#244

Email us at [e-mail] for purchasing any demo's that have been done or for any custom orders!
JOIN MY NEW FACEBOOK GROUP HERE!! / 233554272787110
Buy Me A Coffee Here! Thank you so much ! bmc.link/glitz...
To Become A Member of My Channel: www.youtube.co...
Would you like a tour of my new resin room with poured resin counters? Click here: • #5 Full Tour Of My Res...
Click here for an easy quick way to clean your wet resin containers: • #13 How To Clean Your ...
Click here to see how I mix my resin perfectly every time! • #231 How To Perfectly ...
________________________________________________________________________
ITEMS USED TODAY:
Let's Resin 150oz deep pour resin: amzn.to/43BMQwX
Don's Mold: Large crystal tower mold:👉amzn.to/44qJRaU
Michelle's Mold: amzn.to/3L6FECt
_____________________________________________________________________
Let's Resin Affiliate Links:
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Let's Resin 150oz deep pour resin: amzn.to/43BMQwX
Let's Resin 20oz fast cure resin: amzn.to/44U9hOZ
Let's Resin 720z fast cure is amzn.to/3QCH3EH
Let's Resin 1gallon epoxy resin: amzn.to/3DJNRsd
Let's Resin 1 gallon table top resin: amzn.to/3Qxmidz
Let's Resin Polyurethane resin: amzn.to/3Q0qC4E
Let's Resin white alcohol ink (C deeper): amzn.to/3O4ZI8W
Let's Resin 450ml silicone cup: amzn.to/43SZOXv
Let's Resin 26 colors ink set: amzn.to/3q2vmMn
Let's Resin resin tape: amzn.to/47qgisU
Let's Resin collector mat: amzn.to/47tUkWa
Large crystal tower mold:👉amzn.to/44qJRaU
Intense chameleon powder👉amzn.to/3sp7gfM
________________________________________________________________________
Resiners Resin Dryer for Cup Turner --
resiners.com/c...
Amazon link For Resiners Products:
the AirLess bubble removal machine --www.amazon.com...
Resiners Resin Dryer for Cup Turner -- www.amazon.com...
_____________________________________________________________________
Misc. Items
99% Alcohol: amzn.to/3Z83cve
Heat Gun: amzn.to/3n6j9ol
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Large Disposable Mixing Cups: amzn.to/3TuByqW
Small Disposable Mixing Cups: amzn.to/3A2QCTy
Silicone Tool: amzn.to/3orcB46
Craft Knife: amzn.to/3KcLpOW
Deburring Tool: amzn.to/3lBzAs8
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Tumbler Turner: amzn.to/436Lrye
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Mica Spoon: KN10425
Cricut: amzn.to/3Qh1LcM
Happy Mail:
8730 Mystic Circle
North Port, FL 34287

[@resinlover]

It was still super fun to watch and also a learning opportunity for all of us. Thank you for sharing ❤

[@glitznglitterbymichelle1]

You are so welcome!

[@dawngreen5772]

Don't let the first pour cure completely before you do the second, if it's still tacky you won't get the lines 😊

[@glitznglitterbymichelle1]

That was my intention but my timing was off 🤦‍♀️🥴

[@elisahiggs5864]

You two are so cute together and so funny. I look forward to seeing your videos. Thanks for the entertainment.

[@glitznglitterbymichelle1]

Our pleasure!

[@sonflowergems]

Competitions are always fun with you guys. ❤

[@SuzieQ-z6h]

for me Don wins this one i can defo see that there is a rose inside, with yours michelle the rose looks squashed at the top, so maybe the wrong mould for the design you wanted as for the lines, dont let the first pour fully cure before you do the 2nd pour, it will blend together better

[@mookzmom]

I won't vote, but I'll give you a giggle. I've been repackaging my micas and glitters, so everything in my house is now shiny, including me, my cat, and the air conditioner intake vent. My cat also is sporting an orange arm and a pink belly because he hates baths.😂😂😂

[@glitznglitterbymichelle1]

Omg that’s funny 😄 thanks for the smile 😊

[@debranewbigging641]

Minus the line, I think both turned out pretty. Michelle, the bag mold is great, and Don, the blue is so vibrant. I call a draw. They are both beautiful. 😊❤

[@KarenYauney]

Michelle you are so Blessed to have Don in your life. Tho I'm sure you know❤❤. Mine passed almost 3yrs ago. Take Care. May God Bless you both❤❤❤❤

[@annedarmody9132]

I would have taken the chance and poured in one. I’ve poured a 10 cm mould with no probs - didn’t use a curing machine though. I have heard if you pour the second layer before the first is cured (still soft) it works.

