

[@juliachu9633]

Very clear and detail!

[@WesternEquipment]

Thank you!

[@arthicks2566]

I just ordered one online. - 0 - APR for 36 months with John Deere Credit this is good until Jan 31, 2024. Thanks for the info.

[@p71collector]

I reverse the control levers from one side to the other to clear my big belly when going in reverse, works for me!

[@WesternEquipment]

Sounds like a good ideal to me! Thanks for watching!

[@timothyotoole8224]

u did a awesome job, I made sure I saved. thanks.

[@WesternEquipment]

Thank you and I hope it was helpful!

[@journeyon1983]

I bought this exact model zero turn mower and I love it. The cut looks professional. It will not clog with the huge exhaust chute. It's also great on gas. This model tages a little over 4 gallons of gas and I was able to cut a 1 1/2 acre at least 4 times before having to refill the gas tank. It's comfortable as hell. So if you're looking for a zero turn mower, this is it.

[@WesternEquipment]

Nice! Thanks for the feedback and some insight on the fuel consumption!

[@pyroman49wedd86]

Also my local dealer leaves there mowers outside in the rain. Until there sold. The same thing happens at home depot and lowes. So John Deere says not to use water but it sure not practiced before the sale

[@WesternEquipment]

I agree and I hate that this happens. But that is a good point. Thanks for watching!

[@GotHandlesForDays]

Those are not typically the ones sold...once you buy one they give you a brand new one out of the box

[@mikekeefe1311]

Nice job! Awesome!

[@WesternEquipment]

Thank you and thanks for watching!

[@gailjohnson6670]

Excellent review and video. You are very knowledgeable and explain in easy to understand instructions. I did learn a some things from changing transmission if mower is stuck and positions of front wheel for different mower heights. I have my 2nd Z540M. The only thing I dislike is where the oil filter is located to change. Very difficult to get at. Now JD have placed a drainage hose and bracket to obstruct filter change even more. I never had a problem where the oil drainage plug was located before with any type of oil mess. If there was a dab of oil just wipe with a rag. Especially difficult oil filter change first time from manufacturer. The filter is put on so tight. I use a wide mouth pliers to get oil filter off with a lot of muscle and mumbling. The oil strap didn't work for me to get oil filter off. JD should of reinvented oil filter location and left oil drainage plug alone. And I'm a woman doing the oil change and service. I noticed the air cleaner is lacking a black foam filter like mine has on it in this video. Thank you for the video. Blessings to you.

[@WesternEquipment]

Thank you for sharing and thanks for watching!

[@jameslamoureux8742]

Very helpful.

[@WesternEquipment]

Thank you and thanks for watching!

[@robsnyder3733]

Brent you are very detailed and knowledgeable on all JD products . I bought a Z530M not real impressed with a few options . I'm looking at buying the Z740R after watching your videos . keep up the great work and detailed information .

[@WesternEquipment]

Well thank you for the comment and I'm glad I could help. The Z740R is a very nice mower and I don't think you would be disappointed. Thanks for watching!

[@josephsantana3094]

What didn't you like about the 530M?

[@thomas7up123]

Great video!

[@WesternEquipment]

Glad you enjoyed it

[@Blade-mh3mi]

I ordered a Z530M today, going to get delivered tomorrow. Hope it last as long as my Z445 did. That was a great mower with no issues. Gotta stick with those Kawai's when it comes to mower engines.

[@WesternEquipment]

They are awesome mowers! I hope you enjoy and thanks for watching!

[@pyroman49wedd86]

How long did your z445 last. I think these mowers should last 10 years or more if properly taken care of with maintenance

[@fgonzalez78959]

One thing it needs is when you push seat over to look under it..it needs to lock..i folded seat over to the front and strong wind came and slammed it back down and almost hit me in the head when i was checking oil filter for leaks from that angle.Also wish they have a shute holder on the up position for loading into small trailer or door way into shed. The scalper wheels i put wing nuts on them bolts for quick take off to move them up or down. Love the mower its a beast with the Kawasaki engine and that pedal to move deck up is great.

[@WesternEquipment]

Awesome! Thank you for the feedback and thanks for watching!

[@MegaMantim]

Excellent!!

[@WesternEquipment]

Thank you and glad you liked it!

