3 ROLLER VS 2 ROLLER GRAIN MILL | Homebrew

[@jauld360]

Sheet metal is often sold with a protective film and that's normally removed on items for sale, unless they are built by Smurfs, who love blue things.

[@21kiwi24]

Can you use these mind of roller mills to make flour? Or only course for brewing?

[@speed_rider362]

Hi! I cannot for the life of mine assemble this thing (the 2 roller mill). Both side panels do not mesh with the drilled screw holes. You can force it, but then the bottom bent metal lips collide with the mill wheels and the whole mill makes a brutal screeching sound. So my question is - should I bend the lips some more to avoid contact with the grinding wheels?

[@Scootenfruity]

I bought a two roller mill 2-3 years ago and it worked pretty well. Got a 3 roller mill as a present 3 days ago and wanted to look up if there is even a difference. Sounds like I might have an easier time milling the grain now?

[@HOMEBREW4LIFE]

Not really

[@Scootenfruity]

@@HOMEBREW4LIFE fml, they could have given me something better and cheaper instead

[@SantiagoLopez-bi5ju]

Good afternoon Mr. Thanks for your valuable information. I was wondering if this grain mill could be use to make peanut butter. Do you think it would work? Thanks for the attention.

[@HOMEBREW4LIFE]

yes as long as your not running liquids or oils thru the rollers, cheers!

[@gregl3580]

Thanks CH. You rock!

[@PickledAndFermented]

I haven't done an all grain brew yet, but I'm binge watching to learn. I'm a winemaker and distiller, so I have a lot of the knowledge. I'm planning to do brew in a bag. Anyone know if I can run the grain through a Vitamix and ferment it? I don't have a mill, and shit is expensive.

[@dimbrewingco]

Yo CH! I bought the same mill, but I’m having problems using it with my power drill. Did you make any adjustments? I tried using some Teflon tape for better grip and it still doesn’t want to be nice to me

[@21kiwi24]

Any luck with the drill? Is this type of mill too course to produce flour, and only for brewing?

[@markluxton3402]

I have an idea to improve grain mills. Should do a better job, and work faster. What company would you suggest deserves to receive such design?

[@crabmansteve6844]

I clean off the residue with 93% isopropyl or pure acetone. It has low latent heat of vaporization and leaves nothing behind, doesn't tend to tarnish the metal either.

[@GregMurphyCanFixIt]

The blue film is PVC and protects against surface imperfections (scratches and marring) during shearing and forming.

[@HOMEBREW4LIFE]

Good looking out greg! I thought it was just to F with people lol, cheers braj!

[@GregMurphyCanFixIt]

@@HOMEBREW4LIFE No prob, Braj. I work in the aerospace metals industry and this is how we buy sheared stainless sheet stock. However, the film should come off easily, in 1 pull. Cheers!

[@fenchurchmarie5224]

I just removed that film from my 2 roller cereal killer. Mine came assembled, but a utility knife was all I needed. My CK looks EXACTLY like the ferroday! Keep these coming, good times!

[@dantedeluca978]

Thoughts on fabricating a larger hopper?

[@chrisz8532]

Yeah mate, get your missus to buy OMO in the square 7 kg bucket, wash it, cut the top out to size and bolt it on. Works a treat💪🇦🇺

[@EnclaveZA]

BRAAAAAAAJJJJJJJ !!!! I literally just got this blue mill!!!!😂😂😂😂😂😂 and as I'm mashing in my first crush this comes on!!!! The universe always sends you to me on a brew day! Blessings!

[@nayanikah.d.2718]

Please give me knlodge about sugarcane creshing technology (3 roles)

[@nayanikah.d.2718]

I hope you are giving knlodge about sugarcane creshing technology fast as soon as fast ji🙏

[@yonagwy5826]

The blue film comes on the metal. Keeps scratches from happening and keeps it from oxidizing.

[@franciscogordin2578]

yes, for manufacturing and "just before" assembly. Keeps it pretty for the end user. being a flatpack, the end user assembles and thus get your de-peel on!

[@ussmak2902]

Wasn't expecting that! I've never had anyone mention me in a video. LOL

[@kylepietro396]

What size screw/bolt did you use to attach it to the base? Looking to build mine for this mill this week!