[@glitznglitterbymichelle1]

I’m going to try again with no layers. I ended up not using the curing machine too. And because of the timing when it was tacky to pour we were sleeping 🤦‍♀️ so all my ideas backfired 🥴

[@liadubruyn5285]

I like both even with the line.....❤

[@wolfgirl-bp9uz]

I love them both the line is okay the glitter on his looks like magic coming off the Rose place a ribbon around that line nobody'll see it I love your competition's you to keep going good

[@glitznglitterbymichelle1]

Good idea with the ribbon!! 😃

[@kimclayton5814]

The bag is really cute😊

[@LostSiren13]

Back to the drawing board on these. If that line wasn’t there it would look amazing. So I’ll pass on voting. Darn it. 🥰

[@maddieadams75]

😂 I’ll bow out on who didn’t win. ❤

[@elaineprovan4500]

I've poured deep molds in one go and never had a problem. I'd try that if you want to do those again...😁

[@glitznglitterbymichelle1]

Thank you I'm going to pour that in one shot next time for sure!

[@pamwineinger2374]

I have poured the bag all at one time. I used liquid glass deep pour. They are still very pretty

[@glitznglitterbymichelle1]

Thank you!! Great to know!!! I’ll be trying something else in there and it will be one pour for sure!

[@Coyo-Tea]

Oh bum what a shame you both got lines and they were not what you hoped for. Better luck next time guys ❤

[@SkitchBean_aka_Christine_E]

Too bad you got lines. Thank you for sharing this video regardless. I bought some of the roses to do the same thing with. I am glad to know what not to do if I have to split the pour up. You are both so much fun to watch. ❤❤❤

[@glitznglitterbymichelle1]

Yep I think when I use these molds again it’s going to be one pour next time 😑

[@patdavis1468]

The bag is cute, but other than that it’s a tie😁👍🏻❤️

[@karenr4773]

I like both

[@kimclayton5814]

You could saw them off at the line and then sand and top coat the bottom cut edge. Still getting a pretty peice that you could light from the bottom.

[@Orca2019]

well I waited for this competition, and how sad that it didn't come to fruition. The good news is you can have ANOTHER comptition right away. NO vote from me. Next time you need to choose a mold fitting the object. Love you both😍😍🤗🤗💞💞💙💙

[@riannonwhitford5883]

What good fun how disappointing about the lines I’ve done the crystal mold in one pour with deep pour resin. Make sure you give them a mother go ❤I love watching your videos especially the challenge ones always make me laugh 😂

[@michellekelly9460]

I saw a Steve McDonald video where he poured the deep resin into the mold all the way!

[@glitznglitterbymichelle1]

That’s what I’m doing next time for sure!

[@angiesartkraftykreations3677]

Without the lines they are both very pretty. I would have poured them in layers also, in fact I have a bookend mold going that is probably going to do that same thing 😢! It’s been a few days. Thanks for the lesson learned!

[@glitznglitterbymichelle1]

Next time I’m doing it in one pour! 🥴

[@kdscraftcorner]

Sad it didn't work out. I think I would have voted Michelle. The slight glitter and rocks made it for me. I'll figure out another challenge. If I wasn't afraid it might not get here in time I would order you the cheshire cat pumpkin. 😁

[@glitznglitterbymichelle1]

😁😁

[@reginacarpenter-brooks2266]

At least you tried❤

[@jennsnyder408]

Oh man that's a bummer guys... you both get As for your efforts 😁

[@glitznglitterbymichelle1]

Tell me about it 🥴😁

[@wolfgirl-bp9uz]

By the way my vote goes for his Mister Glitz inator like yours best hate autocorrect you both have a great day I'm looking forward to all of your competitions I've even watched several a couple of times

[@glitznglitterbymichelle1]

Awww thanks for watching! I’m glad you like them ☺️

[@SuzieQ-z6h]

i would love to see how you made those beautiful roses

[@glitznglitterbymichelle1]

They were mailed to me by a viewer! I’m not sure where she got them.

