2024 Ranger Raptor Oil Catch Can installation and explanation (so easy a caveman could do it!)

Рет қаралды 2,917

flaberdoopin

Күн бұрын

Пікірлер: 42

@SYN_Raf 21 күн бұрын

Great vid. Going to order this as well.

@flaberdoopin 19 күн бұрын

Right on. If I were to order again I would have gotten the double

@SYN_Raf Күн бұрын

@@flaberdoopin well if you decide to get the double and want to sell your single i can be your guy haha I wish i got my raptor sooner to get that coupon deal.

@flaberdoopin Күн бұрын

@@SYN_Raf right on… I’ll probably place my order for the dual valve this weekend and I’ll let you know when I have it installed and pull the single out.

@AgntCpr 3 ай бұрын

Great guide. I just installed my single valve UPR yesterday. This was easier to install than my Ford Performance one for my old F150 and will be easier to empty. Went with single valve so I can easily remove it if I have to take the truck in for service or to take it off in winter.

@flaberdoopin 3 ай бұрын

@@AgntCpr that is great to know about the ease compared to the ford performance version, i didn’t realize ford performance had catch cans. Excuse my ignorance, but why would you take it off for the winter? What is the downside to having a catch can on in the cold? Wondering if i should take mine off as well come freezing time’

@AgntCpr 2 ай бұрын

@@flaberdoopin Up here in Wisconsin, it can get brutally cold and my vehicles are parked outside. Vapor condensate can freeze causing the catch can to fill up faster. I had to check mine at least once a week to keep it from becoming a problem. I believe it helps if the hoses are wrapped in insulation.

@woodmanjc 2 күн бұрын

Use the catch cans from ford performance, which doesn't void the warranty and covers both turbos’ banks.

@flaberdoopin 2 күн бұрын

I'm going to look that up and may go ahead and buy it... i am interested in covering both sides instead of just one.

@woodmanjc 2 күн бұрын

@flaberdoopin I ordered the kit and put it on my bronco raptor a couple of months ago. The kit is close to $550.00.

@woodmanjc 2 күн бұрын

@flaberdoopin I put the Ford performance catch cans on my Bronco Raptor. I think they are worth the $500. Installation only took around 1 hour. I'll see how much they catch on the next oil change.

@rhite3783 3 ай бұрын

Great video! I will be ordering one soon, just did a Leer bed cover and ceramic coated my RR. Need to build my savings account up again. Lol

@flaberdoopin 3 ай бұрын

leer makes great stuff for sure! You'll be fine waiting a bit on the catch can, just throw it in when you can and dont look back! Cheers

@AlexandStuff 3 ай бұрын

See, 10 minute install, told ya. Great video as always!

@flaberdoopin 3 ай бұрын

You were right. I was skeptical at first but then when I finished I was thinking I must have missed something because it was so easy! Cheers and thanks for the write up on the forum, much better than the installation instructions on their site!

@lespaulguitarist92 2 ай бұрын

only really needed one catch can that connects to the valve cover to intake manifold side. The sides where the valve covers connects to the intake doesn't really produce any liquids, so it's not needed unless the engine is in poorer state... like bad compression rings.

@flaberdoopin 2 ай бұрын

great information, thank you for the input. So you are saying that this single valve catch can on the pax side doing right into the intake manifold is good enough for stock setup? that is good to know/hear.

@noobwolfplaygame620 2 ай бұрын

will there be oil catch can update video maybe around 2-3000 miles later?

@flaberdoopin 2 ай бұрын

For sure. i'm going to do my next oil change in 1500 more miles so i'll check it then. I will also probably give it a look in 500 as it recommends that in the install instructions just to ensure it is functioning.

@Richard-yr5zj 3 ай бұрын

I went to UPR. There are a few options (some are just colors) to pick. What are the options you selected?

@flaberdoopin 3 ай бұрын

@@Richard-yr5zj i went with the single valve as mentioned and the only option i selected was the magnetic drain plug… the rest i left as “no”. And if you are going to order it, the code i got for discount was actually from one of the facebook groups, not the forum. Code was UPR7. Hopefully it will still work for you and save you a few bucks.

@opadilla123 2 ай бұрын

Catch cans are mostly used for direct injected only cars ,ford did with this raptor what toyota does with there cars they have direct and port injection to fix that problem so catch can is not really needed

@flaberdoopin 2 ай бұрын

I didn’t realize that. Are you saying they aren’t really needed on a Toyota or they aren’t necessary on the raptor? I am not a mechanic, I just understand the basic concept so any info you have is greatly appreciated! Cheers and thanks for the comment

@opadilla123 4 күн бұрын

Cars with diract and port dont really need it but a little extra clean is even better so yo can okso use the catch can

@RxngerRxptor 3 ай бұрын

Well idk but USA but people have Crazy Ranger Raptor's in my country a there is a one of one straight piped

@flaberdoopin 3 ай бұрын

Nice

@RxngerRxptor 3 ай бұрын

@@flaberdoopin did you already service your car?

@flaberdoopin 3 ай бұрын

done two oil changes and a tire rotation so far.

@timfoster4530 2 ай бұрын

Hey there, you said there was a coupon code for this? Did you have a link to that?

@flaberdoopin 2 ай бұрын

The code I used was UPR7, hopefully that is still active

@timfoster4530 2 ай бұрын

@@flaberdoopin Thanks,I appreciate it.

@FriedBalonyPony 2 ай бұрын

Took your struts and ditch lights off?

@flaberdoopin 2 ай бұрын

I kept the ditch lights on, but took the struts off... it was putting way too much strain on the hood. apparently the hoods on the Australian model are steel while ours are aluminum here in the USA. The aluminum couldn't handle the stress of all that torque on that single point and it was close to buckling so i took them off. Looks like some other companies have desiged some that work great on the aluminum hoods here in the US with different brackets but i am good with just the ditch lights for now.

@FriedBalonyPony 2 ай бұрын

@@flaberdoopin That's what I figured. There had to be a reason they didn't include that in the design. Thanks for replying!