2023 Husqvarna TX/TC/FX/FC relayed lighting harness installation.

Installation instructions of our relayed lighting harness for 2023 Husqvarna TX/TC and FX/FC bikes. If installing the full dual sport and turn signal kit refer to the KTM installation video part 2.

[@grutzmac]

Thanks for the vid! I have the same bike! Need a fan too! Stoked to get your relay

[@Madtigertv]

Heard you cant run fan and light same time?

[@grutzmac]

@@Madtigertv highland cycles just posted a video doing exactly that, seems to work fine

[@techi3075]

@@Madtigertv gonna depend on what fan draw it has and what the light wattage is. It’s not gonna handle a BD XL80 and a trail tech fan but it may handle a 15w tusk fan with a 30w headlight. Personally, I want a stator rewind to handle 100 watts.

[@Madtigertv]

@@techi3075 everyone I knows got issues and dead batterrys

[@timothybroga1704]

I like your videos what I've seen so far You mentioned in a video you did with the FE350S that you were going to make a video on how to change the springs on the husky and KTMs Maybe I missed it in your playlist if I did could you put up a link or possible release date for a video if you haven't done it yet thanks like your videos

[@Jaysrippen]

Wondering why is relay needed? I'm no elect expert at all, but i see Slavens post on his fan and headlight wired in with no relay. I'd perfer no relays but am curious. Thanks, Jay

[@truenorthmotos9965]

So you don’t have power running when the bike is off. Same way KTM does it on enduro models. No chance of parasitic draw, no on/off switch to remember, also we include auxiliary power. Don’t have three extra ring terminals and harnesses running off the battery. One harness to do it all.

[@andrewfloyd4367]

Just double checking functionality of the headlight when you turn the bike off your light will eventually turn off so if you accidentally leave your switch on it will not drain your battery, correct?

[@truenorthmotos9965]

That is correct.

[@rickvonderchek6898]

I heard you have a tusk fan that works on the 2023 husky tx 300 . Does it have wiring harness you can connect to the battery ?

[@truenorthmotos9965]

It comes with one but we don’t use the supplied strait to the battery because it has a parasitic draw. We run it to our relayed harness.

[@SuperCarloschaves]

nice video. I have 2024 Husqvarna tx 300 any idea how can I put headlights ?

[@truenorthmotos9965]

Just headlight or headlight and taillight?

[@SuperCarloschaves]

Just the headlights. Thanks again

[@truenorthmotos9965]

@@SuperCarloschaves below are the two headlight options you can use on the stock stator. For the Cyclops you can only the Trailboss not the pro. There are options to add the headlight mask, mounting straps, and lighting harness in the drop down options. www.truenorthmotos.com/headlights/ktm-trailboss-led-headlight-insert www.truenorthmotos.com/headlights/baja-designs-s1-ktmhqv-evo-kit-by-motominded

[@joshblair92]

Is the Tusk fan constantly running using your harness auxiliary power? Or is there an inline switch?

[@truenorthmotos9965]

It has a display to set fan to come on at a certain temperature.

[@joshblair92]

Thanks for the reply. 👍👍

[@1Rustychain]

I've been looking at the 23 TX300. I don't know much about electricity, but all the power is coming from the stator. It needs to charge the battery and I'm not sure where your, getting the power to run the fan and the light. I watched another video, and they say that the stator should be checked at Idol, and they don't recommend running anything more than 20watts. Sure, it has the power to run both, but you will never recharge your battery, Is that correct.

[@truenorthmotos9965]

We run the light and fan off separate circuits so we can turn the light off if the fan is running for an extended period of time. So far haven’t had any issue running the light and having the fan come on for a short period. Yes MotoMinded made a video load testing and recommended no more than 20 watts. That is not what we found when load testing, more around 30-32 watts. Yes you should load test at idle but also at different rpm ranges. You don’t ride the bike at idle.

[@WASemiHardEnduro]

@@truenorthmotos9965 What are you basing that 30w off? What kind of "load testing" did you do? Did you just turn on the light and check battery voltage?

[@joshholloway8358]

Is this the same for the 2019 fc450???

[@truenorthmotos9965]

Similar. We have a kit for that bike on the site.

[@hughkerrigan4787]

Do you sell the light kits and fans with harness in one kit?

[@truenorthmotos9965]

Not on the site yet. I can make a kit for you though.

[@hughkerrigan4787]

@@truenorthmotos9965 that would be awesome!! I’ll try reaching you on your site!

[@MattLevy1202]

Would this work on a 2018 HUSQVARNA fc350?

[@truenorthmotos9965]

No, but we have a kit for that bike.

[@MattLevy1202]

@@truenorthmotos9965 thanks for getting back to me! do you guys sell just the wiring harness for the headlight and break light for my bike? I already have a headlight and tail light I got from a different build I’m doing. Or do I have to buy the whole kit?

[@truenorthmotos9965]

@@MattLevy1202 here’s a link. www.truenorthmotos.com/husqvarna-kits/husqvarna-relayed-lighting-harness

[@unknowng629]

Hi there I have a tc 125 2020 wanna run a brake light n front light how would I go about doing it

[@truenorthmotos9965]

Call me on Tuesday and I’ll get you setup.

[@unknowng629]

I’m in the Uk how can I contact you thanks

[@truenorthmotos9965]

@@unknowng629 [e-mail]

[@unknowng629]

@@truenorthmotos9965 email?

[@truenorthmotos9965]

@@unknowng629 that’s my email. You can also call the shop between 9-5 PST at 360-972-4355