[@traceywhite2480]

Nice try you two,bless you still a enjoyable video 🎉🎉

[@glitznglitterbymichelle1]

Thank you 😁

[@EllenfromSanDiego]

I think the roses would have looked better in a large sphere or cube mold. The poor roses are squished and obstructed by the narrowness and lines of the molds you used. Aren't you supposed to pour the next layer when the previous layer has only partially cured, so you don't get the lines?

[@glitznglitterbymichelle1]

I agree I wish I had larger molds but I didn’t 🤦‍♀️ I wanted to pour when the layers were tacky but the timing was all wrong 🥴

[@sandrajimenez1026]

Yes it a tie 😂

[@janicepage2257]

It's a tie. Both had lines, but they both were nice.

[@kimclayton5814]

Maybe something came off the rose surface and settled at the top of the first layer leaving the line. Hmm

[@StephanieDwyer-t7y]

I really like the bag shape. I call this one a draw.

[@karenr4773]

Yep you can tell your a married couple

[@lauriebennett6257]

I love the little bag mold though! It would be really cute with some resin or plastic (or whatever) goldfish in it like you just picked them up from the pet store!😄

[@glitznglitterbymichelle1]

That was my plan till the roses showed up. I’ll be doing that since I have all the pieces to do it.

[@laurie-lionessnotaewe5902]

Love both glitters used! I’m not going to vote, either. I have to say that the greenery looked better than I thought it would, though.

[@beverlytinsley-minniefield2434]

I have heard that deep pour shouldn't go in the resin curer, so that may have caused the line.

[@glitznglitterbymichelle1]

I actually didn’t put it in there. I wanted to pour when the first layer was tacky but we missed the window 🤦‍♀️

[@beverlytinsley-minniefield2434]

@@glitznglitterbymichelle1 oh Wow, that is strange 🤔

[@irenerhynes6732]

Sorry guys, cant vote on this one. But you persevered and there's always a next time.😢

[@diangallo]

You win some…you lose some..and this time its a tie. 🥴

[@vonnie4781]

There can still be a winner! Why not? No, neither one is without flaws, but one has fewer flaws. Sorry, but I think Michelle took the best of the worst award. That did sound exactly right, but I’m not going to try and fix it. You know what I mean. Thanks for the entertainment!

[@kimclayton5814]

Call it a draw because of the lines. Resin does what resin wants..just like a spoiled child lol 😆

[@TrakeDon-m4t]

Oh Don. You will win because this Canadian claims you the God of Challenges!

[@glitznglitterbymichelle1]

😁

[@cindyorgill6619]

It's a tie. No winner

[@quietspacearts]

only pour layers if it still tacky, that way no lines show, draw on this

[@JrBurriss]

It's a tie for me. Sorry it didn't turn out so well. What went wrong? Just my 1 cent.

[@glitznglitterbymichelle1]

Next time I’m doing one pour, I think it will be ok and not flash cure with the deep pour resin.

[@leetteduran4580]

Welp i cant vote since they are both kinda yucky!! Hahaha! Sorry guys!

[@glitznglitterbymichelle1]

😁😁😁 completely agree!!

[@leetteduran4580]

@@glitznglitterbymichelle1 😂😂

[@mariverhagen8082]

The flowers are too close to the top

[@glitznglitterbymichelle1]

I agree it was the wrong choice of molds 🥴

[@lindao7887]

I think I may have heard somewhere (?) that an alcohol spray between pours may cause that line, (but I don't know if you did) I'm not sure though. They have flopped equally. Not picking a winner though - I feel the rose was a bit too big, maybe something a bit more delicate next time? But.......it is a joy watching the two of you compete together - thank you! 🫶

[@cherylabrams7590]

🙂🙃🫠❤ oh well you gotta have your mistakes too learn from God-bless yall have a great day