#260

People say that the use of tools is the most significant difference between Humans and animals. This is why I will show you 8 tools I consider most important for our electronics hobby. And I will discuss the choices to make, where you can save your money and where it is wise to spend a little more.
I will cover:
• Power Supply
• Pliers and strippers
• Soldering
• Hot air
• Microscopes
• Multimeter
• Oscilloscope
• 3D printer
Links:
Switching Power Supply: s.click.aliexpress.com/e/1OFGc6k
Breadboard: s.click.aliexpress.com/e/chYjtrmg
Cheap pliers: s.click.aliexpress.com/e/b7t7l8g0
Stripper 30AWG: s.click.aliexpress.com/e/bTMFUdcy
Cheap USB soldering iron: s.click.aliexpress.com/e/bdNtv4ys
AOYUE 968A+: s.click.aliexpress.com/e/b9wR4PHI
TS80: bit.ly/2JUphIz
TS100: bit.ly/2sT8cXh
USB QC 3.0 charger bit.ly/2HB9iQC
Solder wire Kester: amzn.to/2Oc6A5m
Solder wire holder bit.ly/2FMYSdJ
Solder Flux: amzn.to/2TDwVPH
Solid Flux: s.click.aliexpress.com/e/c6yx0GAG
SMD Transistor assortment: s.click.aliexpress.com/e/bK1vfVdq
Hakko tweezers: amzn.to/2UHD0qO
Quick 8610W Hot air station: s.click.aliexpress.com/e/c2kEhvY8
Viewer proposed Hot air: s.click.aliexpress.com/e/LfwSgnq
Binocular Microscope: s.click.aliexpress.com/e/bi2c9KvE
Bench multimeter UT804: s.click.aliexpress.com/e/xMbMrDQ
Portable multimeter UT171D: s.click.aliexpress.com/e/cTVwqp48
Fluke 17B+: s.click.aliexpress.com/e/eF4jXRi
Transistor tester: www.aliexpress.com/item/Mega3...
Case for transistor tester: www.thingiverse.com/thing:169...
Siglent oscilloscope: amzn.to/2T9EWa2
Keysight oscilloscope: amzn.to/2O5cvsE
Rigol oscilloscope: amzn.to/2T9gaXt
Logic Analyzer: s.click.aliexpress.com/e/PdnNgKU
USB isolator ADUM4160: s.click.aliexpress.com/e/_Dew...
Supporting Material and Blog Page: www.sensorsiot.org
GitHub: www.github.com/sensorsiot
My Patreon Page: / andreasspiess
Alternative: flattr.com/@andreasspiess
My Bitcoin address: 19FSmqbBzb5zsYB1d8Bq4KbxVmezToDNTV
If you want to support the channel, please use the links below to start your shopping. No additional charges for you, but I get a commission (of your purchases the next 24 hours) to buy new stuff for the channel
For Banggood bit.ly/2jAQEf4
For AliExpress: bit.ly/2B0yTLL
For ebay.com: ebay.to/2DuYXBp
profile.php?...
/ spiessa
www.instructables.com/member/...
Please do not try to Email me or invite me on LinkedIn. These communication channels are reserved for my primary job

[@CTCTraining1]

Brilliant video ... I especially liked the comment on keeping your wife happy printing broken parts on the 3D printer. At present my wife is still whole but it sounds like a good precaution as we are all getting older!

[@andrewkieran8942]

@Chris Clarke , I tried this to justify buying a 3D printer but my wife insisted on a titanium replacement for her knee.

[@AndreasSpiess]

:-))

[@michaels3003]

@@andrewkieran8942 , you may need a titanium printer... 😀

[@iNowHateAtSigns]

As a technician who troubleshoots and repairs circuits daily, I agree with everything you said. This is an excellent resource for beginners. Proper bench oscilloscope, digital auto-ranging multimeter, and FLUX FLUX FLUX. I have one of those hot air guns with motor in handle. It works good but it's bulky.

[@AndreasSpiess]

Thank you for sharing your experience!

[@tomaszbrzeczyszczykiewicz4082]

Andreas, i would sell my soul to have a grandfather like You... really...

