3+2 and Simultaneous 5-Axis Machining | AVA Fusion 360

[@KETIVTechnologies]

Follow us! Facebook ►► facebook.com/KETIVTech/ Twitter ►► twitter.com/KetivTech LinkedIn ►► www.linkedin.com/company/ketiv-technologies-inc Blog ►► ketiv.com/blog/subscribe/

[@stonecook6052]

Hi I'm new to this software, what is the different between fusion 360 & autodesk inventor hsm

[@KETIVTechnologies]

Hi Stone, HSM is the toolpathing kernel built into Fusion 360 CAM. In looking at both Inventor HSM (now called Inventor CAM) and Fusion 360’s CAM workspace you’ll notice very little differences. The difference becomes noticeable in UI and overall software functionality. What I mean by that is as you may know Fusion 360 is a cloud based program where as Inventor is only local to your computer, this alone can be a deciding factor for some people who are either opposed or simply can’t work on cloud based software. If we’re simply talking about CAM environments there really isn’t much difference between both tools. If you’d like to learn more about either feel free to reach out to me at [e-mail]. Thanks, Alex

[@RGS_23]

Hola Alex, necesito un maestro en Fusion 360 CAM que me pueda responder las dudas en castellano. puedes ayudarme? saludos.

[@KETIVTechnologies]

Hola, Claro que le podemos ayudar. Mandeme un email a [e-mail] y le puedo responder sus preguntas. -Alex Alvarez

[@ekremdursunluer9119]

​@@KETIVTechnologiesis it also possible to use 5 axis simultaneous cnc in 3+2 mode?