225 Simple 4th Axis setting up in Mach3 with SERVO or stepper motors

4th Axis setting up in Mach3 with SERVO or stepper motors without a CNC wrapper program.
Thank you for watching
Help support my channel and become a Patron
www.patreon.co...
Plans and parts listing available on my Patron pages for the, AMAX 3636, MIDI 4040, MAXI 1212, and AMAX 3636 CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe + Mach 3.5 Info
My CARVECO 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
store-us.carve...
The Australian Inventors Workshop™ 2023
Sponsored By
Thunder Laser Global
My Fusion 360 20% discount
(ONLY AT THIS ADDRESS BELOW)
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.

[@U_Kamrc]

I would do Mach3 calibration with 1 full turn (calc. distance Pi x Dia) not 50mm and inaccurate and clumsy tape measurement)

[@kailashmalviya8]

Power during work in rotary,how to go back setpoint perfect location

[@salihbayindir7628]

Very good explained . i am so poor for english but i understan all . Thank you Roger

[@rogerwebb9600]

You are very welcome

[@salihbayindir7628]

@@rogerwebb9600 is there some way for contact with you Mr. Roger

[@ozmouthpieces]

My friend! Excellent! Thanks!!!

[@umargul5644]

Great job sir thanks

[@rogerwebb9600]

Most welcome

[@user-nu6cg9cb2e]

Love your videos. Please, What are the port & pin settings for all the servo motors? I need to get mine to turn, b4 calibrating. Thanks

[@kailashmalviya8]

After power loss during job work in rotary how to start again

[@rogerwebb9600]

Restart the same as in flat axis, tell Mach 3 to start in a line of Gcode in the file 20%in 50%in and so on

[@kailashmalviya8]

@@rogerwebb9600 homing sensor is need to install in rotary

[@kailashmalviya8]

@@rogerwebb9600 any video

[@binbogamakine7803]

Teşekkür

[@rogerwebb9600]

Thank you, for watching, Please like, subscribe and forward the video on to a friend, Australian Inventor Roger Clyde Webb;-))

[@stuartmorris4694]

Look's like Roy cubby brown

[@DronemanfromNepal]

Can we do the same in NC-Studio ?

[@Tjup]

i just bought the 4th axis, but im so confused, do i really have to set the move of A each time i change the diameter? cant i set the degrees instead? 360

[@rogerwebb9600]

There is a facility on my patron pages for technical help www.patreon.com/user?u=15079773

[@Tjup]

@@rogerwebb9600 after some digging, ur doing it the wrong way, its degrees, not distance..

[@DronemanfromNepal]

Is your CNC router made in china . I could see Chinese character saying X,Y,z axis in Chinese

[@MekazaBitrusty]

This seems odd. I would have thought the a axis would work in degrees not mm.

[@sootydave1]

Manfred, I have to agree. All my CNC experience has always been. Only XY&Z are linear. A Axis, is rotational therefor is in Degrees..

[@Hoss_1966]

I agree, should be steps per degree, then if you put your radius of your work in the settings tab in the upper right at the rotation radius, mach3 will calculate it for you. This seems very inaccurate and a real pain in the...

[@pablogarra3103]

I AM SUBSCRIBED TO YOUR KZbin CHANNEL FOR 1 YEAR, LET ME ASK YOU A TECHNICAL QUERY ABOUT THE CALIBRATION OF MOTORS IN A CNC ROUTER, MAYBE I HAVE AN ANSWER TO MY CONCERN. WHEN PERFORMING CUTTING OPERATIONS, IN MY CNC ROUTER THAT OPERATES WITH ARDUINO, IT PRESENTS DIFFERENCES IN MEASUREMENT WHEN IT MOVES IN THE DIRECTION OF THE X-AXIS, THIS OCCURS APPROXIMATELY AT THE MIDDLE OF THE TOTAL DISPLACEMENT OF THE CNC MACHINE, THE MOST BIG PARTS REMAIN 1mm. IT HAS APPROXIMATELY A TOTAL TRAVEL OF 1850 mm. I HAVE PERFORMED CHECKS ON THE RACK TEETH, I HAVE EXCHANGED RACK SECTIONS BUT THE ERROR OCCURS IN THE SAME WAY. BETWEEN 900 - 1200 mm THE PIECES THAT ARE OBTAINED ARE 1mm LARGER, THE CURIOUS IS Q THE PIECES THAT I PERFORM OUTSIDE THAT RANGE OF DISTANCES, EITHER LESS THAN 900 mm AND / OR GREATER THAN 1200 mm, ARE IN THEIR CORRECT DIMESIONS. MY SPECIFIC QUESTION IS HOW TO PERFORM THE CHECK ON THAT ENGINE (X AXIS) AND IF THERE IS ANY VARIANT TO MODIFY CONFIGURATION PARAMETERS THROUGH THE ARDUINO. THANK YOU FOR YOUR TIME, I WAIT FOR YOUR COMMENTS.

[@rogerwebb9600]

Hi, there is a help facility on my Patron pages www.patreon.com/user?u=15079773