Wow, really surprised to see someone doing this in 2020. Back in 1973 I did close to the same to a Tecumseh 5hp I found on a stripped mini bike. Had no carb or exhaust. I put a 30mm carb off an old Honda motorcycle on it. Made 18 inch megaphone exhaust pipe. Milled the head. Removed the governor. Modified the fixed timing ignition to advance with the throttle similar to the older boat motors. Put it on a cheap go-cart and it would get to 60mph in a heartbeat. Thing was a beast.
@syndeko1632 Жыл бұрын
How would it advance with the throttle? I might be doing this soon with a 10hp i might buy
@USA__2023 Жыл бұрын
@@syndeko1632 I used the same method that older 60s boat motors used. I don't remember which one goes first advance or carb. One the Tecumseh I had The ignition advance could be adjusted. The magneto had slots in it. I just cleaned up the surfaces, put brass bushings in it and spring loaded it to retard. Use a spring tied to the advance, once it's full to the stops you set it will not go further but the throttle will still be able to open. that's if the advance comes in first. If carb opens then advance do the opposite. I really don't remember which goes first, it was a long time ago LOL
@tonkatank045Ай бұрын
@@USA__2023so I'm trying to imagine the mechanisms for that set up. I have a 58' Evinrude, would that be like how the flex plate under the fly wheel rotates with the throttle being turned? Is that what advances the timing?
@USA__2023Ай бұрын
@@tonkatank045 yes
@MNpicker4 жыл бұрын
😯 Im soooo putting one on my old craftsman push mower 😎🤘🏼
@Johnny-ox1sc4 жыл бұрын
Great video,hey,can you add the link to that carb,would much appreciate it!
@powerROBY6 ай бұрын
hi, please answer me, I'm about to build a gokart with 2 seats, with a vertically transformed Tecumseh engine, having a clutch with an 11 tooth pinion, which traction sprocket do you recommend?
@CoreyFishes7405 ай бұрын
I love being told 15 times what's gonna happen without actually seeing it happen
@fantro10643 жыл бұрын
Wowww I've got the same bike. Hope you include the carb settings because I'm doing that to my streaker
@fantro10643 жыл бұрын
Hey man did you need to touch the adjustment screws or drill the jet? Mine is on the way
@TheMuncieracer2 жыл бұрын
What is the best way to get side cover off h35 do you take the screws out that holds bearing
@davidjordan5925 Жыл бұрын
Nice
@forthemind95563 жыл бұрын
I have the same motor but I can’t find a pipe with the same flange that fits I think the flange is 1 3/8.
@sprrepair40632 жыл бұрын
I have a 5hp Tecumseh that'd I'd like to add that carb to. Will it work with the governor installed? Will I be able to connect it to the governor linkages?
@Sussy-hotdog3 жыл бұрын
Where did you find the Header with the muffler. I'm having a hard time finding any flange exhaust with a 1 3/8" center to center mount holes? Thanks so much and nice work!
@1manshop3353 жыл бұрын
The header and muffler was built by me
@isaiahavila5419 Жыл бұрын
We’re did you buy the carb and exhaust from and what’s the name? Very interested in buying
@absent1882 жыл бұрын
Hey man I have a question did you remove the govener on this engine and if you did, did it blow up or is it ok to remove govener with just the carb?
@nickyz06232 жыл бұрын
With any engine if you're revving it at high RPMs (full throttle) and it doesn't have a load on it and it's just screaming for dear life, it's going to blow💣
@syndeko1632 Жыл бұрын
Hi do you know which exhaust I can buy online for a 3hp tecumseh engine? thank you
@omarmarquez43892 жыл бұрын
Nice work. How did u bypass the governor or did u remove it out complete. Thanks in advance.
@USA__2023 Жыл бұрын
If it's a centrifugal governor you can remove it, or unhook it from the carb linkage. I would remove the guts to keep them from failing inside the motor. The same goes with a vane / fan type. Just unhook the linkage .
@williamschisler4844 Жыл бұрын
What size carburetor is being used, new one?
@kellyedington87163 жыл бұрын
Awsome, i have a troy bilt tiller with this engine and seriously considering this project.. my daughter has a little mm80 bike but she is wanting a bit more power already lol but definitely isnt ready for a 212 or anything...
@kellyedington87163 жыл бұрын
So i have started this project, motor is on the bike now. Im struggling to tune this carb... I have good idle, super sensitive throttle (cable was a tight fit) but as soon as i turn 1/5-1/4 throttle im losing everything... What setting do you have your main needle clipped at?
@kellyedington87163 жыл бұрын
I also had to remove the rear fender to accommodate the carb/air filter and mounted the gas tank up on the rail behind handlebars... The bike is a mm80.... Really hoping to get this finished soon... The power diffrence from the stock 2.5 the mm80 came with struggles on take off... Ill post a vid if i ever get it to run with full throttle lol😅.. anyhoo thanks for the video and all the info so far... Any advice is appreciated
@donaldbixby97893 жыл бұрын
212s suck
@davidfira26672 жыл бұрын
Will this carb allow me to bypass the stock throttle linkage (which is missing I think my governor bar is as well) on my 3.5 Tecumseh? That would be great. Just got into minibikes for the grandkids. any help would be appreciated. Can you recommend an exhaust pipe & muffle that runs through the frame straight back? Thank you
@1manshop3352 жыл бұрын
Yes...this carb setup will do away with the stock linkage and governor the pipe I used was an old tecumseh header that I found on ebay there hard to find but I extended it 5 inches
@davidfira26672 жыл бұрын
@@1manshop335 Thank you for the info. This is a great alternative.