[@HOMEBREW4LIFE]

no clue

[@TheBruSho]

I have that same Ferroday mill and can confirm it works great for 5 gal batches and can confirm that blue stuff was a pain in the ass to get off every bit of metal

[@HOMEBREW4LIFE]

Dude it works too well! yeah feels good not having to crap on a brand lol

[@carolhardy797]

My SSN is 333-33-3333. Great vid, great info !!!

[@grumpysandwich]

Thanks this helped me decide what mill I need. You’re my new favourite brew guy channel

[@PhysisEraser]

By the grace of God I found a Cerealkiller which was barely used on Craigslist last week. Dude gave it to me for $50. Total Braj.

[@HOMEBREW4LIFE]

you won! nice catch braj

[@BanksBuilt]

I’ve had that exact 2 roller mill for over a year and it works great!

[@alvaradobrewhouse6387]

The one thing missing from my brew lab, a grain mill! You sold me Braj. PS. SS 555-55-5555

[@jonathanelliott8423]

I run a momster mill 3 with .38 settings. I also use enzymes to make to help with efficiency.

[@LAAM619]

I bought a ferroday co2 regulator to replace my taprite... so far so good. Out lasted the tapright already.

[@HOMEBREW4LIFE]

Ferroday rocks!

[@_stars_at_nite_7184]

This is my next item on the home brew list. After this, then it’s on to building my fridge/kegerator. Cheers for the heads up on the mill. 🍻

[@coryserratore5951]

For Canucks out there, I just picked up a 2 roller Malt Muncher for $104.99 CAD at Ontario Beer Kegs.

[@HOMEBREW4LIFE]

Nice come up!

[@superslyko123]

The most attractive thing about your channel is you keep it light. Real world, cheap, no bullshit. We're homebrewers. We're brewing beer! It ain't no rocket science. I'll never forget the idiot in my brew club that has a $5,000 system, who's beer tastes like shit. Now if you really want to score points, let's see some Doom or Duke Nukem!

[@HOMEBREW4LIFE]

💯

[@mawi4112]

There isn’t a single home brew store in or around my town

[@HOMEBREW4LIFE]

Slim Pickens these days

[@mawi4112]

@@HOMEBREW4LIFE it's germany too

[@Ray-ye1rj]

Are you brewing in a bag?

[@HOMEBREW4LIFE]

we are not

[@Ray-ye1rj]

@@HOMEBREW4LIFE I thought the crush in your video was very fine. just asking. thanks for repling.

[@joelw2023]

I've had a Cereal Killer 2 roller for 4 years. Solid.

[@HOMEBREW4LIFE]

Hell yeah solid feedback Joel, cheers braj!

[@jcinsaniac]

Had a 2 roller for a couple years - it's totally a game changer - saves U money on grain and makes your grain go further - last longer. Question - is the crush on a 3 roller more -UNIFORM- or more FINE? what's the diff? Totally agree with your take on everything else. CHEERS BRAJ!

[@HOMEBREW4LIFE]

dude honestly at a 5 or 10 batch scale, I'm not sure if there is a difference. And if you can't tell... always go with the more affordable option

[@jcinsaniac]

@@HOMEBREW4LIFE MOST EXCELLENT!

[@Louz_Drumz]

your frequent mega man content is equal parts hopeful and arousing.

[@theronjclark]

05:55 "Don't follow this part"....lol......this is why you rule.....🤘🤘 I can trust you.....

[@HOMEBREW4LIFE]

Oldie but goodie!

[@ignoranceisstrenght1984]

Ok, you made me laugh when you munched a handful of it. That's one thing i like about your channel. I can tell you were a comedian. That shit gives you one hell of an edge. You know how to communicate and you can have fun doing it.

[@coryserratore5951]

Poor man's grain mill there. C'mon, you're gonna boil that wort anyhow.

[@chrisz8532]

I just left the blue on cause it looks cool ✌️

[@alexrocks135]

What happened to your IG?

[@QuantumLeap11]

Storm Eagle theme is straight 🔥

[@nccountryboy76]

You can find those ten gallon corny kegs. For $200+ . Crazy price.

