3 phase energymeter connection | 3 phase KWH meter connection | energymeter connection with CT |

what is MULTIPLYING factor
• What is MULTIPLICATION...
Is video me maine 3 phase energymeter ki wiring explain kia hai,
1st-energymeter without CT for low ampere range(0-100 amp)
2nd -energymeter with CT for high ampere range(above 60 ampere)
I have explained both types of energymeter and their wiring diagram and connection..
So watch full video to understand
voltmeter ammeter connection
• Voltmeter aur Ammeter(...
#KWHmeter #energymeter #3phase

[@PEARLENGINEERING1]

MULTIPLYING factor and kwh relationship kzbin.info/www/bejne/rWeQco1oia9sbbs

[@raghuarmani8341]

Very good. Meter par kahaan likhaa hotaa hai kee ct kaunsa purchase karen

[@sandeepvivek6134]

Is it possible to change the CT ratio of the meter?.I had to connect an external 300/5 CT for measurement.All readings except voltage are scaled down by 60,so have to manually multiply every other reading by 60.Is it possible to set it on the meter itself(ER300P)

[@user-mm6mg3sb3x]

3 phase meter par -5A likha h. Ishka KWH units mai kish se multiply karna hoga Total KWH ke liye.

[@saurabhshrivastava6207]

We have done same connection but kwh value not getting increase even on load. What can be the problem ??

[@PEARLENGINEERING1]

Check ct

[@dushyantthaker1091]

Sir direct 10-60 A. Energy meter ko ham external 500/5 ki CT se Chala sakate he

[@baijumandal43]

Sur kWh and ct coilse unit kaise nikale

[@PEARLENGINEERING1]

Multiplying factor(mf)ct aur pt se niklega Aur kwh me m.f se multiply karne par actual kwh yani unit aa jaega..

[@PEARLENGINEERING1]

Mai eske lie ek video banaunga

[@baijumandal43]

Sir jaise 400/5 ka ct hai to kya iska ratio nikal ke kWh se multiply karne se unit nikale ga

[@PEARLENGINEERING1]

Ye video dekho kzbin.info/www/bejne/rWeQco1oia9sbbs

[@thakurelectrical4039]

kzbin.info/www/bejne/hWWUZ6eqpdJsfdk