[@mt-qc2qh]

Nice comment, actually I had a grandfather like Andreas. I miss him for all the same reasons.

[@AndreasSpiess]

Thank you! These new technologies make it possible to share a person like me (or at least parts of me). A good compromise, I think.

[@khashmeshab]

The snort! ;-)

[@florianrecktenwald548]

True

[@777wsu]

Herr Spiess, you are part of my Sunday morning routine! Thank you!

[@AndreasSpiess]

Glad to read that!

[@mingjieli8138]

Finally, a good reason to buy a 3D printer.

[@typingcat]

It emits harmful particles.

[@erikpeterson1989]

Great summary Andreas - thanks for the benefit of your experience and judgement!

[@AndreasSpiess]

You are welcome!

[@tonysfun]

Great suggestions again Andreas! My problem in sorting stuff is way too many projects. But I learned from you to finish the older projects first before starting a new one. Thank you for all of your videos, I always learn something new from you! Stay safe my friend!

[@AndreasSpiess]

I recently bought more boxes. Also to store finished projects from the channel. So finishing in my case does not always help ;-)

[@tonysfun]

@@AndreasSpiess Yes, I have so many of my projects done and they are taking space. I think I need to start giving stuff away! Let someone else take care of it for a while, before they give it away!

[@N7801Z]

Again, you have produced a video that is valuable to me. Thank you, sir.

[@AndreasSpiess]

You are welcome!

[@WacKEDmaN]

some great information there yet again Andreas!..thanks mate!...LOL at nerds coitus interruptus!

[@AndreasSpiess]

You are welcome!

[@gregreynolds5686]

Breadboards from the 1980s were much better than they are today. As a boy I had some yellow ones, can't remember the brand, but they were miles better than anything I've managed to buy recently.

[@AndreasSpiess]

I agree. Maybe you get better ones today too for the professional market. But they are probably more expensive.

[@petersegner5884]

Once more a lot of great inspirations ! Thanks Andreas. Now you know why my lab looks so similar to yours. Thanks for all these usefull recommendations .. and the fun on Sunday morning. Brilliant !

[@AndreasSpiess]

Good choice to make look your lab similar ;-)

[@stewartrv]

Great for beginners, I wish I had this info a few years back when I was starting out stocking my lab, I think I made many of the same mistakes till as everybody else till I got the good stuff! Going straight to getting the good stuff saves money, time and frustration when starting out. Thanks very much!

[@AndreasSpiess]

You are welcome! Preventing wrong decisions is one goal of this channel.

[@WindRiderQc]

"This is called a... nerdz Coïtus Interuptus" This call made my day!

[@AndreasSpiess]

:-))

[@pe5erbarnes]

I used a PC fan for fume extraction too, but it has a piece of activated carbon filter (the sort you might use in a cooker extraction unit) in front of the fan. I can confirm this works very well, and a good quality PC fan has enough static pressure to pull air through the filter. Failing that there are cheap fume extractors available from china

[@AndreasSpiess]

Thanks for sharing your experience!

[@einars899]

Nice to see someone promoting SMD for us old farts. As long as yo have fair dexterity it is much easier to work with than trying to hit those friggin holes with a shaking hand! I try to avoid leaded parts except for breadboards where SMD parts does not fit.

[@AndreasSpiess]

You saw I also keep my old resistors for the breadboard!

[@danwhiffen9235]

Another great video and lots of useful links!! Thanks Andreas.

[@AndreasSpiess]

You are welcome!

[@avejst]

Very good Walk through 😀 Thanks for sharing 😀👍

[@AndreasSpiess]

You are welcome!

[@laurieinjapan]

Thank you for all your helpful videos! I'm just getting started in electronics and your channel really is very helpful. I'm excited to start making things!

[@AndreasSpiess]

Cool. Enjoy your hobby!

[@noweare1]

When I worked as an Engineer the only component I couldnt solder was bga parts. Good video Andreas.

[@meinsda5983]

I can't wait to watch your Video every Sunday morning!

[@AndreasSpiess]

Thank you!

