£289 DIY Gutter vacuum

Рет қаралды 13,420

Күн бұрын

Пікірлер: 27

@joevilas5196 10 ай бұрын

Mate I appreciate all you do and this video has helped me massively I'm not a fan of ladders and I bought the same vac and poles. What I did do is get a camera system bought from amazon and attached it to the top end. Been a while since I last messaged you. My update is this I'm in full swing of my business pressure washing and gutter cleaning and even conservatory roof cleaning all thanks to you thanks again. 😊

@SMOUT_ 10 ай бұрын

That's amazing Joe, I'm glad it's going well 💪🏼 pressure washing season is upon us!

@thegadgetemporiumaustralia8509 Жыл бұрын

Got a solution for ya. I have a similar DIY gutter vac ive built here in australia. We also get some very thin gutter gaps with tiled roofs too. Go get some PVC pipe and a heat gun. Measure your gap and then make a variety of different attachments by heating the ends of the pvc pipe and making duckbills using grips or a vice. Thay way youll have a variety of duck bill attachments in the van ready for different sized gaps.

@ChrisAddis Жыл бұрын

Great idea with the hose. The best fixes are often the most cost effective ones.

@fensterputzernuernberg 2 жыл бұрын

Use an wet old cloth and a screw driver to get into that tight guttering mate !! a lot quicker... push it down into the gap and use the screw driver to move it where you want once the cloth is in there.. In fact a wet cloth is really great for pushing debri and cleaning along the gutters...

@SMOUT_ 2 жыл бұрын

Thanks for the tip!

@noahnixon541 Жыл бұрын

Cool... I'm about to start making my gutter vac... so appreciate your video... Not spending a grand on one when I can make one for a couple of hundred... Will be very good for getting into the channel at the back of a conservatory where it meets the house 😅

@leebryantravels 8 ай бұрын

Can be a bit awkward , ie if not much room behind you so you can't bring the pole back and getting the right angle but doable

@davidkearin3622 Жыл бұрын

Maybe try one of those radiator paintbrushes, the long ones with the angled head

@MadDogsandEnglishman 2 ай бұрын

I find my nozzle always gets blocked with larger pieces of moss. Pain in the backside when that happens. I'd like to use the larger size nozzle, but it won't fit in the gutters.

@ripvanwincle2258 Жыл бұрын

I had no idea gutter vacuum's were so useless thanks for showing mate.

@adornwindowcleaning7739 2 жыл бұрын

Hose cuff - screws on anti clockwise - will then fit in the screwfix vac

@SMOUT_ 2 жыл бұрын

I'll look into it thanks

@eamonnodonnell6659 Ай бұрын

Hi Mate great video and tips. Funny enough i've bought a Titan wet n dry but the smaller 1300 watt model. I dont do window or gutter cleaning but purchased it to clear water from a garage. Strangley enough i bought 3 metres of 40mm pipe and 2 adapators , in my wisdom i thought it might clean the gutters , it did, but not as brilliantly as your Titan. Would you mind confirming, is it 50mm pipe then 50mm tubes plus 50mm swan neck you used? What brand did you use as unfortunately i couldn't see the link. Many thanks, Eamonn

@leebryantravels 8 ай бұрын

There's more to gutter cleaning than yiu can think. Set up and pack up, cleaning the machine, access, over hang of tiles, putting up a camera or drone to survey and check how much debri and how thick debri is.

@robertleedham2157 2 жыл бұрын

great vac idea!

@stearswindowcleaning 21 күн бұрын

That’s to big of a over lap tiles hanging over have the gutters , need larger gutters ! There set back to far. Are those aircraft aluminum gutter poles or flag poles?