#287

Рет қаралды 20,150

3 ай бұрын

[Builder's view] Fujimi1/24 Isuzu Piazza (Impulse) is in progress.
Combining the body and chassis, I'll reassemble the suspension components to match the preliminary assembly, craft and install custom emblems, and it'll be complete. You can look forward to seeing the finished photos in the upcoming 'Full Build' video. Stay tuned!
I will make tweets such as the announcement of the start of the live broadcast on X(Twitter)
/ nandemo_seisaku
Various photos are published irregularly on Instagram.
Instagram / nandemo_plamo
Web site nandemo-seisaku.com
The photos of the finished product are summarized here plamodel.info
Facebook page / nandemoseisaku
Contact　info@nandemo-seisaku.com
#scalemodel

Пікірлер: 88

@Bryan-cs9to 3 ай бұрын

Stunning work as always!

@kenji-plasticmodels 3 ай бұрын

Thanks!😊

@georgeclements2742 3 ай бұрын

Another superb build. Congratulations and thank you for the series. Best wishes.

@kenji-plasticmodels 3 ай бұрын

Thank you😊

@bobwil9903 3 ай бұрын

Always a pleasure to see you building!

@kenji-plasticmodels 3 ай бұрын

Thanks😊

@davidhinkson8856 3 ай бұрын

Excellent project that kept my attention from start to finish. You took a very basic kit and transformed it into a masterpiece! 🎉🎉🎉

@kenji-plasticmodels 3 ай бұрын

Thank you very much!✨😊

@brianmros4844 3 ай бұрын

Hi Kenji, bravo! it has been quite the journey on this one. I couldn't imagine that it would look this good from what you started with. Lots of hard work has paid off. The seatbelts lined up perfectly with the roof. I look forward to your new selection of car. Thank you for sharing, and have a great weekend.

@kenji-plasticmodels 3 ай бұрын

Hi Brian, thank you as always. It took a long time, but thanks to everyone's support, it was finally completed. The editing process is very difficult, so please wait for a while.😊✨

@user-pm9id5sh4v 3 ай бұрын

完成おめでとうございます次のキットを楽しみにしてます

@kenji-plasticmodels 3 ай бұрын

ありがとうございます😃

@KarlScaleModeling 3 ай бұрын

Awesome details Kenji 👍🏼 we always learn from your work so thanks for sharing with us all. Well done ☺️👍🏼

@kenji-plasticmodels 3 ай бұрын

Thank you!!

@rallyvintequatro 3 ай бұрын

One more excellente build! To watch and learn!

@kenji-plasticmodels 3 ай бұрын

Thank you!😊

@chrisshave2676 2 ай бұрын

Superb build your attention to detail is second to none well done

@kenji-plasticmodels 2 ай бұрын

Thanks😊

@pauloreissjunior4772 3 ай бұрын

Congratulations, excellent journey. I followed each of the videos. It's very rewarding to watch you work, we learned a lot from it. Thanks from Brazil.

@kenji-plasticmodels 3 ай бұрын

Thank you, I'm sure you watched a lot of videos😊✨

@berndhillert3585 2 ай бұрын

Ich habe mich sehr gefreut Ihnen bei der Arbeit zusehen zu drürfen. Vielen Dank

@kenji-plasticmodels 2 ай бұрын

Danke.😊

@gibby4444 3 ай бұрын

Thank you, Kenji. I learn so much from you.

@kenji-plasticmodels 3 ай бұрын

Thank you!