[@karsnoordhuis4351]

I spend the €19,99 on a pair of those knipex pliers (and 1 resistor so i got free shipping), i can highly reccomend them. They feel really nice and will last you a life time. I also bought one of those automatic wirestrippers and im very happy with it. Can reccomend! O and if you dont have the budget for a bench oscilloscope, look for a used hp one. We have multiple oscilloscopes at school but i find the hp 5xxxx series the nicest to work with.

[@AndreasSpiess]

I hope you will find a decent scope!

[@doggo7567]

"and 1 resistor so i got free shipping" lol

[@AThreeDogNight]

Thank you for all of this, that's a big help.

[@AndreasSpiess]

You are welcome!

[@sethrd999]

great circle back on a super important topic, 'Ones Tools'. as always great overview of how to do it right for new players, the quick hot air station is on my wanted list, but as for most of the other things shown here, it is very much identical. Keep up the great video's

[@AndreasSpiess]

The Quick is not cheap. I also had to wait until my old station was dead.

[@jackdaniels7913]

I really appreciate your time and work with us in mind! Thank you and 🥃cheers🍻

[@AndreasSpiess]

You are welcome!

[@williammobbs3502]

Hi Andreas. I found your video on microscopes most helpful and informative as I am currently in the process researching and buying a stereo microscopes and camera . Thank you for the video, which will assist me in making the correct choices before I commit to my purchase. Good work Andreas.

[@AndreasSpiess]

Glad it was helpful!

[@AllanKobelansky]

All very useful recommendations. And another great tutorial.

[@AndreasSpiess]

Thank you!

[@NivagSwerdna]

This is a great video and very much mirrors my own experience (and old eyes)!

[@AndreasSpiess]

If the rest is still ok we have a good life ;-)

[@athanasiosstefanopoulos5211]

Another awesome video from the Swiss guy! Bravo!

[@AndreasSpiess]

Thank you!

[@wingunder]

Hi Andreas, This was one of your most informative videos that I ever watched. Great stuff! I think there's a huge need for makers for this kind of information, as we waste loads of time and money by using and buying the non proven or rubbish equipment. Greetings wingunder

[@AndreasSpiess]

Thank you! As I mentioned, I also spent a few dollars for not so good stuff ;-)

[@weststarr2046]

Marvelous vid my friend... that one is very,very wellcome... A MUST to see. THANKS a lot for ya work!!

[@AndreasSpiess]

You are welcome!

[@19trwind82]

I bought myself a digital USB microscope recently. To me it's great. Yes, you can't do soldering underneath, but I use it to check the quality of my smd solder afterwards. And for that it's fine. It's also small and cheaper than the stereo microscope. Anyway, thanks for another interesting and useful video!

[@AndreasSpiess]

Thank you for sharing your experience!

[@jannaconda1983]

nice. i just restarted to regain 'the love for electronics" and planning to create my own electroninc ' playgarden' in my basement in the future. this viedeo will help me to know what i need and save money

[@AndreasSpiess]

Enjoy!

[@brunosolothurnmann9205]

Thank you, I could again learn a lot of very useful tools.

[@AndreasSpiess]

You are welcome!

[@Who5tealmynamE]

Its funny to hear you use language in more creative ways, your descriptions are way more accurate than what I usually hear.

[@AndreasSpiess]

Thank you. I try my best with the English language...

[@mdijkens]

After trying all kinds of cheap breadboards, I ended up with reichelt steckboard SB-# series. They're a bit more expensive but never more all the frustrations of bad contacts, capacitance, bending wires etc. Really recommended !

[@AndreasSpiess]

Thanks for the tip. I will try one.

[@mt-qc2qh]

Great video, and you're right with the need for magnification as we age. I recently bought 10x head magnifying glasses from Ali for $13. One of my best adds this year. Very light and portable as I move around my workspace. A lot cheaper and more flexible than a microscope.

[@roidroid]

oh good! i'd been worried they might have been useless, so always put off purchasing them, but it's good to hear that they are indeed effective.

[@AndreasSpiess]

Thank you for sharing your experience!

[@SpaghettiEnterprises]

Link?

[@HarshDethe]

Very helpful, thanks for all the information.

[@AndreasSpiess]

You are welcome!

[@johnacsyen]

Thanks for the tips. I will get some of your recommendations

[@AndreasSpiess]

You are welcome!

