2024 Kawasaki Ninja ZX6R First Service Tutorial: Oil Change, Coolant Refill, and Chain

  Рет қаралды 4,575

Maxamillion Ed

Maxamillion Ed

Күн бұрын

Пікірлер: 38
@roguethrottle
@roguethrottle 3 ай бұрын
good video. I'd recommend not using air to try to drain out more oil, use some fresh oil since youll have over half quart extra to flush out first. A lot of people have dirty, wet air in their air compressors. Also a micrometer at the chain tightening step makes it so alignment is perfect too. About to do the first service on my 2024 black zx6r also
@MaxamillionEd
@MaxamillionEd 3 ай бұрын
very good point. my compressor is new and drained daily, but I never thought of dirty wet air on older compressors. Never thought of using a micrometer. I'll definitely start using that tool for chain adjustment now.
@roguethrottle
@roguethrottle 3 ай бұрын
@@MaxamillionEd thats badass man cool to see someone receptive! Looks like you do great work keep it up
@alyssapate1170
@alyssapate1170 Ай бұрын
Make a video when you do yours
@roguethrottle
@roguethrottle Ай бұрын
@@alyssapate1170 too late im already on my 2nd oil change at 1300 miles. Absolutely loving my bike its dialed!!
@mrwick4875
@mrwick4875 Ай бұрын
Also I have a 2023 zx6r tuned and I Change my oil every 1200 to 1500. Using AMSOIL in all my bikes and cars never had issues.
@mrwick4875
@mrwick4875 Ай бұрын
Nice bike and great job but can’t mix coolant it might gel up specially with that coolant you put in.Also needed to clean the chain every 400 to 600 miles.
@SKEEZOTHEREALSKEEZO
@SKEEZOTHEREALSKEEZO 4 ай бұрын
I did my first and second oil change at 200 and 900. Ive heard a lot of people say it helps get rid of the metal shavings and beter for the engine break in. Who knows. Nice bike i have the same setup but RPW
@ScooterNinja
@ScooterNinja 4 ай бұрын
i did my first service at 250km/1 month as my running were low.. now its at 1400km and my second service is scheduled next month .. should i skip the oil change? dealership said you can skip it and get your oil changed every year as your running is low..
@MaxamillionEd
@MaxamillionEd 4 ай бұрын
That’s one way to do it.
@MaxamillionEd
@MaxamillionEd 4 ай бұрын
Why is your bike running low on oil? Is it a 2 stroke or 4 stroke?
@SmokeyTheBear00
@SmokeyTheBear00 4 ай бұрын
@@ScooterNinjayou shouldn’t be “running low” unless you have a leak or you’re burning oil. Also I wouldn’t listen to that guy. One oil change a year is not nearly enough.
@SKEEZOTHEREALSKEEZO
@SKEEZOTHEREALSKEEZO 4 ай бұрын
@@SmokeyTheBear00 I think he means he's not really riding the bike. His mileage is low idk tho
@carolopwz
@carolopwz 4 ай бұрын
Felicitaciones primo
@eddie_santos
@eddie_santos 4 ай бұрын
Great info Eddie
@johnmarkjumawan9091
@johnmarkjumawan9091 Ай бұрын
Is Ravenol Racing 4-T SAE 10W-40 moto oil, Good for Zx6r 2024 too? Thanks for the respond and info.
@MaxamillionEd
@MaxamillionEd Ай бұрын
Yes it is!
@johnmarkjumawan9091
@johnmarkjumawan9091 Ай бұрын
@@MaxamillionEd Thank you so much for the info 👍👍👍
@chappi9131
@chappi9131 Ай бұрын
How about clutch lever adjustments?
@MaxamillionEd
@MaxamillionEd Ай бұрын
they usually come with the right amount of tension during uncrating. i would recheck it at around 10k miles
@alexvstheworld420
@alexvstheworld420 2 ай бұрын
