2GIG SMKT3-345: Go!Control Programming

[@Ryan.Willis]

Best install video on KZbin, thank you!

[@AlarmGrid]

Hey, thank you! We appreciate your comment. We're glad you found the video useful.

[@CraLoix]

In the video while programming the freeze dialer delay, you say you don't want a delay then select (1) enabled. Shouldn't the delay be disabled, or is the programming interface simply counterintuitive? Great video!

[@DarkDoge]

I don't have this panel, because my father would like the beep that goes off to be muted.

[@firealarmfan]

I have on installed at my vivnt security system and our 2gig smoke alarm is rebranded by apollo

[@fasttrackstormcenter]

Does the 24 hour auxiliary Alarm sound the same as the intrusion/Burglary alarm siren sound?

[@hampton-roads-bus-guy]

do you have to have a 2gig panel to use this smoke alarm or can you hardwire it into your previous smoke alarms?

[@freddaniels8259]

This type of smoke alarm operates off of batteries and will provide local sounding but it is typically the type you use with an alarm panel.

[@hampton-roads-bus-guy]

@@freddaniels8259 am i able to hardwire it into my existing smoke alarms?

[@alexandersalarms5380]

Can you do a tutorial on how to program a Honeywell 5817CB-3-Zone-Wireless-Commercial-Fire-Burg-Transmitter to it?

[@AlarmGrid]

2GIG doesn't list an equipment code for the 5817CB for either the 2GIG GC2/GC2e, or GC3/GC3e. It's also not listed in any of their compatibility documents. Given that information, I'm not sure I'd use the 5817CB with the 2GIG GC2.

[@alexandersalarms5380]

@@AlarmGrid ok. thank you.

[@alarm5582]

I have the same detector on my vista 20p.

[@glen4cindy]

Please help. I programmed my system as 2GIG Smoke detector, equipment code 1058, but it would only "learn" the RF Serial Number the first time when I programmed loop 1. I turned the base on and off like indicated in the video but it did not "learn" for the 2nd and 3rd zone for loop 2 and loop 3 although it didn't give me any errors when I programmed or rebooted the system after programming. Is everything OK? Thanks.

[@glen4cindy]

Frank Longo Thanks. I did manually enroll, I just have not completed the system test yet. Thanks for your input.

[@angelrivera4233]

como consigo la voice transcriptor sheet

[@CollinEichinger0221]

Does the smkt3 also have only one time usage like the Honeywell?

[@AlarmGrid]

Honeywell smoke detectors aren't one-time use. Who told you that? They may be confused with the fact that most mechanical heat detectors (used in wireless smoke/heat detectors for the Fixed Heat detector portion of the sensor) are one-time use devices. I've never heard of a one time use smoke detector though.

[@CollinEichinger0221]

+Alarm Grid Okay thank you very much!

[@shannongreenwell1278]

We have this smoke detector in our house.

[@CyberX48583]

Thoose were at my vivint security system

[@andino2003]

Work vista 21ip?

[@AlarmGrid]

No, I'm sorry, the only Honeywell/Resideo panel that currently supports the 2GIG 345 MHz sensors is the Lyric Controller. The Lyric should be on the latest version of Firmware (currently MR9).

[@dennisgarcia2598]

Hi! i wish anyone can point where i an buy security device?

[@AlarmGrid]

Try AlarmGrid.com

[@YM-Lost]

no