[@georgelewisray]

World class maker tool tips with links to much more detailed information in previous videos. Most Wonderful !

[@AndreasSpiess]

Thank you!

[@WayneTheSeine]

Fantastic information and, as always, very well presented.

[@AndreasSpiess]

Thank you!

[@marco4570]

Knipex "Heavy Duty Pliers". So precise, they work for fine stranded wires as well as 2mm spring steel. Easily the best tool investment I've ever done.

[@AndreasSpiess]

Good to know. Thanks!

[@r1273m]

Very interesting video, especially the section on new 'scopes. I am still using my old Hitachi VC-6023 dual beam scope, must be about 30 years old now but still going!

[@AndreasSpiess]

I also have an old scope which still works. But the new ones have a lot of storage which is a game changer

[@bardenegri21]

A good next step would be an electronic load as well, especially if you're doing battery stuff. Great video, I saw all the stuff I use day to day in your video, can attest they are great suggestions.

[@AndreasSpiess]

I had to shorten the list. However I did videos about electronic loads

[@TheRanseyer]

Thank you very much. One of your videos i like most of all... Have a nice time !

[@AndreasSpiess]

Nice to know! Thank you.

[@mispeaced]

Thanks man, brilliant as always

[@AndreasSpiess]

:-)

[@Direkin]

For hot air I've got one of those integrated portable types (not like the one you show in the video). It's pretty neat, and heats up fast as well.

[@Kyle-ye4nj]

Mind if I ask the model? Just to get an idea.

[@Direkin]

It's a Yihua 8858-I, so similar to the pic in the video, just an extra 'I'. Has the controls all built into the handle rather than having a docking station.

[@marcodegier6298]

@@Direkin I have a GONGJUE 8018LCD, bought from Banggood. Don't recommend it because the turning wheel to control the temp is very inconsistent so makes it very hard to set the right temperature. When you turn it is does nothing and then suddenly it goes high up and such.

[@moth.monster]

A spool of some leaded Kester solder is the perfect thing to give to anyone who wants to start learning how to solder.

[@Cptnbond]

There is a few YT videos on breadboards and indeed some really bad versions exist out there. I watched and decided to go with Jameco Valuepro (WBU-202-R, 803 points). It's more expensive but well worth the money since I have never had any issue with it. Does it matter, well not if you only make few connections but as the number of connection goes up you will increase the risk of various intermittent connection issues.

[@AndreasSpiess]

Thank you for sharing!

[@viniciusnoyoutube]

Very useful video. Thanks!

[@AndreasSpiess]

:-)

[@cleberam]

Another great video, thank you!

[@AndreasSpiess]

You are welcome!

[@norm1124]

Vielen Dank für die Videos. Der investierte Aufwand ist sehr beeindruckend, diese Informationsdichte fällt ja nicht vom Himmel.

[@AndreasSpiess]

Beim heutigen Video war der Aufwand noch viel grösser. Es war ein spannendes Thema (für mich).

[@t540985]

As always enjoying greatly your videos :)

[@AndreasSpiess]

Thank you!

Such interesting content! Thanks for sharing with us!

[@AndreasSpiess]

You are welcome!

[@non7sens]

I bought the Japanese crimping tool after seeing your video review about it. Thanks!

[@AndreasSpiess]

:-)

[@DO7DH]

Very helpful summary.

[@AndreasSpiess]

Thank you!

[@paulmulvey286]

My prescription reading glasses is 1.5 (with some astigmatism). I ordered bi-focals from Zenni and bumped up the lower part to 3 for component work. I also use bluetack to hold in components while soldering. My extractor is Dyson, just need to watch small components.

[@AndreasSpiess]

Thank you for sharing your experience.

[@tobikellner8708]

Grüezi! Very useful videos (not just this one but all of yours!) Thanks from a guy in Freiburg, not too far from you (probably)!

[@AndreasSpiess]

Thank you! Basel is not far, you are right!

[@Heisenberg2097]

Swiss precision... as usual. THUMBS UP³

[@AndreasSpiess]

Thank you!

