20Kw Deye Grid-tie installation

#supermax
#levantbaysolar

[@kaiw6146]

New subscriber here sir. Great job! Hope to learn a lot from your shares. God bless you.

[@solar_isangpinoytech.6328]

Thanks and welcome

[@aicollectioncorporation6193]

paano po ang wiring ng Eastron meter limiter kapag naka parallel ang 2pc 10kw deye on grid inverter? May video po kayo kung paano isetup ung bagong limiter ng DEYE?

[@kimdarwinpruebas]

Sir question lng po. Dalawang 6kW deye grid tie.. 2pcs ct. If mataas load i mamax power.muna nung unang inverter then if max na papasok si 2nd inverter. Paank po ba i babalance sila na hati production sa load?

[@etv4075]

sir, ask ko lang, yung fan ba ng 10kw deye on grid inverter, tahimik lang..or hindi talaga umaandar?

[@arnoldali755]

Boss pwede po bng mg parallel kh8 walang eastron meter

[@kentonfortu3764]

Good Pm po ,.. pde po paturo ng wiring ng dalawang deye 8kw Grid tie… 2 ct sensor po ba ang i ca clamp

[@user-zd5bn1ze3p]

Hi sir, ask lng Po ano Ang mga needed para sa pag parallel ng 2 deye inverters? Single phase easteon meter lng Po b?

[@janken937]

Sir gud pm. Bakit kaya di lumalabas utility or load ko sa inverter. Sa Solarman din. Thanks

[@TubolMotoadventures]

magkano yang estron meter sir? required for parallel talaga para mag sync?

[@angelitotimbang3076]

Pre nkasubs nko..my chat ako sau msyado k yta bc😅

[@solar_isangpinoytech.6328]

Busy busyhan dre

[@angelitotimbang3076]

@@solar_isangpinoytech.6328 mgkanu n ulit ung 550w mo pre?..baka mkabiki kmi 3pcs

[@musicandsoulbinder343]

sir pano mag parallel ng walang eastron meter?

[@bostonzworld9072]

magkano po estron meter at meron po ba kayo binibenta?

[@charddenosta4720]

Idol magkano aabutin ang pa install rapid shutdown para sa 10kw panels 24pcs

[@solar_isangpinoytech.6328]

20k labor at wiring

[@jayworkzkuyajay1067]

Boss papano mo nagawa maging master at slave ang isang inverter

[@solar_isangpinoytech.6328]

Go to Run Parameter, Select Meter On.. Long press sa Meter On.. Selection will appear to set your inverter to master or slave..

[@vherimperial5313]

Hi po, good day..query lang. Confuse po kasi ako about sa home load and backup load connection. I have this 5kW Deye hybrid installed. As per manual, the backup load should be connected in inverter's load port at ang home load sa grid port after the breaker. Question po is pag loaded ang homeload hindi po sa sa grid sya kukuha ng power or the inverter itself will provide the power instead of drawing it from the grid? Sa ngayon po kasi ang setup ko lahat ng load nakakabit sa load port ng inverter at yung grid port ay AC supply from the grid. Thank you po.

[@solar_isangpinoytech.6328]

Load port of deye inverter should be not exceeded 80% of the capacity of inverter, that's why we call it for critical load only during power outages.. if you put or connect more of your house load to the load port, you may damaged the inverter soon...

[@vherimperial5313]

So that means po na yung grid port act as output din po ng inverter to support the houseload (while the grid is on), tama po ba ang pagkaka-intindi ko?

[@solar_isangpinoytech.6328]

Yes! That's we called Grid-tie.. If your harvest of solar panel is not enough then the grid will go in and gives remaining power needed..

[@vherimperial5313]

@@solar_isangpinoytech.6328 Last na po na question kung hindi kalabisan...as you said kung hindi enough yung harvest ng solar panels, the grid will take the load (am talking about the hybrid deye grid port po) pero pag sa gabi yung battery ko(one solar 48v 220ah) ang sasalo sa load so yung output pa rin ng inverter ang mag-susupply sa home load ko na connected sa grid port, tama po ba? Salamat po sa tugon ninyo...

[@solar_isangpinoytech.6328]

Correct! By Using "Time of Use" battery can supply your power during the night as grid tie mode.. but not only night, during the daytime pwede and usefull as well para hindi kumuha ng more power sa grid ang load demand.. "Time Of Use"

[@user-ui6bk7jj1t]

Gudpm sir available ba kay supermax ung eastron meter with ct para s 2pc 10kw gti 1p..

[@solar_isangpinoytech.6328]

Eastron meter for single phase now available @ supermax

[@sethguevarra4218]

Sir 2 10kw gti paano po yung setup sa configuration at sa setup nang diagram with netmeter na po sya.salamat po sana mapansin..

[@solar_isangpinoytech.6328]

One pair nlng ng wire going to Nema box at rec meter and compute the total capacity... kung naka individual ct ka ilalagay mo yan sa labas sa main nema box mo after the meter hindi na kailangan alisin ang ct.. same parin ang setting na naka limit on but kung mag i export kana just set 100% feed in para hindi mawala ang display sa app..

[@sethguevarra4218]

@@solar_isangpinoytech.6328 kung hindi ko napo ilalagay yung ct ok lang po ba? Bali nag parallel lang po ako nang inverter tamo po ba yun at wala napo akong nilagay na ct at naka off narin po limiter ko.meter ko po off din po.

[@solar_isangpinoytech.6328]

Pwede nmn..but production nlng ang makikita mo sa app kapag inalis mo ang ct at naka off na ang limiter

[@sethguevarra4218]

@@solar_isangpinoytech.6328 sa setting po nang inverter wala na po akong babaguhin? Salamat sayo idol ...malaking kaalaman at tulong po sa akin yan.salamat

[@etv4075]

Sir pwede din ba mag parallel 2 pcs 10kw using 2 ct sensor wirhout easteon meter?

[@solar_isangpinoytech.6328]

Yes pwede

[@etv4075]

okey po, if ganun po 2 ct sensor, san po papunta ang arrow ng ct sensor?

[@solar_isangpinoytech.6328]

Sa load parin ang direction ng ct arrow

[@etv4075]

@@solar_isangpinoytech.6328 noted sir, thanks sa info

[@jesusmaneclang472]

Good am po sir , Wala po kasing naka labas na connector para sa limiter ng nabili ko na grid tie deye inverter , saan kupo ba dapat itap ito sa loob ng inverter ? Sana masagot sir salamat :)

[@solar_isangpinoytech.6328]

for eastron connection sa rs485, Eastron meter A&B tapping to 3&4 of rs485 jack...

[@ronaldli8452]

Sir paano mo e setup ung eastron meter sdm120?

[@solar_isangpinoytech.6328]

I posted on fb

[@ronaldli8452]

Ano name po sa fb? Salamat po

[@vicdd2889]

Tig isa ba sila ng limiter?

[@solar_isangpinoytech.6328]

Kung ang gagamitin niyo is meter, isang ct sensor lang pwede na.. combine output ng A&B connection.

[@vicdd2889]

@@solar_isangpinoytech.6328 pwede rin ba gamitin ang tig isang ct sensor nila?bali yung dalawang ct sensor ilalagay sa linya ng main line. Wala ba magiging problema