2x 12' Starsound subs on a SD8k

This is my new set up which consists of:
2x 12' Starsound 7312
1x SD 8000
2x 75amp batteries
1x starsound hazard series 4 channel
4x pioneer pro series 6.5' mids
A Terminator preamp
And more to come

[@marsalingounden2535]

Howzit bud. It sounds great. Well done. Did you use a line out converter for the head unit? If so, how many channel converter did you use?

[@christianackerman2129]

Very nice flex 👌🏻👌🏻

[@Sohailmsh]

Thank you man. have a look at the most recent video and there is more to come this weekend

[@tiwongeguynyirenda4932]

Nice

[@saadiamohamed5939]

Awesomeeeee🔥🔥🔥🔥🔥

[@stevenbekker3416]

Is that port noise I'm hearing or something knocking

[@southafricasbassbassheadz2356]

Good 1 bro I like this set up with the stock head unit still great set up overall just needs some tubing and some zip ties 💯👍and where can I purchase this amplifier

[@selvannaidoo3860]

Hi, is that startsound monsters ?

[@breytonaucamp2062]

If i may ask would u recommend to other people to buy startsound subs becuase i want to buy two startsund subs for me but some people say that starsound is not good. But i had two 6000watts starsound subs and they played nice. So now i want to buy agian startsound but just bigger watts. So can u tell me how are the starsound subs for u.

[@ThristanMinnaar]

Starsound subs is one of the best it never want other subs till my amp im runing is a 20k b3 starsound amp with the grey cone 3400 dvc subs

[@djchips1744]

Did you upgrade your alternator?

[@Sohailmsh]

No still stock alternator

[@djchips1744]

@@Sohailmsh stock as in 90amp alternator with 3 bats. Living life on the edge. Any isloator installed?

[@Sohailmsh]

@@djchips1744 no stock is 120amp

[@djchips1744]

@Sohail Hoosen mooi. Do you use an isolator on the main battery, perhaps ? I want to run an extra battery on the mono and separate the main battery from the boot. But your system on another level bra.

[@Sohailmsh]

@dj chips add me on whatsapp we can chat there 071 879 1231

[@jesperkylmaoja6853]

Can you link the gain chanher thing

[@mekyle9010]

Hey bud, would you say the 4 pro mids was enough to compliment your bass ? Even when bass was fully open

[@Sohailmsh]

Hey man yea it is enough. I had to change the 4 channel to somthin more powerful and it sounds amazing so it is enough. But I like being extra so I upgraded again and now custom made my door pads to hold 2x 8inch minds each and a super tweeter on each door

[@mekyle9010]

@@Sohailmsh damn bro niiiice , where you from bud

[@Sohailmsh]

@@mekyle9010 Johannesburg, South Africa and you

[@mekyle9010]

@@Sohailmsh im from cape Town bud, how you finding those 73s they look lovely

[@Sohailmsh]

@@mekyle9010 give me your whatsapp number bru we can talk there

[@christianackerman2129]

Is the SD 8k rms for the mids and subs? Cause the subs rms. Is only like 1800 rms each, can they handle 4000rms each?

[@josiahwillemsebmx]

That's their power rating, as in daily power recommendation. Their max power is around 5000 rms.

[@farhaadsayed9697]

Do south africans wanna listen to music or get a massage?

[@kaldonmecoreddy6666]

Howsit man I know this is a old post...I have a pair of m650 pro pioneer mids...I cant fit those things in the door in your video description you say you running pioneer pro 6.5s...I'd like to know how the hell did you guys make it fit..when I test fitted my pair I had to bring it forward due to window coming down and the door pad would never clear...any advice would be high appreciated thanks in advance bru

[@gevonvanstaden9006]

Is that 0gauge wire

[@mekyle9010]

Hey man , quick question have you experienced any static noise after installing your parametric ? The sound comes from the mids and tweeters even when the radio is off and does not increase with volume or car Acceleration

[@Sohailmsh]

Hey man, I won't lie to you I had that problem when I installed my system but the noise mostly came from my tweeters. I fixed it by running new cable to all my speakers and just checking my RCA to make sure it is correct on the amp but also check your ground cable where it's attached to the body if it is sanded down properly.

[@mekyle9010]

I'm also running a factory radio with a Pac converter ,I installed the parametric yday and a component system but now I got this static noise and yes it is mainly through the tweeters ,when I unplug the RCA from the 4channel amp and run only my main amp for the sub then I get zero interference

[@mekyle9010]

The 4 channel amp is wired directly to the second battery in the boot , the parametric however is tapped into the head units power supply wire and runs alongside the RCA from the pac converter

[@mekyle9010]

I was advised if the tractor in the car is close to the parametric it could be it ,and I should move the parametric to the boot ?

[@mekyle9010]

Thanks for assistance bro, I managed to get the noise sorted with a ground loop isolator , everything sounds perfect 👍

[@nomcebomngadi127]

🎉

[@bryansphiwe7166]

Is this the same set up you battled Juicy J at the call out event with?

[@Sohailmsh]

Yea bro

[@bryansphiwe7166]

Impressive.You should get back on the SPL lanes again

[@Sohailmsh]

@@bryansphiwe7166 i am bru, But coming with a different setup

[@Sohailmsh]

@@bryansphiwe7166 whatsapp me bru 071 879 1231

[@bryansphiwe7166]

@@Sohailmsh Stock 2?

[@basilwilmot2053]

Niceeee

[@ashmedia1883]

Audio fusion is louder

[@Sohailmsh]

Where you from bru

[@ashmedia1883]

@@Sohailmsh Lenz bro

[@Sohailmsh]

@@ashmedia1883 you got Audio fusion in your car

[@ashmedia1883]

@@Sohailmsh I doo and it's loud 😳one of the loudest 12 inches iv ever heard

[@Sohailmsh]

@@ashmedia1883 what number you doing on the meter

[@thembelihleskosanahendrick9977]

Name of song plss 🥺

[@josiahwillemsebmx]

Linkin Park-In The End (Mellen Gi and Tommee Profit remix)

[@christianackerman2129]

Very nice flex 👌🏻👌🏻