[@JuanDavid-yv4ot]

I had the same problem with cheap breadboards, until I found the Elegoo breadboards they are better. Thank you for the incredible quality of your videos.

[@AndreasSpiess]

Thank you for your info. Unfortunately, they are no more available on amazon.de...

[@clainstyle7846]

Thank you so much for this video 😁

[@AndreasSpiess]

You are welcome!

[@milindkhurd]

You are awesome Sir - Thank you.

[@AndreasSpiess]

You are welcome!

[@user-mx5we1li2l]

very enjoyable to watch!

[@AndreasSpiess]

Glad you enjoyed it!

[@samuelschwager]

Very good recommendations! I just bought a mill so I'll see how that goes ;)

[@AndreasSpiess]

Enjoy. Put it in a place where it can get dirty ;-)

[@Herebuss]

Great video!

[@AndreasSpiess]

:-)

[@guatagel2454]

Thank you very much!

[@AndreasSpiess]

You are welcome!

[@jwrelectro]

I am in almost full agreement on everything you covered with one exception. At 2:18 you mentioned breadboards and stated they all are about the same, so go with the cheapest. Check Julian Ilett channel and see the huge difference between some breadboards. I have had both good and bad luck depending on the manufacture of the breadboard. I hope to finish a video on breadboards in the near future started it 2 years ago and then I have had fun health problems. I really enjoy your channel and you do very nice informative videos.

[@abcde-ji6md]

I just subscribed to your channel, you've got some nice videos. Hope you one day manage to finish the video on breadboards, but take care of your health first. P.S. Saw you mention the IMSAI 8080 as your first computer...ah, what a classic! I wish I still had mine.

[@jwrelectro]

@@abcde-ji6md Thank you for the kind comment. Yeah, I wish I still had my IMSAI 8080.

[@AndreasSpiess]

@jwrelectro Julian showed the differences, but did not show me how I can avoid it :-(

[@Mr.Leeroy]

there is no going back from t12 stm32 controllers for both soldering iron and hot air gun.

[@abhijitborah]

Thanks for the useful video.

[@AndreasSpiess]

You are welcome!

[@albertocity1]

I would rather recommend the Hantek 5102p as first scope for beginners. Really neat stuff for the price. I have one since July and it's wonderful. Nice video ;)

[@AndreasSpiess]

Looks nice!

[@tigercat3864]

Very nice! The only tool you forgot is the Panavise.

[@AndreasSpiess]

I did not cover most of my tools ;-)

[@Torsan1977]

Laughed out loud! :) Love you humour.

[@AndreasSpiess]

Thanks!

[@donaldklopper]

Wow dude... thank YOU!

[@AndreasSpiess]

You are welcome!

[@mahudson3547]

Excellent advice as always. NEVER buy cheap hand tools. All my favourite ones are over 40 years old and seemed very expensive when I bought them. Lindstrom pliers and cutters are my favourites

[@AndreasSpiess]

Sometimes it is hard to distinguish between "expensive" and "worth the money" when you purchase. After 40 years it is easier ;-)

[@TheChaps83]

Thanks for another great video ! In addition to your video for multimeters : something like an UNI-T UT139C is auto-range, cheap and you can disable auto-off. As it run on two AA cells, they last a while ! (perhaps other brands are on AA cells too)

[@AndreasSpiess]

I am not very good with battery operated devices without auto-off ;-)

[@TheChaps83]

@@AndreasSpiess A bench one is better for this utilization - for sure ! But for those who want to buy only one, perhaps this can help ;)

[@AkosLukacs42]

Hi Andreas, have you tried to to use a fume extractors replacement filter with the fan? Probably you can make / 3d print some enclosure to fit the fan and the filter.

[@AndreasSpiess]

A filter reduces the power of the fan and you have to put it closer to your working area. For me, it was not worthwhile.

[@BerndFelsche]

Good video. A tip for those with a bit more cash is ceramic-tipped tweezers. I have a lazy eye so don't have full binocular vision. Don't ask how I can solder... It takes a few goes to find range before I can confidently work through a series of joints. I use a large magnifying glass for small bits... To augment the spectacles that I have been wearing since the age of 2. For people working with serial protocols, the buspirate has a lot of fans. It's cheap enough and is smarter than your average logic breakout. P.S. flux is also available in gel form. Consistency something like honey but not so sticky.

