Рет қаралды 2,788
Last year I created my very own 20ft. outdoor lighted Christmas tree. Needless to say I had some issues with putting it up and keeping it up. This year the Tree is back and better than ever. Using
my previous experience, I made this video to give you tips and tricks to make it much easier. The base of the tree is the most important part and this year I found just the thing to use. This video is a companion video to my tutorial last year. In That video I walk you step by step to making the tree. In this one I focus more on tips and tricks to make your life easier.
Last Years Video Tutorial:
kzbin.info/www/bejne/p2fJeYNmjq10bNU
Full Supply List:
1 American Ground Screw Model 2 (this makes a perfect base for the tree)
5 10ft. 1/2 inch PVC
2 10ft. 1 inch black steel pipe
1 3ft. 1/2 inch black steel pipe
6 1/2 inch PVC tees
1 1 inch black threaded flange
1 1/2 inch black threaded flange
1 1 inch black steel coupling
1 pine edge glued panel round board
6 200 light LED C6 67ft. strands
1 LED Star
Zip Ties
8 screws to attach the flanges to the wood
Total cost: $400-$500. This can vary greatly depending on the type of lights you choose and the type of star you buy