[@eshott2935]

Great video just bought this mower last month and upgraded with the headlights. I would like to see a video going over the pros and cons of the much on demand system maybe even showing the install. thanks

[@WesternEquipment]

I have that on the list so stay tuned and be checking our other channel 247Parts for install instructions. Thanks for watching!

[@chrisruiz1215]

Didn't know they had headlights...

[@pyroman49wedd86]

I found the canopy that fits the John Deere z500 series . They are also back ordered .

[@WesternEquipment]

I figured this would be the case. Thanks for watching!

[@pyroman49wedd86]

The canopy for the z500 series is LPA 11548

[@WesternEquipment]

Thanks for the info and for watching!

[@deevomas]

Thank you for the in depth details I’ve been looking for a video like this for a while. I’ve been looking to upgrade from my 345m to the 530m. Im curious to which you prefer when it comes to issues and performance for Briggs vs Kawasaki engines. Thanks.

[@MrOppie93]

Me 2

[@WesternEquipment]

I personally do not have a preference, but the general consensus is that the Kawasaki is the way to go. I hope this helps and thanks for watching!

[@fgonzalez78959]

Go Kawasaki ..its a beast no joke.i hope u got that one..i got it and dont regret it one bit.

[@MrOppie93]

@@fgonzalez78959 that’s the way I went .

[@pyroman49wedd86]

Would take the Kawasaki any day over Briggs .

[@reno4819]

With these reviews could you also briefly mention what optional equipment is available e.g. sprayer, trailer hitch, grass catcher, spreader, etc. and also could you cover how to remove/install the deck?

[@WesternEquipment]

Yes, I usually do a completely separate video over all attachments for the series of mower and then do a set of maintenance videos, including deck removal on our other channel 247Parts. Thanks for watching and stay tuned!

[@pyroman49wedd86]

Ready for a z530r demo

[@WesternEquipment]

It is on the list. Stay tuned and thanks for watching!

[@TreeJayyy]

Thank you for this video, Brent! I am struggling to find a bagger for this mower with the 60inch acceldeck, can you bag with the 60 inch deck? Thank you!

[@WesternEquipment]

As of right now there is not a bagger for the 60" deck on the Z5's at all.

[@loydgibson4393]

Just a comment on the dimensions you stated in the video. You said the mower without deck is 46.6". but, you also said for the 48" deck the width is 43.9"!

[@WesternEquipment]

My mistake, I meant to say 53.9" on the 48" deck with the deflector raised. Good catch and thanks for watching!

[@typsytrae]

Great video! One question though. You mention using air and not using water to clean the top of the deck because water could develop rust. Wouldn’t the bottom of the deck develop rust too, if you use the wash out port?

[@Blade-mh3mi]

Thats true also. But JD rather you not use water on top because of bearings and such. I always use my blower to clean mine after cutting and use water once a year when putting it up for the winter. But after using water I blow off the water with my blower. Never leave it sitting.

[@WesternEquipment]

Yes, it would but after using the wash out port you should always leave your blades running for a while to ensure the underside dries. Good question and thanks for watching!

[@andyluellen2978]

Hey great vid. I took delivery of this model a week ago, I just noticed my 48 inch does not have the front dual rollers on deck. Is this something I should consider adding on or is ok the way it is?! Thx

[@WesternEquipment]

If it doesn’t have the front rollers but does have the brackets then I would definitely add them. They are relatively inexpensive and will aid in the performance of your mower and cut quality. Good question and thanks for watching!

[@synopticfixes6213]

Airflow within the deck is not a good selling point when strength is the trade off. Airflow is not as critical as the stamped deck’s inferior strength. They get bent, when that happens blades go out of alignment with each other causing a poor uneven cut across the width of the deck. If you have a pristine level lawn no problem, however if have a variety of surfaces and rough uneven terrain or have to occasionally bump into things you cannot count on durability over time. I want something bulletproof, this is not. It’s cheap and a manufacturer shortcut. If it weren’t for that I would strongly consider purchasing JD, but the stamped deck is a deal breaker. I have a JD conventional lawn tractor that has a bent deck.

[@codymalone6343]

Yo! What might the part number be for the cover lid that comes on the r, for the accessory area to add to the m

[@WesternEquipment]

Check out this link and it shows the cover and the pieces to go with it. partscatalog.deere.com/jdrc/sidebyside/equipment/12463218/referrer/navigation/pgId/465750934.

[@andybub45]

Looks like a pretty decent mower and that seat looks great. Are the transmissions serviceable?