[@AndreasSpiess]

I tried once such ceramic tweezers and was not happy. Maybe you have a better one. And you are right with the flux. I sometimes also use it instead of the fluid one.

[@ajaybnl]

Very Good Info. Thanks.

[@AndreasSpiess]

You are welcome!

[@_a.z]

Glasses with a very high strength of 5+ are very useful to the older of us!

[@AndreasSpiess]

I never tried that.

[@_a.z]

@@AndreasSpiess Definitely worth having, on eBay they are about €5 Essential for close up work and much better than strength 2 glasses etc.

[@franklang.5202]

Tolles Video!

[@AndreasSpiess]

Danke!

[@DatMilu2K]

0:58 Who doesnt like some strippers when doing electronics work? :D

[@AndreasSpiess]

:-))

[@vasili1207]

Get expensive 😁

[@kjur18]

I used to use a big 120mm computer fan with some carbon sponge filter thingy glued to it. I used this until this fan gave his last spin. As this sponge is very conductive (and a bit brittle), I cut it to smaller pieces and used these to store some DIP logic IC's. Now I have to buy it again.

[@AndreasSpiess]

Reusage becomes more and more important! I am not sure I will add filtering as the fan is now very strong and it needs not to be very close to my work.

[@kjur18]

@@AndreasSpiess This sponge is not very thick, as it's about 2$ on AliExpress I think you might try it (mine is quite coarse, it won't block air very much, i think) . If it won't be to your liking you can always use it for esd protection, a small dip16 sized piece of it has around 1MOhm from side to side. Only downside is that cutting this makes a lot of mess.

[@r3v0l98]

You forgot an important one: your cute little hand indicator! :)

[@AndreasSpiess]

True ;-)

[@kadirozdinc6065]

I have owned for 5 months hot air gun you mentioned in the video. I think it is temperature-adjustable and affordable for most of the users who dont engage in very delicite curcuit But I never tried how precise temperature it has. In a nutshell it is worth the purchase.

[@AndreasSpiess]

I also do not know the exact temperature, but I think it does not matter too much as I usually work with higher temperatures and stop if I reached the effect.

[@PhG1961]

Wonderfull Sunday morning entertainment. I really like your lab with all the equipment and tools. That is my natural habitat too.

[@AndreasSpiess]

I hope yours is now finished?

[@PhG1961]

@@AndreasSpiess Working on the interiour. I left it aside for a while, since my father passed away and we're now taking care of more urgent things. This summer everything should be ready....

[@AndreasSpiess]

I am sad to read your father passed away.

[@PhG1961]

@@AndreasSpiess Thank you !

[@kwazar6725]

Sali Andreas. Another super overview of your toolset. I went from weller ws50 to a ts100 as well. Will look at the logic analyzer. We all benefit from your experience.

[@AndreasSpiess]

The TS100 is very similar to the TS80, only cheaper ;-)

[@kwazar6725]

@@AndreasSpiess I recommend the rigol 1054z its not perfect but classic 100mhz 4ch once tweaked. Next buy for me is hot air station quick dw

[@AndreasSpiess]

Thanks for your tip. I did not want to recommend oscilloscopes as I do not know them.

[@novachip_tecnologia]

I like your style! Nice gloves!

[@AndreasSpiess]

Thank you!

[@StuartJ]

I really like those "expensive" automatic wire-strippers. I use mine all the time. If you do anything with your PC, USB isolation adaptors are important. Be aware, the cheap ones are slow, and not good for Logic Analyzers. Hopefully the USB3 optical cables will become affordable in time.

[@AndreasSpiess]

P already have a 60$ Knippex and a 15$ Jokari sitting in the lab. Waiting for a few others from China...

[@googacct]

One word of warning regarding the smd books. I bought my books about 10 years ago and recently the glued on paper labels started to fall off. The easy fix is to use transparent packing tape to overlay the labels. In general, I have found printed labels wrapped with a layer of clear packing tape a good option for a lot of wire labeling tasks.

[@AndreasSpiess]

Thanks for sharing your experience!

