CMC Triggers 3.5lb flat - Install

[@mattdaniel2395]

Loved this video man. Very well done. Keep it up my friend

[@fernandonavarro2135]

Such a nice looking trigger! Love how happy you are with your new trigger only some people would understand haha

[@Planetone.]

Ive been shopping around and the ones i see advertised are 2.5lb i rather go w/ this 3.5lb trigger, trigger it self looks really nice, thanks for the great vid❤

[@HUNGUSind]

I recently purchased a complete DPMS LR308 lower from FIREARMS UNKNOWN” in Yuma, Arizona. attached a 24” 308 win upper and took it out for a test. The hammer strike was extremely light and the rifle would only shoot about 20% of the steel case rounds the first time through. It shot brass about 60% first time through. The lower came with a “BLITZKRIEG” trigger group. The hammer spring was extremely small and couldn’t be replaced with a fully grown spring. I installed a CMC 3.5lb trigger group and my rifle now eats EVERYTHING…steel as well as brass, without fail!

[@BearzG]

That trigger by BLITZKRIEG is trash. Weak springs and a ripoff. Bought one, wasted $120. They don't do returns so now it's sitting at the bottom of my unwanted bin of parts.

[@brianmgregory857]

Thank you Simple’s right to the point help me a lot on my drop in trigger. Listen to him people don’t take the hand grip completely off way easier his way

[@btw6060]

Just ordered one from palmetto state armory & super excited to install. You have any updates on it? A video with some shooting would be appreciated as well!

[@lostson562]

Great video & review I can’t wait to install my CMC Trigger it’s currently shipping to me at the moment. Hope you and yours are staying safe and healthy 🍻💯🙌🏽🔥👍🏽👍🏽 take care.

[@NefariousEnough]

With Hardened Arms, expect huge tolerances. Usually the anti-walk junk screws aren't needed. In this case, use them. Three and a half pound pull.

[@HuntsvilleHunter]

This is great insight…any thoughts on Palmetto State Armory uppers? I have two of those as well…Hardened arms went under…

[@NefariousEnough]

@@HuntsvilleHunter Palmetto State has really let things go. Unfortunately. They've become sort of a clearing house for blemished goods and parts that their manufacturers rejected. The business has grown so fast that QC went out a long time ago. I can only guess as to what their products are like today but if you wrote them, I'd guess they'd send you a bunch to review. Good luck!!

[@rxplusplates646]

Thanks for the video! I just purchased this trigger and ecited to use it at this weekend's Patriot Games. Mil-Spec trigger had to go.

[@HuntsvilleHunter]

Thx for watching!

[@misterx8592]

Ordered mine from JoeBob’s in Hays Kansas.

[@brandensoutdoorb-channel8084]

3.5 pound pull Your mag release is an AR-Maglock filed down. The screw heads are Torx

[@superior3870]

There on sale 99.99 right now PSA

[@DesertTactical]

Plan to pick one up soon!

[@marcosablan]

Awesome. Looking to replace the trigger on the SFAR. Yes it has a light pull already. How can i adjust that to make it lighter

[@Slashoom]

ty! Got the same one and can't wait to try it out.

[@amd6570]

That trigger guard is all I see 😵‍💫

[@georgeazar6879]

Thank you for posting this video as I’ve been really considering adding one of these in my M4

[@HuntsvilleHunter]

Thanks for watching!

[@Whiskey5_]

Thanks for the vid, I am sold!

[@toddr5732]

Nice job. I was looking at CMC triggers along with a PSA one. did you notice if your groups got better with that installed ?

[@HuntsvilleHunter]

Thanks for the kind words, You do have to “retrain” your finger on the ease of pull…it’s amazing and crisp. I believe I had a 6lb pull on the stock trigger and it was an adjustment.

[@peadookie]

Great video. Good, simple explanations!

[@HuntsvilleHunter]

Thanks for watching!

[@mattc6395]

Awesome video! I noticed that your trigger has the exact same amount of play as mine when the safety is engaged. At 10:00 you pull the trigger while the safety is on and there is a small amount of travel once you attempt to pull the trigger. Is this normal? My worry is that the small amount of travel when on safety will reduce the pull weight when it’s switched to fire mode. Meaning if it’s a 3.5 lb trigger but I press the trigger a bit while the safety is engaged it would then turn it into a 2.5 on trigger because there was that small amount of travel. When watching the installation video on the cmc channel, their trigger clicks and springs forward when pulling trigger with safety engaged. Mine is doing the same thing as yours. I called cmc and they didn’t have an answer. Said they would get back with me but I never heard back from them. Any input is greatly appreciated. Thanks!

[@HuntsvilleHunter]

Hey Matt, there will always be a pinch of travel while on safe, regardless of the manufacturer. Here’s why…look at the safety latch of any AR (which is mass produced by various manufacturers). Notice the notch in the middle of it that blocks the trigger from moving….its impossible to be “flush” where no movement would occur. Trigger companies get veeeeeeery close…but that’s the best they can do. Hope this helps.

[@mattc6395]

@@HuntsvilleHunter Thanks! I appreciate it

[@ecsauer]

Is there a reason you re-inserted the safety before adding the pins/screws to the trigger assembly?

[@HuntsvilleHunter]

It’s a videoing mistake…was trying to splice two vids into one…was hoping it would go unnoticed, but you guys are sharp ;)

[@pucho8888]

Appreciate the video!

[@chrisg9602]

Just put this trigger in my Ar thanks for this video were did you get the mag release button?

[@HuntsvilleHunter]

That mag release button is a modified CA compliant one that I dremeled to remove the CA BS mag lock bar….search for a CA compliant mag release button and you will find it…

[@carlitos_714]

I put two of these in both ar pistols. Let me tell you

[@brianbelliveau5551]

Hey if your busy your busy lol

[@petervu9773]

what happened to the maglock ?

[@michaelmcclendon7202]

Do not use red Loctite as it is semi-permanent.

[@gallagherw3]

What mag release is that?

[@HuntsvilleHunter]

Hey William, I want to say midwayusa.com but not 100%…thx for watching!

[@guerillaglue6969]

This is exactly what I’d expect a Cabela’s shoppers AR to look like😂😂 eBay special scope that’s on two different mounts and the pointless laser sticking out looking stupid as hell

[@HuntsvilleHunter]

Classic troll…the video is about a trigger but proceeds to ridicule me and what my budget allows…

[@guerillaglue6969]

@@HuntsvilleHunter “what my budget allows” dude maybe instead of dropping the money on a trigger that can shoot better than you, you should drop the money on some decent glass and decent parts that won’t crack like cast chinesium. Keep having your Fudd poor-man mentality but I guarantee you that you shoulda stuck with the mil-spec trigger that came in that lower. Also there really is no explanation for that scope mounting abomination.

[@warrior-in-christ5717]

HuntsvilleHunter - thanks for making this video. Ignore the idiots who feel the need to stoke their egos and make themselves appear better by tearing good people down. A perfect example of the decay currently destroying this country.

[@michaelbattin]

what a douce bag

[@bolriconyc3795]

DO NOT USE RED LOCTITE!!!!!.... MAYBE BLUE DEFINITELY PURPLE BUT DO NOT REACH FOR THE RED!!!

[@bertecrabtree]

Thanks for the vid!

[@HuntsvilleHunter]

Thanks for watching!