[@markzunk9925]

Great video!

[@donovansanderson5970]

Alright, alright, alright! I need a grain mill... Munch that malt braj

[@HOMEBREW4LIFE]

See you tonight brajo!

[@12packnight81]

What Up BRAJ's. Just Got the 2 roller inn your vid a couple weeks ago. Wet condition that grain bros! I"m hairy and I can prove it! The 2 roller is bomb.

[@Fabianwew]

I crush my malt by chewing it and spitting it into the tun! My jaw is coming loose!

[@TheEvilGreebo]

Really loving your videos. New brewer here and loving your down to earth no nonsense approach and my kind of sense of humor. Also in case you were joking - the blue film was to protect the metal from getting scratched. Wouldn't want your pretty new device for destroying organic material with compressive violence to look ratty out of the box! ;)

[@HOMEBREW4LIFE]

Good looking out cheers!

[@acer651]

Waterworld 2 I'm in.

[@derekp6636]

Good looking out, already watched your previous vid and bought the malt muncher and it's been awesome. Need a stronger drill than my lil ryobi though it gets hot quick!

[@HOMEBREW4LIFE]

thx for still being here DP, but dewalt > ryobi

[@chrisgirardi2827]

Yeah I have a ryobi and it sucks for this …is there a specific dewalt drill u etc one d?

[@chrisgirardi2827]

*you recommend ?

[@CamFromOz]

Yo i'd love to give you my SSN is, buuuuuut we don't have those in Aus

[@MasoThings]

O man that's the mill I got. Pain in the as taking that blue film off.

[@HOMEBREW4LIFE]

Ha true story. Just a one time hassle tho 🍻 ❤️

[@pontusakesson856]

it comes off easy if you heat it with a hairdryer or heat gun

[@davidhazell8154]

You're awesome. UK says hi!

[@HOMEBREW4LIFE]

much love! Cheers DH!

[@HopKillerBrewery]

If you’re able to buy grain in bulk and you brew pretty often, you’ll make that money spent on the grain mill BACK in savings from the discounted price you get on bulk grains. Good one Braj

[@drksun]

agree! My LHBS sells 2-row for $2.50/lb (milled or unmilled), but they will sell me a 55lb bag of rahr 2-row for $44 ($0.80/lb). Cost of milled 2-row per pound = $2.50 Cost of unmilled 2-row per pound = $0.80, Difference in cost per pound = $2.50 - $0.80 = $1.70 so $1.70/pound × x pounds = $160 so I would need to mill 94.12 pounds of 2-row to break even assuming I spend $160 on a nice grain mill. ~57lbs with a $97 FERRODAY mill (~1 bag of 2-row!!). To put it another way you would save $93.50 buying your first 55lb bag of 2row. Today I spent about $20 on grains for a cream ale. It would of cost $9.80 if I had milled my own bulk 2-row and bought the adjuncts from LHBS.

[@DeusHircus]

Love the brewing videos!

[@biohybrid_396]

Learning from the best

[@HOMEBREW4LIFE]

you're still around! You're still a braj! I hope ur good in texas fam

[@biohybrid_396]

@@HOMEBREW4LIFE yea was rough at first but all is good g.

[@leesuschrist]

I have the "crop duster" from adventures in homebrewing. It's a 2 roller for 80 dollars, and it gets the job done. I brew about once a every couple months and I will never need anything more than that. If you brew a lot or do more than 5 gallon batches I would suggest stepping up to the 3 roller, though. I swear all these mills are made in the same factory in china. They all look the same!

[@sleyterth]

I really love music in your vid cheers🤙🏾

[@HOMEBREW4LIFE]

Thx for watching Sleyterth!

[@PortlyGentleman]

Awesome video crush king 🍻

[@robertguay3773]

my grain store mills for free I can even use his if I want to do it.

[@starshot5172]

Hey! I got unsubscribed from your channel, I haven't even been subscribed for long. Love your content

[@HOMEBREW4LIFE]

Cheers star!

[@starshot5172]

@@HOMEBREW4LIFE Just bought my first malt mill, your advice is great for a beginner like me. I've got all sorts of malts and regular grains, my buddy picked a shitload of hops, I cannot wait to get started!!