[@DrGreenGiant]

Awesome video mate, thank you Can you recommend a good storage box for axial resistors like the one you had in this video, please? I've been struggling to find one

[@AndreasSpiess]

I use a bunch of those: bit.ly/2u5C16c . Not cheap if you need many :-(

[@aliens1192]

Very interesting! Besten Dank! :)

[@AndreasSpiess]

Gern geschehen!

[@recowabunga7200]

this video was indeed useful

[@AndreasSpiess]

Thank you!

[@nicoladellino8124]

Nice video, TNX

[@AndreasSpiess]

You are welcome!

[@johannapfelburg6286]

2:20 Speaking from experience, my father bought me a electronics set a couple years ago that came with a breadboard. Fast forward to my first year in Polytechnic (equivalent to college), the breadboards that the School of EE Engineering sold had terrible tolerances in their plastic injection molding, so often wires that are stuck would be there forever and never come out.

[@AndreasSpiess]

Bad luck for them. They should have better material, I think...

[@47mattie47]

@Andreas, having watched Episode 72 (making the invisible visible), along with the follow ups from it, did you make any more beyond episode 82 ? Was a thoroughly interesting series of videos to watch! :)

[@AndreasSpiess]

No, not yet :-(

[@namenameson8353]

i took some of this advice. thanks

[@AndreasSpiess]

You are welcome!

[@christianrehbein7132]

I have a recommendation for the use of USB oscilloscope. For a galvanic decoupling you can buy for about 10$ a ADUM2160 USB decoupler. Since i have one, i have no worries to connect my pc to the scope.

[@AndreasSpiess]

You are right. I think I mentioned it also in this video.

[@laverdanick]

How essential a binocular microscope is, depends on what you are doing. I would say that an illuminated bench magnifier is essential, certainly for those of us with ageing eyesight. I have been working with electronics for 50 years and while have access to a bench microscope at work, it is something I seldom use, most of the time a bench magnifier is adequate and a far cheaper purchase. The new cheap multimeters are very accurate and extremely good value compared with the old analogue instruments I started with. However, a Fluke will last you forever and is significantly faster at auto ranging and continuity beep. My 70 series was issued to me at work in the late 80’s and is still going strong. I recently added a newer Fluke 83V, bought second hand, because I wanted a back lit display. The cheap units only switch the backlight on for about 15 seconds, which is a right pain. A second hand Fluke can be bought at a significant saving from new. Yes my Fluke will go to sleep, but I have never felt the need for a bench multimeter. I agree wholeheartedly with you about using lead solder. We have lead free at work and it is much harder to use for reworking. Thank you for taking the time to make your videos, they are always well scripted and produced. A very small point, the instruments you were holding up are called ‘cutters’ in English. Small electronics pliers are for holding only.

[@AndreasSpiess]

Thank you for sharing your experience. Of course, we do not need to agree. This is the value of having such good viewers on this channel. Often you can learn more by reading the comments than in the video itself ;-)

[@syber-space]

I have to say I agree that a binocular is less helpful, but for me it is due to my glasses. It is very hard to find binoculars with stigmatism correction, and without it I cannot judge the squareness or distance of parts very well. I have found display microscopes and large magnifying lenses work far better for me as I can keep my glasses on.

[@stevec5000]

I used a binocular microscope like the for a while, until it fell over and broke, then I got an HD camera setup with a zoom close up lens that displays the image on a 24" monitor similar to the ones Dave Jones has and I like that much better.

[@AndreasSpiess]

Thanks for your feedback!

[@Jindraxx20]

Andreas, great video !! I love the guy with the swish accent !! :D

[@AndreasSpiess]

:-)

[@shenqiangshou]

Hey I'm not doing too bad, haha, all I need now is a bench PSU and an digital scope to complete my personal lab. Everything else I pretty much agree with you spot on. Didn't know the TS100 is _that_ good though... might have to look at one day...Oh PS, you forgot to mention digital calipers. I don't think I can go a day without my calipers. I just have a cheapy Chinese one, seems to work well enough.

[@AndreasSpiess]

I had to reduce the list. But I agree on calipers (I even own one for left-handers)