At 14:33 you put the same counter pin back on? But you also bend it when before it wasn’t bent so if you take it off again would you just need to replace it I’m sorry I’m new to bikes
@MaxamillionEd
@MaxamillionEd Ай бұрын
you can reuse a cotter pin once. anymore than that and it can break off when you bend it back. it loses integrity the more you bend it back and forth
@Justbored27
@Justbored27 4 ай бұрын
Would the engine mess up if I top off the coolant with what you show in your video? because the coolant is green and you have blue. Genuine question, I want to do this as well but still new.
@MaxamillionEd
@MaxamillionEd 4 ай бұрын
What you want to check is propylene glycol and ethylene glycol on the bottle. Kawasaki uses a green one and Honda uses the same exact formula but it’s blue. If you were to mix ethylene with propylene let’s say half and half you’ll have weaker cooling because they each react at different temps. If you were to mix the two and just did a top off where one ratio is way more than the other type you’ll be ok.
@adambaxterr
@adambaxterr 4 ай бұрын
Use new oil to wet filter o ring
@nooplayer9742
@nooplayer9742 4 ай бұрын
Doesn't matter much...
@MaxamillionEd
@MaxamillionEd 4 ай бұрын
Unless you were rubbing oil and mud together over the rubber o ring, you'll be fine with a little of the old oil
@karysashair4728
@karysashair4728 2 ай бұрын
Is that the highest that lift will go???
@MaxamillionEd
@MaxamillionEd Ай бұрын
it goes higher. i'm just short
@karysashair4728
@karysashair4728 Ай бұрын
@@MaxamillionEd oh, I want to get a lift to service both of my bikes but I need a lil more then that. Good to know.
@karysashair4728
@karysashair4728 Ай бұрын
My back is fcked
@MaxamillionEd
@MaxamillionEd Ай бұрын
@@karysashair4728 harbor freight lift for the win. You can find used ones on Facebook marketplace just need a friend with a truck
@karysashair4728
@karysashair4728 Ай бұрын
@@MaxamillionEd they look damn cheap for new at HB. I have truck and enclosed
@Boombatty
@Boombatty 4 ай бұрын
That chain is too tight
@MaxamillionEd
@MaxamillionEd 4 ай бұрын
1.2-1.6 inches is within spec.
Tips for your First Service on a Motorcycle (600 miles)
16:07
Yammie Noob
Рет қаралды 21 М.
2024 ZX6R GAINS 37HP at the top end!
7:08
2 Wheel DynoWorks
Рет қаралды 37 М.
1, 2, 3, 4, 5, 6, 7, 8, 9 🙈⚽️
00:46
Celine Dept
Рет қаралды 111 МЛН
Кто круче, как думаешь?
00:44
МЯТНАЯ ФАНТА
Рет қаралды 5 МЛН
When u fight over the armrest
00:41
Adam W
Рет қаралды 31 МЛН
Don't underestimate anyone
00:47
奇軒Tricking
Рет қаралды 16 МЛН
Newish Rider | Why I Started on a 600cc (Ninja Zx6r)
14:05
MotoMirage_636
Рет қаралды 14 М.
KAWASAKI NINJA ZX10R: Complete step by step lowering guide
36:09
Maxamillion Ed
Рет қаралды 458
Kawasaki Ninja ZX-4RR Oil Change & First Service
18:00
TREY ON TWO
Рет қаралды 13 М.
2013 Kawasaki ZX6R 636 Valve adjustment
16:40
Tony
Рет қаралды 14 М.
2024 ZX6R Slip On Exhaust Testing and Tuning!
6:35
2 Wheel DynoWorks
Рет қаралды 38 М.
2024 Aprilia RS660 Lowering Tutorial - Step by Step Guide
33:33
Maxamillion Ed
Рет қаралды 1,4 М.
Kawasaki Ninja ZX-6R - 14,000 RPM Madness | Faisal Khan
17:11
Faisal Khan
Рет қаралды 114 М.
Kawasaki Ninja ZX-6R / Chain Tension Adjustment / No Stands Needed
12:43
Love. Live. Go Fast.
Рет қаралды 5 М.
2024 Ninja ZX-6R Break In Oil Change - 1000KM/600 Miles
9:03
1, 2, 3, 4, 5, 6, 7, 8, 9 🙈⚽️
00:46
Celine Dept
Рет қаралды 111 МЛН