[@WesternEquipment]

There does not show to be a filter on these transmissions. Only a fluid reservoir.

[@M70ACARRY]

Nope, non-serviceable. It's also a stamped deck turd.

[@jolenecormack5212]

Can you tell me what the size off the tube steel the frame is made from ? Thanks

[@WesternEquipment]

This mower is 1.5" x 2" frame tubing. Thanks for watching!

[@markradford6325]

What about the operation, how it cuts, what problems have been reported? A seat is a seat okay but I want it to cut grass its a tool period. Oh by the way I have never used a cup holder on a mower when I cut to much dust. Were are the grease fittings and how much oil and air pressure. Deep dive details.

[@WesternEquipment]

I will make sure and try to hit more of these deep details in the next one. Thanks for watching!

[@glennchaffin8446]

Can the seat that comes on the Z740R be installed on the Z500 mowers? 530R or 545R?

[@WesternEquipment]

Unfortunately it will not. They have completely different bolt patterns and mounting pans. Thanks for watching!

[@blackhorse2947]

I have a John Deere Z445 and over the years the foam type handles have slipped down on the hand bars about 6 inches. Would appreciate any fix for this.

[@WesternEquipment]

You may have to either cut them off and replace them of try to work them back up into position and then find something to wrap around the handle bar to keep them from slipping down, maybe some tape? I hope this helps and thanks for watching!

[@dwayneoliver1659]

Is the z530m you can buy at lowes any good? Are they built by John deere or MTD?

[@WesternEquipment]

Yes they are fine! All John Deere mowers are built in either Tennessee or Wisconsin in the John Deere factories. There is a misconception that some are made by other manufacturers but that is not the case. Thanks for watching!

[@marcuspendleton6102]

Just purchased a z355e. Sir can I hook a bagger to this unit? It seems as though I can just unsure

[@WesternEquipment]

Yes, there is a bagger kit for this mower. Thanks for watching!

[@jrobinson953]

Totally not related but what kind of boot / shoe are you wearing?? I like them a lot.

[@WesternEquipment]

Haha! I am wearing Hey Dudes. They are my go-to shoe brand for just about every occasion. Thanks for watching!

[@gailjohnson6670]

@@WesternEquipment Where do buy the "Hey Dudes" boots at? I have a difficult time finding comfortable shoes for a myself a lady.

[@LeftyTubaBassist]

I am looking into buying a mower similar to this, a John Deere 2016 Z535M. The mower is not equipped with a rops system. Is this something I would be able to get installed? Thanks!

[@jeeplimited95]

I would recommend a 530 , they have the Kawasaki engine...much better than the kohler

[@0214Bub]

does the pto stay engaged when machine is in reverse or does it shut down?

[@WesternEquipment]

It stays on. It is not like the tractor style mowers.

[@TNCowboy2012]

Brent. I cancelled my order for the Z320R because I got a stump removed from my yard allowing me to go with a larger mower. My 2023 Z530R arrives soon. Can't find a full review on it anywhere. Could you review it please and thank you in advance.

[@WesternEquipment]

Congrats on the new mower! I will add it to my list and get one out as soon as I can. Thanks for watching!

[@BraedanBowlin]

What is the Best mower for a mowing business that don’t have a lot of money

[@WesternEquipment]

Honestly this is all based of of wants, needs, and the amount of money you are willing to spend. I have seen smaller mowing businesses uses as small as S100 series mower all the way up to the commercial Z900's and everything in between. The cheapest mowers are the S100 series and then they go up from there. All of these mowers can last if they are well taken care of. I hope this helps and thanks for watching!

[@pyroman49wedd86]

I have a question I have a z530R are the blades suppose to stop when you back up because mine does not

[@WesternEquipment]

No, not on a zero turn. The blades will stay engaged all the time. Good question and thanks for watching!

[@codyschutjer5725]

Will you do a video on this z530m installing the light kit

[@WesternEquipment]

Stay tuned to our other channel 247Parts. This video is coming up soon.

[@forget_simon7098]

Hey can you please help? My 1023e struggles to move with low throttle

[@WesternEquipment]

I would start by checking the hydraulic fluid and filters and then if you’re still having trouble I would check with your local dealer. I hope this helps and thanks for watching!

[@chrisfigueroa3361]

Why is my john Deere z530 ztrak tuning off while im cutting grass its strats to stutter then it shuts off my mower only has 33 hrs on it its brand new 2023.