@robk5865 3 ай бұрын

Your models are always beautiful but this one is special. You took on a sketchy, sub par kit and made into a masterpiece here Kenji. Your choice to build it as a budget family car made the series even better. Have you considered a build series that isn't a car or bike? I dont think I am alone in my curiousity to see another layer of your modeling mastery. ✌️🇨🇦

@kenji-plasticmodels 3 ай бұрын

Thank you. Right now, all I can do is make the kits I have in stock. Possible items other than cars and motorcycles include Star Wars and Gundam. In any case, I'll make the decision myself, so don't tell me what you want.🙏😃

@user-rh4gp2nb7m 3 ай бұрын

最後まで丁寧にこさえてくださり本当にありがとうございました。毎回細かいところを見ながら40年前の記憶が蘇りました。大八車の様に細い165/82-13タイヤ+鉄チンホイールの赤いベラ、ストライプを黒一色に変えて見た目が締まった白のXSターボ、洒落たホイールカバーを外して黒アルミ剥き出して気に入ってたナス紺イルムシャー…。豪雨の中、突然ワイパーが止まったりスピードメーターが壊れたりとモロモロ不具合はありましたが人生で1番好きなクルマです。

@kenji-plasticmodels 3 ай бұрын

コメントを拝見し、あなたのことばが車への愛に溢れていることにとても感動しました本当にピアッツァがお好きなんですね。ありがとうございました。

@mrkekemayu 3 ай бұрын

最後まで息を止めて見入ってしましました。完成おめでとうございます！お疲れ様でした！次回作も楽しみです！ラリーカーとか見てみたいです。

@kenji-plasticmodels 3 ай бұрын

ありがとうございます😊、個別のリクエストには応えられないですが、偶然そうなることもあるかもしれませんね。

@Contraya 3 ай бұрын

Excelent work 🔥

@kenji-plasticmodels 3 ай бұрын

Thank you😊

@keefr22 3 ай бұрын

Another beautiful model car Kenjo, even better given the fairly horrible old kit that you started with, really excellent modelling again! Looking forward to the next build 🙂Keith

@kenji-plasticmodels 3 ай бұрын

Thank you!😊

@nightcrow6965 3 ай бұрын

お疲れ様です。ピアッツァ、ようやくの完成ですね。😊 おめでとうございます。🎉 しかし…エンブレムの作業なんか、動画で見てもナニやってるかわからないレベル😅 いすゞのマークが直線基調でホント良かったです。懐かしいミウラにもまたお目にかかることが出来て、楽しく視聴できました。個人的には初期型の117クーペが大好きだったので、最初にピアッツァ見たときは、なんじゃこりゃと子供心に思ったものですが、コレはコレで良いクルマですね。総集編、楽しみにしております。😊

@kenji-plasticmodels 3 ай бұрын

お疲れさまです。ありがとうございます、やっと完成です…😅 エンブレムはおっしゃるとおり直線基調だから出来たわけで、ややこしいのだったらアウトです。編集がんばります👍

@reneholstkristensen9429 3 ай бұрын

so amazing what you have done with this car i really looking forwward to see what is coming next . have a great weeken .😎.

@kenji-plasticmodels 3 ай бұрын

Thank you!!😊

@user-gq5lt2rj7w 3 ай бұрын

素晴らしい‼️です。

@kenji-plasticmodels 3 ай бұрын

ありがとうございます！😊

@ralfweber7562 3 ай бұрын

Absolutely beautiful!🙏

@kenji-plasticmodels 3 ай бұрын

Thank you😊

@allenshirley1077 3 ай бұрын

Very, very nice Kenji! The car's lines remind me of my first year Scirroco from the late '70s.

@kenji-plasticmodels 3 ай бұрын

Thank you. The first generation Scirocco was also designed by Giugiaro.😃

@user-no3xj9cg3g 3 ай бұрын

プラモデルの作業でこれをやったら間違いなくミスるのが『急ぐ』『力む』だと思ってますが Kenji様の行程にはそういった『ドボン要因()』が一切無いからこの完成度に辿りけるのが良く分かり素晴らしい限りですね。【まとめ】シリーズも心待ちにしております

@kenji-plasticmodels 3 ай бұрын

少しの失敗は許容するようにしてドボンを回避しています😂

@brunocostard936 3 ай бұрын

Not m’y favorite car but very very good job. It’s pleasure to Watch your vidéo.

