3-GUN LIFE: THE 3-GUN RIFLE [EPISODE 6]

[@davidwright4361]

I appreciate your videos, my son and i are looking forward to getting into the sport of 3 gun.

[@williampowell8083]

great use of video's of you shooting. your vids are just top quality. like how you say what you personally use.

[@bullittmcqueen]

Thanks William!

[@ferfin2]

Hey Mac, that's a really nice Wilson Combat BCM grip you have there! I bought the same exact one for my rifle I just got done building, which I ordered from Strong-Side Tactical before I knew about your videos here on KZbin. Great videos, keep them coming. :-)

[@bullittmcqueen]

Thanks Josh!

[@vmealer11]

Will that scope work for a 1000 yard competition? I’m looking for a scope that I can use for 3 gun and 1000 yard competitions. I have a Tikka T3X TAC A1 6.5 Creedmoor bolt action.

[@seanwhite304]

i was running my BCM RECCE 14 KMR for about a year with an Eotech XPS2. We only shoot out to 200 yards so 14.5" barrel works just fine. i know switched to the FN15 TACTICAL CARBINE with a 14.5" CHF MATCH barrel. I also run a G17 G4 and a Versamax Tactical. And i still use a red dot i just switched to the ROMEO 4c. MY 3 Gun setup is what i would use for HD as well. I do not beleive u need to have an 18" setup to be good at 3 gun. I have seen my 14.5 run with a 18" out to 400 yards and less than a 1 inch difference on the target. I also use a BCM COMP MOD 1

[@bullittmcqueen]

Sounds like a good setup

[@savagemann69]

Great video Mac!

[@bullittmcqueen]

Thanks man!

[@mbaier91]

Which buffer and spring are you using?

[@jamesbradshaw5137]

Ready nice video Mac I always learn from your videos Thanks an keep up the great work also the Lucas bore cleaner really worked great in the ultra sonic cleaner an I've been using it to clean some of my suppressors also!

[@bullittmcqueen]

+james Bradshaw Thanks! I really like the Lucas products!

[@chrism2796]

only parts you missed were the upper and lower, or do those make almost no difference?

[@bullittmcqueen]

+chris m They don't make much of a difference overall in the rifle. But since you asked if you want a bit more detail about the lower and upper on my rifle check out these videos: kzbin.info/www/bejne/qKitqIWml7p2aLs

[@chrism2796]

Thanks Mac. Awesome stuff as usual

[@RubiconV]

Mac can you tell me what ammo you use for your shotgun? I'm trying to some new ammo to try and so many choices. Thanks

[@bullittmcqueen]

Sure! I actually did a whole episode on this question since I get it so much! Here: kzbin.info/www/bejne/o17Fe62On9ibr8k

[@thegoldenhook4342]

I am 13 and I’m a big shooter and I want to start three gun my parents don’t like the idea of it any advice?

[@armstrong2052]

Dude I'm digging all this series! very informative. I'm going to practice all winter then give it a go this spring! by then I will hopefully not get disqualified lol I do need a better shotgun my moss 5 isn't very ideal. thank you Mr. McQueen!

[@bullittmcqueen]

+armstrong2052 Thanks for watching!

[@timgawenda4486]

Great vid man. What made you decide to take your SLR rifleworks rail off and put the ALG rail on your Vltor rifle?

[@bullittmcqueen]

+Tim Gawenda SLR rail was too small inside diameter for the gas block. The gas block was hitting. The ALG had more room inside

[@V2win1000]

Which Wilson Combat rifle is that exactly? I just ordered a Wilson Combat .223 wylde SS and this is one of very few posts I've been able to find with a similar rifle!! Very nice spec. is there any particular competition that would suit the 223 wylde with a 20 inch barrel any better than 3 gun?? its going to be my first and only gun for a while and even though I have a lot of practice ahead i know i'm eventually going to find my way into local competition. do we have any marksman style events here in Florida or something that would only require a rifle such as mine? Awesome job on your videos hope to see new content in the future!

[@bullittmcqueen]

Not a complete Wilson Combat rifle, only the billet upper and lower matched set. As far as rifle matches, I just moved here so still learning about whats available. What part of the state are you in?

[@V2win1000]

BullittMcQueen I'm out of east Orlando. I'm new to FL also and from what I hear it's difficult to find spots to practice long range.

[@bullittmcqueen]

You need to shoot at Universal Shooting Academy in Frostproof. Best range in FLA

[@V2win1000]

man that place looks awesome! just under a few hours out, so i'll be headed that way as soon as my rifle arrives. I haven't even chosen an optic aside from the factory flip sights, and with all these 3 gun videos i'm already having a look at pistols and shotguns lol.

[@greganixter7352]

Hi Mac - sorry I wasn't clear in my question. Do you zero your rifle at 50 yards or 100 yards or???

[@bullittmcqueen]

+Greg Anixter 50yds

[@greganixter7352]

Hi Mac - Really enjoy your videos. What range do you zero your rifle at?

[@bullittmcqueen]

I shoot at Talon Range in Tallahassee FL

[@tizbb1962]

great video, thank you

[@bullittmcqueen]

+Meow kitty Thanks!

[@colt.4534]

What reticle are you using on that Vortex Razor ? JM1?

[@bullittmcqueen]

JM1

[@MrRhsmike189]

How you liking the tac con buffer?

[@bullittmcqueen]

+M0M0 I like it a lot. 100% reliable

[@MrRhsmike189]

Awesome, which do you think you prefer the jp scs or the tac con? Also is that why you went for the heavier buffer tube to add some weight because of how light the tac con is. That's part of the reason I like my jp casue it adds 7 ounces to the rear.

[@bullittmcqueen]

+M0M0 Exactly. If you want the weight to balance the rear, the the SCS is probably best. If you want function and very affordable, then go with the TAC COM

[@shkraus]

Do you have a parts list for your 3-gun AR?

[@bullittmcqueen]

In the description of the build videos called "the 3-gun project" on my channel

[@kulot1n10]

how much did your beautiful setup cost you? i hope thats not rude to ask?

[@bullittmcqueen]

Not sure but a good 3-gun setup will range from $2500 for the most economical to between 5-10k for high tier equipment

[@kulot1n10]

2500 would be my budget with an awesome optic. Would you recommend a full build? Pretty much I'm asking for you to build me a 3gun ar for 2500. I also live in California. I just want something I can compete with but it's also a battle rifle.

[@MrBendayho]

Sir where do I get a magazine stand like that?

[@bullittmcqueen]

Its called a Magpul MagPod

[@mike70atgmail]

Great video Mac. Excellent and very informative.

[@bullittmcqueen]

+Mike Roberts Thanks Mike!

[@waitwatlol]

Why not piston driven?

[@bullittmcqueen]

Harsher recoil, heavier gun,and parts not as interchangeable. Usually a piston-driven system will have a few parts that are proprietary to that manufacturer. DI guns have been the standard for many years and parts are pretty much plug and play.

[@tizorivinus7293]

..