[@LnboRS]

I have a Z535M and I am looking for the rear bumper and hitch. What is the part number for that? Thanks.

[@WesternEquipment]

The bumper is part number BG20913 and the hitch is BG20912. You can order both of these from 247Parts.com. Thanks for watching!

[@LnboRS]

@@WesternEquipment Thanks. Part ordered!

[@johndeere1951a]

Oil change serviceable axle drive transmissions is the most important point. Greaseable spindles, pivots, caster bearings all add up to long life reliability . Agree with the rounded deck design. Best air and grass flow. Dont park your machine outside⚠️⚠️⚠️

[@WesternEquipment]

Yes, all good points! Especially the last one!

[@Ed-sh8jt]

Can we install 23x10.5-12 tires from Z530R series model to rims on Z530M would they fit?

[@WesternEquipment]

No, because the rims on the Z530M would be too small.

[@Ed-sh8jt]

@@WesternEquipment Thank you for your reply,! I noticed the front casters assembly don't have a grease zerk to pump grease? Are we supposed to remove the bolt and manually add after X hours?

[@christophercalderon2946]

I’m not sure if it’s just my lawnmower but when I press down to lower the deck it doesn’t want to go down unless a certain way is there a way to fix that?

[@WesternEquipment]

Hmmm I have not heard of this issue. Are you meaning on the foot pedal or the yellow lever?

[@christophercalderon2946]

@@WesternEquipment when I follow the steps to lower it with pushing the pedal, putting pin and pushing yellow button it doesn’t go smoothly as if it gets stuck on the safety height or stays at the height it’s on but works when I lift up the deck

[@MegaBranigan]

Hey Brent when I turn my mower to the on position it has e33. Do you know what that means? My mower does not show the amount of fuel when I turn the key in the on position either.

[@WesternEquipment]

So this is a fuel level sensor code. You may need to replace the sensor but a technician would have to look at it to know for sure. I hope this helps and thanks for watching!

[@MegaBranigan]

Thank you for the response.

[@codyschutjer5725]

Just picked up my z530m today started it up and loaded it on the trailer just fine got home and tried to u load it and couldn’t get it started? Is there a fuel shut off valve? It cranks but won’t start choked it and gave it some throttle but no luck

[@WesternEquipment]

There is not a fuel shut off but did the dealer or place you bought it from put fuel in it? I know this sounds crazy but sometimes these mowers get sent out with hardly any fuel in them so this could be your issue.

[@codyschutjer5725]

@@WesternEquipment it was my fault warm weather does wonders it was too cold out so I put the nipco on if for half an hour choked it and it fired up 🤦‍♂️

[@pyroman49wedd86]

I needs some help . Are there any salvage yards across the country that deal with usedhoods for John Deere . I’m looking for the whole used hood setup for x360 . Has anyone seen any websites?

[@WesternEquipment]

I will be following this too!

[@dankruger2890]

i am super fat and need a seat to adjust way back, what machine do you recommend

[@WesternEquipment]

First of all, don't be so hard on yourself haha. I would try the Z500 series and up. Maybe go to the dealership nearest you and sit on one of each and see which is the most comfortable for you. Thanks for watching!

[@alexverde1490]

Can you review the Z530R

[@WesternEquipment]

This is on the list just waiting on inventory. Thanks for watching!

[@pyroman49wedd86]

I just got one a month ago. I love it . The ride is excellent. I’m not as sore after mowing . Be sure to get a Kawasaki engine in the z500 series . Which the z530 m and z 540r do

[@pyroman49wedd86]

He has on the2021 . There is no difference between 2021 and 2022 z500 r . I have a 2022

[@joecouncil]

Brent, It looks like John Deere has changed their website to reflect the 2023 lineup and it looks like the z530m or the z5 series has now got a Green Deck vs a Yellow Deck. Do you have any info on what else might have changed for the 2023 models?

[@WesternEquipment]

Yes, this is true. As far as I know, this is the only change to the Z5 lineup for ‘23.

[@franknbeans3651]

Loved my z530m when I bought it. Unfortunately it lasted 32.1 hours (Less than 2 years) before the transaxles on both sides started making horrendous whining noises. Wish I would have bought it from you guys, but unfortunately I was living in another state at the time. I was hoping that by spending good money for a mower it would be dependable but now I don’t know what to do.

