2JZGTE IS300 SINGLE TURBO CONVERSION!

[@cshevlin]

Nice work! Definitely on my list of things to do to my GS swap.

[@twinturbotezza4255]

Christopher Shevlin thanks man! Yeah I have a buddy with an aristo swapped GS, his single turbo conversion wasn’t a fun time either lol

[@cshevlin]

TwinTurboTezza definitely not looking forward to it but like you said take your time and do it right.

[@Darkeclipselm]

Link to the turbo and manifold?

[@OhToeKnee]

did u have to do anything to the maf? and were u running a boost controller

[@2jsanc681]

Took my twins off when my engine was out. Wasn't exactly fun. Crazy cant imagine doing it when the engine in.

[@davidaames8787]

What kit is this ? Did you upgrade your fuel pump ?

[@julioc9873]

Nice video brother , what engine harness and ecu did you use ?

[@awniyounis7667]

Nice work man! Are there any issues running this setup with a stock ECU?

[@camaro92026]

Lol ya good point they don't work well with the stock ecu

[@presidentttt]

What engine mounts and brackets did you use?

[@jimboslice708]

The twins fit without moving the abs? And did you have to cut the heater core a inch from the fire wall?

[@twinturbotezza4255]

Jimmy Chansiri yep just pulled it over a bit, and yep I chopped the heater core

[@jimboslice708]

@@twinturbotezza4255🤔 the whole time I thought you have to relocate the abs. That's why my car been sitting on blocks for almost a year. Should've did a video of the abs relocation. That wouldve helped me out a lot

[@twinturbotezza4255]

Jimmy Chansiri yeah people say that to scare you because of the heat and the brake lines, but mine were fine honestly. And yeah I would have but I had a buddy help me, it’s a bit intensive if you’ve never done it, compression fittings and bending the lines, all that stuff

[@banditpicasso]

Yo what’s the music in the video, it’s groovy AF.

[@kathleenmahaxy2505]

dang how u do dat

[@socrules71]

Hey bud, when you used the stock turbos, what down pipe did you use?

[@twinturbotezza4255]

angel alarcon custom from the flange cutoff my swap came with

[@socrules71]

TwinTurboTezza thanks for the reply bro, and well hopefully mine has something there haha!

[@javi2jzforged]

Ecu and injectors oem ? Thanks

[@twinturbotezza4255]

Javi .bmw2jz yes. Eventually I upgraded to standalone and 1000cc injectors though.

[@ametune3645]

Did that engine come with a manual hardness Or did you use the one from your manual car ?

[@twinturbotezza4255]

AME tune my car was oem automatic. I used the automatic aristo harness.

[@ametune3645]

TwinTurboTezza oh shit so by any chance how would I do it if u have a manual oem harness

[@ametune3645]

TwinTurboTezza would it still work or would I have to do some harness work?

[@twinturbotezza4255]

AME tune if you have a manual harness it would work just the same

[@ametune3645]

TwinTurboTezza what about the transmission will it work the same , even if it’s not the 154

[@TXkIs-wg7nb]

When you gone help out with my swap lol

[@twinturbotezza4255]

TX2k Is300 just let me know when lmao I’ll swing by and have a look at it

[@josiahzurita725]

buns

[@jimboslice708]

What piping did you use for the intercooler?

[@twinturbotezza4255]

Jimmy Chansiri there’s a trick you can use with the twin turbo charge piping. Dm me on IG and I can explain, it’s kind of complicated

[@lude414]

Interested as well, not tryna buy new piping.