A good way to look at it is the dies are 1, 2, and 3 ...but on a four die set it's 1, 2, 3a, and 3b.
@findingunicornsstocks59533 жыл бұрын
Thanks 👍 I'm new to reloading. Just got my press and all the tools needed to reload 9mm. I still have much to learn. Great video 👌
@ar-gaming90146 жыл бұрын
Love you older guys you from my paps day more knowledgeable and better at explaining stuff ive reload for years and avoided 4 die sets
@jhooton753 жыл бұрын
Thanks for explaining. I'm in the process of trying to buy some dies right now and this helped answer one of my questions.
@taylorgrasman81745 жыл бұрын
Thank you very much. A big help for someone considering entering the hobby for sure.
@SA-lr1sf3 жыл бұрын
Great explanation. Thank you for helping me understand these dies.
@asshole111016 жыл бұрын
yes exactly what i needed thank you very much sir hope you have a great day
@Razornipple5 жыл бұрын
Nicely done, I learned something today!
@archangel200317 ай бұрын
In the rifles, the 4 die sets have a Full length die and a neck only sizing die. The pistols set just add a factory crimp die.
@kendallsmith63959 ай бұрын
Liked your video Mr. Grizz! Very thorough unlike most I have watched (Jabb Intended). Most of the so-called pro reloaders never mention charging or which die the powder goes in. I do not comment much but just wanted to give ya way-to-go! 👍
@meals24u Жыл бұрын
*Great explanation, thank you for sharing*
@Sardy5403 жыл бұрын
Awesome vid, thanks from Australia Grizz!
@acpiping39595 жыл бұрын
JUST GETTING INTO RELOADING MY SELF & WAS WONDERING ABOUT THAT 3 & 4 DIE SETS,,
@EricAndHis19117 ай бұрын
On the 4 die set the 3rd die is still a seat and crimp die. The 4th die, for Lee anyway, is the factory crimp die which also can "iron out" some deformities that the resizer missed or that was put in during the other processes. This, of course, is about pistol dies and not rifle dies. Great vid though, thank you!
@iceandhotwax4 жыл бұрын
the seat die in the lee set also will do a taper crimp ...
@Mr1bigsexy Жыл бұрын
Now I know the difference.I ordered a Lee progressive 4000 press and it only came with 3 dies but the separate other caliber dies I have ordered are 4 die sets.I was really confused but now I know the difference.thanks for the video.I’m still in the process of setting the press up and I know nothing about setting each die to their specifications and the instructions that came with this press may as well been no instructions
@quagmyer72304 жыл бұрын
Thanks for the video sir.
@alejandroflores-samaniego93205 жыл бұрын
Great explanation, I am new to reloading and I was wondering what the second die was for rcbs. I haven’t gotten to the flaring of case mouth yet, only resizing and re-primer. I am still doing some research for my 45-70 loads.
@sunrisesurfbum7 жыл бұрын
Now I get it, thanks.
@SteelDinger10 ай бұрын
Excellent, the ah ha moment the Mud is clearer now , am thinking priming after resize & flare the case ??
@kevinpillsbury5291 Жыл бұрын
I’m curious about the difference between a 2 and 3 die set
@eidtnaci Жыл бұрын
I can’t speak for anyone else but u definitely helped me because I’m new to reloading and was wondering do I need to buy a four die set or is the three ok. 👍🏾✌🏾
@paythesnucka410020 күн бұрын
I was taught to never go off of the cantalure "crimp groove" only go based of OAL over all length ?
@mitchappleby91665 жыл бұрын
Lee's instruction sheet says the 4th or Crimp die also sizes the brass so it can't be deformed. How important is that? -- Thanks for the video. It was just what I needed.
@EB-vx4vy4 жыл бұрын
Good to the point video, thx
@timhatchett70482 жыл бұрын
Good job
@seankelley61272 жыл бұрын
Thx.
@tegum563 жыл бұрын
Can you get by with a 3 die a reloading set or do you have to have the 4 die
@cscottmcqueen3 жыл бұрын
The first three dies in a Lee set are the same regardless, you can crimp and seat with the 3rd die. The 4th die is a factory crimp die which resizes and crimps
@jamesknightley4201 Жыл бұрын
1.75 speed works pretty good for this....
@tegum563 жыл бұрын
I'm loading 45 Long Colt and I have the three die lisset but do I need the factory crimp die
@JustDeeOutdoors3 жыл бұрын
I got car sick by 2:30, I'm sure it was good information though. Invest in a tripod
@andeanphoto3 жыл бұрын
How about neck sizing?
@MikeyMike-ql3ry2 жыл бұрын
On the 4 die set, will the bullet seating die also crimp the bullet? Or not?
@jimmysp4des229 Жыл бұрын
A year late, but yes
@philweed16032 жыл бұрын
One eye is looking at ya, the other is looking for ya.
@OldBiker545 жыл бұрын
how u seat the primer?
@alexs.56755 жыл бұрын
I'd also like know
@mattrickard37164 жыл бұрын
@@alexs.5675 Either with a hand held primer tool or the priming tool built into your press that primes on the full down stroke of the handle.
@redtra2363 жыл бұрын
@@mattrickard3716 Or with a separate non handheld unit