[@WesternEquipment]

Did you take it back to your dealership? It should still be under warranty.

[@franknbeans3651]

So I bought it from Home Depot in TN before moving back to Oklahoma. Home Depot’s response is to reach out to John Deere customer service or find an authorized dealer. So they pretty much wash their hands of you after delivery is made.

[@user-hr6rl1ci3w]

What do you do when it will stay running

[@user-hr6rl1ci3w]

What do you do when the zturn will not stay running

[@frankeem3820]

How hard is it to actually change the belts on one of those?

[@WesternEquipment]

It is not bad at all since the foot platform can be removed to get to the underside of the deck. Good question and thanks for watching!

[@3492moore]

what about the gague how do you replace it

[@WesternEquipment]

I'm not sure what you mean?

[@3492moore]

@@WesternEquipment the hour and fuel gauge meter

[@RockyX13]

Nothing to do with this video, but I have a question. I'm about to purchase a new JD 3025e with FEL and backhoe. I'll be using this for moving dirt and leveling/maintaining my property (less than 10 acres) I'll be using a Frontier 60" BB & pallet forks, but no PTO implements for the foreseeable future. Would 25hp be too little for this tractor? I'm pulled towards the 3025 due to the lack of any emissions & price. My dealer has plenty of 3032's available as well, but as I said emissions, whatever machine I use will be sitting and running for extended periods of time so I fear the DPF on an emissions tractor will fill quickly. Is this a valid concern for a machine that'll be doing alot of backhoe work? ANY advice would be much appreciated before I make my purchase here in a few days.

[@WesternEquipment]

I would honestly look into a bit higher horse power. The good thing is with the DPF system you can keep working even if the exhaust is cleaning. I would play it safe and go with more HP rather than wishing you had it later on. I hope this helps and thanks for watching!

[@RockyX13]

@@WesternEquipment Thank you very much for the reply! I did however already purchase the 3025e, my dealer had a really good package deal on it. I should have it all in about a week. Thanks again!

[@pyroman49wedd86]

Doesn’t make much sense John Deere says only use air to clean top of deck. Use water underneath to clean. You get chips and dings underneath. The bottom is gonna get rust with that water clean out. I have mowed with my new z 500 series about 5 times . I just don’t trust a water clean out underneath . I always mow when grass is dry

[@WesternEquipment]

I see where you are coming from but if the cleaning is done correctly under the deck then there should be a drying period after the cleaning is done to prevent any rusting or further damage.

[@Mrclean--likesgrass12]

Why doesn’t John Deere make the 757 zero turn any more

[@WesternEquipment]

Good question. I know that John Deere is constantly working on improving their products and changing things up so I'm sure it was just all a part of that.

[@KennySherwood10]

This thing doesnt start, weird

[@joelindberg9386]

I'm transitioning all my Deere equipment to Kubota, Deere is out of touch with price and quality

[@WesternEquipment]

I am always open to hearing all opinions. What quality issues are you struggling with on the John Deere equipment?

[@andrewwolford3220]

Hate orange throttle and brake lever looks like child's toy. Also, hate the stamped metal deck with low mounted pulleys for 5k; it seems very under par compared to the rest of the market. Like the john deere dealers and their service great 4 year warranty, however my sale rep in my area not educated on the equipment he's trying to sell. Another dislike for me is the john deere sticker slapped on kawasaki motor. Plus john deere transmission they designed rather then going with the transmissions 90% of other commercial mowers are using. They seem to be going in an independent direction rather than trying to compete with leading commercial manufactures like Skagg, Ex mark Toro, gravely, grass hopper etc. All seem to have better build quality than the deere... tons of plastic on the deere weird slanted front mounted wheels... the list goes on. People buy these and other John Deere products for that green and yellow paint.

[@WesternEquipment]

@Andrew Wolford thanks for leaving a comment we always appreciate everybody’s thoughts. You have some good points and everybody seems to have different uses and needs that their mowers need to perform. I hear a lot of Deere mowers around for over 20 years and still running but there isn’t an argument on resale value. It’s something most of us don’t think about until upgrading mowers. That’s not important to everybody but selling your Deere on Facebook marketplace in 10 years will bring more than all the previous brands. I’ve seen brands and dealer support come and go but you can bank on dealer support from Deere. Thanks again for your point of view, we love hearing it all.