@daregamez3932 жыл бұрын
Hello dude. Great vid. What's the bore for the clutch please
@1manshop3352 жыл бұрын
3/4
@shaunjoiner7322 жыл бұрын
Hey gave a question what carburetor did you use it looks like a ebay pz16 carb ?
@1manshop3352 жыл бұрын
Click on the link... I pined myself to where you can get that carburetor
@randallschmitt7297 Жыл бұрын
Hi there I have the same engine was that a pz19 carb I ordered a pz20 too big wouldn’t seal thanks
@279eugenio4 жыл бұрын
Hi, Idk much about engines and sorry for my English... I have a tecumseh 6 or 6.5 hp engine and I want to get more speed out of it, any ideas on what to do?
@1manshop3354 жыл бұрын
Remove the governor or get a carburetor like this for more power
@aarestorations78674 жыл бұрын
What’s up man I have this same motor on a manco I restored recently on my channel but I was wondering how the whole removing the governer works is it like the predator remove the gear and plug the hole
@1manshop3354 жыл бұрын
I'll make a video on it tomorrow so stay tuned and I'll show you how I did it
@fangazfunky3 жыл бұрын
@@1manshop335 did you ever make video
@absent1882 жыл бұрын
Hey any clue what that hose to the left is coming out the engine looks like a crankcase breather no?
@1manshop3352 жыл бұрын
Yup thats a crankcase breather
@johnnyholder40503 жыл бұрын
How is the port match from the carb to the manifold?
@1manshop3353 жыл бұрын
There about the same
@josecid99863 жыл бұрын
mikuni 22mm are?
@Stingyduce3 жыл бұрын
How is the fule making it to the carb now that the inlet is on the left side??
@1manshop3353 жыл бұрын
Run a longer fuel line the gas tank is still higher than the carberator so it still flows fine
@Stingyduce3 жыл бұрын
@@1manshop335 thanks
@fantro10643 жыл бұрын
What did you do to adjust the carb? Got mine today and it idles but you give it gas and it dies. Put the choke on and it runs better but not good at all.
@1manshop3353 жыл бұрын
Adjust the fuel Neatle to give it more fuel
@fantro10643 жыл бұрын
@@1manshop335 is that what you had to do? There's two adjustment screws and the clip on the throttle slide. What's your screws set at? And how did you do the gaskets? Thanks
@kellyedington87163 жыл бұрын
You had any luck yet? Im having the same issue... 🙃
@fantro10643 жыл бұрын
@@kellyedington8716 what you need to do is use the plastic spacer with the slot for the o ring. Use the original tecumseh gasket between the intake and the spacer. Take the slide needle clip and put it all the way to the bottom, towards the point of the needle. Drill the carb jet out to .32, If that doesn't work try .39. Turn the screw on the left to 2 and a quarter and adjust to the highest rpm at idle. Bring the idle down and you should be set, give it gas really slow. Not full throttle all at once. Slowly increase the throttle
@kellyedington87163 жыл бұрын
@@fantro1064 thank ya sir, i had it soo close to ready, i did have best luck with c clip on the very bottom
@279eugenio4 жыл бұрын
This carb will work on a 6 or 6.5 hp tecumseh?
@nathanbutcher18643 жыл бұрын
I would go bigger like a 26mm carb
@ALMIGHTYGARAGE2 жыл бұрын
What about a 5.5 tecumseh
@nique54095 ай бұрын
Hey what size will u recommend for a 10hp
@1manshop3355 ай бұрын
28mm mikuni
@nique54095 ай бұрын
@@1manshop335 thanks
@tux-4713 Жыл бұрын
What’s the link to it
@kevinchunasamy97033 жыл бұрын
Hi would the bike still be rideable without the governor removed?
@1manshop3353 жыл бұрын
Yes
@kevinchunasamy97033 жыл бұрын
@@1manshop335 thankyou
@1manshop3353 жыл бұрын
Anytime 🤘
@ALMIGHTYGARAGE2 жыл бұрын
Can I use this carb on a 5.5 tecumseh
@twilli81183 жыл бұрын
Will this work on a 5hp tecumseh Go-kart
@1manshop3353 жыл бұрын
Yes
@donaldbixby97893 жыл бұрын
Tecumseh didn't have enough money for a China carb??? Huh. I doubt that's the reason. Glad you are an engineer for that company
One more thing. Can you please go back in your Amazon order and confirm this is the correct Carb. The link you posted is for a PZ20. Are you sure it wasn't a PZ16? For the PZ20 carb (the one on your link) to work correctly on a Tecumseh H35 (3.5 hp) they say the PZ20 will need some jet modifications or else you have to leave the chock 3/4 open to get optimum use.... where as the PZ16 runs as designed. So can you do us all a favor and verify on your original Amazon order posted in your account that the link here above is the one you installed or that when you did your test run of the engine in this video, that you did not have the chock partially open. Thanks.
@1manshop3353 жыл бұрын
This is the one I bought for this engine
@ALMIGHTYGARAGE2 жыл бұрын
Hey got a ? I have this engine but its a 5.5 and has the weird throttle linkage bc snow blower it was used for so tryn to fig out how u could use a linkage for.go kart or I can get this carb if it would work on a 5.5 hp tecumseh thanks
@1manshop3352 жыл бұрын
Yes it'll work
@ALMIGHTYGARAGE2 жыл бұрын
@@Sussy-hotdog i just watched another KZbin channel if you kept your old jets out of the original carb you can put them in and they will work is what someone else said if your having trouble with that