[@trevgoldie]

I got that exact mill.... see you soon

[@HOMEBREW4LIFE]

See you at 7pm!

[@lexsteel8528]

I love your videos🥰

[@HOMEBREW4LIFE]

I love you being here, see you tonight brajlord!

[@TedeTVs]

Jaaaaa water world!!!!!

[@TedeTVs]

My man!

[@thevoice4758]

The 3 roller malt mill has no advantage over the 2 roller mill, on the contrary. The 3 rollers are difficult to adjust and the result is usually worse than with 2 rollers. Keep it simple ... and good.

[@bhhacker]

www.amazon.com/gp/aw/d/B07QTWQGG7/ref=ya_aw_od_pi?ie=UTF8&psc=1 I used this one and have been using it the past 10 months. So far so good. The blue plastic sticky stuff was awful to remove but it comes with a base that covers a 5 gallon bucket and its like 112 bucks.

[@quailstreetcoffeeroastersm6674]

SS# 575-56-0110...I have life lock so you can't touch me! Monster Mill 3 roller is what I use.

[@FermentationAdventures]

Now I feel like a fool for selling my long in the tooth Barley Crusher on facebook and upgrading to a Malt Muncher 3...

[@HOMEBREW4LIFE]

all good braj! I have both!

[@RobNorton]

111-11-1111 😂 been looking for this exact info about to get a grain miller

[@HOMEBREW4LIFE]

ur in big trouble lol! Thx for watching rob and 2 roller ferroday all the way

[@fenchurchmarie5224]

Man, really need to play some OG Mega Man 3 now...

[@HOMEBREW4LIFE]

Megaman 2 but nice catch, cheers FM

[@upstating]

I don't know why I always played Flash Man level first. Maybe I thought it was easy...? Dunno. Does it still bother people Air Man's weakness was the leaf blower? At least the other ones made sense.

[@hc8714]

still using a victorian mill after 10 years, I am such a cheap ass

[@tommanning7337]

Noice 👍🏻🍺🍺

[@ontheriver1000]

I’d pay good money to see water world II.

[@HOMEBREW4LIFE]

Same! Lets run it back!

[@MadZer0]

Beef barley soup, let’s see it

[@dantedeluca978]

6 Minute abs? Why would you buy 6 minute abs when there's 5 minute abs sitting right next to it?

[@barrybritt2210]

i have a corona mill works good for biab

[@HOMEBREW4LIFE]

Good call!

[@ziggywonka50]

Subbed to this Chanel and the next day my ex HMU. Coincidence? Doubt it.

[@HOMEBREW4LIFE]

Nice! Ur in the drivers seat again!

[@LightHawk328]

Brauj

[@BanksBuilt]

#waterworld2

[@HOMEBREW4LIFE]

IM MORE THAN DOWN #kickstarter

[@alantran6901]

Here I am still on my $20 corona mill. 85% efficiency with BIAB.

[@HOMEBREW4LIFE]

whoooaa, can you send link please? Sounds like an epic youtube video

[@alantran6901]

@@HOMEBREW4LIFE www.ebay.com/itm/Manual-Corn-Grinder-Flour-Maker-Wheat-Grain-Nut-Mill-Grinder-Kitchen-Tool-/381892466281?_trksid=p2349624.m46890.l49292 There's some mods you have to do but a quick google search of "Corona mill mods" will tell you everything

[@TheEllegaard]

:-)

[@HOMEBREW4LIFE]

See you tonight brajmus!

[@TheEllegaard]

@@HOMEBREW4LIFE Cant wait:)

[@danm8411]

So .... where are the results of the comparison? You said same water, same grain, same hydrometer .... only the mill is different. The information content of this video is near to zero.

[@HOMEBREW4LIFE]

all the answers are right here! homebrew-4-life.creator-spring.com/apparel

[@roy4028]

more cosmetic than practical scientific video, good for you but not much information. good repore on video skills but not practical for brewers. the crack is important, not too fine not too course is what I was looking for. relax....have a home brew Ill move on.

[@HOMEBREW4LIFE]

No clue what any of that means but cheers!

[@geetarzan69]

How do I get some shirts to showcase at the brewery?????