@kenji-plasticmodels 3 ай бұрын

Thank you!😊

@daimor1544 3 ай бұрын

う～ん今回もやばい（←語彙力）完成披露楽しみに待ちます。こんなに綺麗なボディなのに、ぐいっと広げてパチンとはめるのがなんか不思議。ワイパーとかタイロッドをそのままとし、プラモっぽさを残したのが味があって面白いですな。

@kenji-plasticmodels 3 ай бұрын

ありがとうございます😊 ワイパーもそんなにひどくはなかったので使ってあげました😃タイロッドはまあ…見えにくいので😅

@Aces_Eights_Scale_Vision 3 ай бұрын

Turned out great Kenji. One of these days I’d like to see you do the Tamiya Toyota Supra #24123 in a similar manner as your 2000 GT-R custom. The hatch would be intriguing to see as to how you would go about it.

@kenji-plasticmodels 3 ай бұрын

Thank you, but as I've said elsewhere, I can't respond to requests (because so many people are watching, I can't respond to specific people's wishes) But I'll make the next one even more fun, so please check back.😊

@garyb6219 3 ай бұрын

So very nice!

@kenji-plasticmodels 3 ай бұрын

Thank you!

@user_eksz 3 ай бұрын

エンブレム工作、まるでドクターXみたいですね😄 キメ台詞はきっと....😁

@kenji-plasticmodels 3 ай бұрын

私、失敗は誤魔化すんで👍

@user-ir8rl7zr9z 3 ай бұрын

ピァッツア❣️完成おつかれさまでした～🤭🎶色が良いなあ🙂❣️

@kenji-plasticmodels 3 ай бұрын

ありがとうございます😊

@artmodeling1147 3 ай бұрын

完成、おめでとうございます＼(^o^)／

@kenji-plasticmodels 3 ай бұрын

ありがとうございます！😊

@christophevoisin6074 3 ай бұрын

Pas fan du modèle, mais cela n’enlève rien au magnifique travail réalisé 👍🏻👍🏻👍🏻

@kenji-plasticmodels 3 ай бұрын

merci!👍😊

@michaelbaykara2322 3 ай бұрын

Excellent as always Sensei, is a American muscle car next? 🤔

@kenji-plasticmodels 3 ай бұрын

Thank you!

@ibiza1gou 3 ай бұрын

わいは昔、このマヨネーズに乗ってました。メッチャいい車でした。ジウジアーロは天才や。

@user-sk3vc1fx7j 3 ай бұрын

In English this says something about eating mayonnaise lol

@kenji-plasticmodels 3 ай бұрын

@ibiza1gou　乗ってたんですね😊羨ましい👍

@kenji-plasticmodels 3 ай бұрын

@user-sk3vc1fx7j　 This car was called 'Mayonnaise' in Japan back then.

@davidparker2259 3 ай бұрын

Soooo, are you sending the Lamborghini to me? I see you took it out of its case, which must mean you don’t want it anymore, right? Let me know, and I’ll give you my address. Nice job once again, taking a poorly designed toy, and turning it into something you could proudly put on a contest table. 👍

@kenji-plasticmodels 3 ай бұрын

Thank you😊, but I can't send you a Lamborghini.🤣

@edmarmohr3611 3 ай бұрын

Que lindo 👏👏👍👍🚙🚙😄😄🇧🇷🇧🇷

@kenji-plasticmodels 3 ай бұрын

Obrigado!😊

@Jari1973 3 ай бұрын

👍

@hansvandermeer7635 3 ай бұрын

👏👏👏

@raularco2402 3 ай бұрын

Hello Kenji, congratulations on this excellent work. As always, I admire your way of working and the possibilities you offer to make improvements to your models. On the other hand, I make a request to you if it is possible for your next job. Could you make a model of an airplane, especially an F14 or similar, or a model of a combat tank. Thank you very much and greetings from Spain.

@kenji-plasticmodels 3 ай бұрын

Thank you. Requests are discouraged in this channel. As many people are viewing, I can't accommodate specific individual requests. I apologize for any inconvenience🙏

@raularco2402 3 ай бұрын

@@kenji-plasticmodels Hello Kenji, thank you very much for your response. I apologize for my request. Your reasoning is logical. I look forward to your new project.