In this video we replace the deck belt on a craftsman/troybuilt 30" rear engine riding mower. R110/TB30
Пікірлер: 223
@D-MAN1072 жыл бұрын
Thank you all for the awesome support I hope this video helps someone out👍🔧
@ajalberter94525 ай бұрын
What is the size of the belt?
@mattmgarza14 күн бұрын
I'm 40 and I have never owned a riding mower. I've done my fair share of work on vehicles but don't know the first thing about riding lawn mowers. This video is super helpful as I have the exact model of mower. I've got floor jacks for cars, a transmission jack, bottle jacks, etc, and several good tree stumps so hopefully I can get it in a safe spot for me to do this procedure. Next for me to learn is how to wash the deck....I see the hose fitting on it, lol. Thanks again.
@D-MAN10713 күн бұрын
Right on
@greglewis5880Ай бұрын
Thanks, this was the best video online. I was able to successfully change the drive belt and my mower is running like new!
@D-MAN107Ай бұрын
Glad it helped
@WilliamJohnson-xp7td Жыл бұрын
I just want to say THANK YOU!! My belt was shot ran across this, watched a couple of times and I was able to change my belt just by looking at this video.. Great clear instructions...Will be subscribing.. Again Awesome job and thank you!!!
@D-MAN107 Жыл бұрын
Thanks
@user-yh1fz8ii5v Жыл бұрын
I broke and replaced the blade belt last year and it broke already. Wayched this video, saw what I did wrong and installed the new one in less time than before. Thanks for the help.
@D-MAN107 Жыл бұрын
Glad it helped
@boehning Жыл бұрын
Great video! Helped me out with a snapped idler rod on my mower. I wasn't sure how it was supposed to be installed and this was perfect.
@D-MAN107 Жыл бұрын
Glad it helped!
@sydschultzn.c.68034 ай бұрын
The video has great detail except in the beginning should show us how to remove the pen and the cable removed from the bracket. The whole video did help me. Thank you so much Schultz II
@D-MAN1074 ай бұрын
Noted
@Jaybird-oo3ih Жыл бұрын
Great informative video, I’d love to see one on the drive also looks a bit more complicated.
@D-MAN107 Жыл бұрын
Noted!
@charlesmarion2032 Жыл бұрын
Awesome camera work and explanation
@D-MAN107 Жыл бұрын
Thanks a lot!
@jimmulgrew364411 ай бұрын
Thanks very much for the video. Saved me a lot of time and money.
@D-MAN1079 ай бұрын
Glad it helped
@kristopherbell7158 Жыл бұрын
Man i had to replace all the belts on mone about a year ago, i learned as i went wish i had this vid!
@hellenruiz4497 Жыл бұрын
That's the belt for the blades. What about the drive belts?
@ZwithTheCutlass2 жыл бұрын
Man I needed this video, thanks!!
@lindaedwards19459 ай бұрын
Great teaching tool! Thank you!!!!
@D-MAN1079 ай бұрын
You're very welcome!
@randyjones42392 ай бұрын
Great video it was very helpful! Thank you!
@D-MAN107Ай бұрын
Thanks
@MarcosLopez-cu6ui3 ай бұрын
Gracias hombre🤜🤛
@1stormseekr3369 күн бұрын
Well done, and very helpful.
@D-MAN1072 сағат бұрын
Glad it was helpful!
@rexclay2231Ай бұрын
nice and easy $60 job , thanks
@D-MAN10716 күн бұрын
Glad it helped
@TTSOGRETRONАй бұрын
Thank you, exactly what I needed to know!!
@D-MAN107Ай бұрын
Glad it was helpful!
@frankbiddle7749 Жыл бұрын
Thanks that was a big help
@mrscorpio007ify20 күн бұрын
GREAT VIDEO!!! Thank you
@D-MAN10716 күн бұрын
Glad you liked it!
@DoucementDoggy4 ай бұрын
This video made it so easy
@D-MAN1074 ай бұрын
Awesome
@martinperez6187 Жыл бұрын
video saved my ass today thanks I appreciate it
@D-MAN107 Жыл бұрын
Awesome
@jackzuranski852 Жыл бұрын
Thanks great video
@D-MAN107 Жыл бұрын
Glad it was helpful!
@nanscott30922 жыл бұрын
Helpful. Thxs.
@andersonwilliam830010 ай бұрын
Awesome video
@D-MAN1079 ай бұрын
Thanks!
@glennfields8121Ай бұрын
Thank you so much for taking the time to make this comprehensive video repair. I always wondered how I might lift my mower to do this job myself and now I have a good idea. Very smart using a chain lift and lifting the rear of the mower where most of the weight is. How did you get it up on that work bench table?
@D-MAN107Ай бұрын
Glad to help
@paulmysliborski4832Ай бұрын
Great vid. Only thing I would add is to put a dab of anti-seize compound on the belt keeper bolt threads.........
@robertmcmahon27442 ай бұрын
Great video. Other videos have you take off the deck, not needed here. Also, you took off the belt cover and keeped it off to put the belt around the engine pulley FIRST , then around the blade pulley, putting the cover AFTER that. Other videos showed putting the belt around the blade pulley, putting on the belt cover, then struggling to put the belt around the engine pully. Your way gives way more space and room to do belt replacement quickly and easily. Thanks. As with other video creators that I learn useful stuff from, I'm sending a few $$ your way by using the "Thanks$" button above. I hope others will do as well to help you bring more useful content in the future. Peace out and God Bless.😎✌🖖🙏🤝
@D-MAN107Ай бұрын
Glad it helped
@chrisfrank84134 ай бұрын
Thank you so much.
@D-MAN1074 ай бұрын
No worries!
@christopherharris43003 күн бұрын
Saved me thNks brodie
@worddunlap Жыл бұрын
Thanks.
@codyw812711 ай бұрын
Have the same mower. Recently the thing has really lost power. I have replaced, upper trans belt, deck belt, fuel filter, air filter, cleaned the carb. New blade. Any insight on where my loss of power could be coming from? 6th gear feels like 2nd.
@keithtransue326821 күн бұрын
I have 30 in troy bilt riding mower looks like air line above carburetor came off cant find were one end goes
@JonFox7Ай бұрын
Thanks for this, It helped me see how I will be inspecting the belts and pulleys. My system stalls as soon as I lower the blade. Had a bent blade so I replaced it but it still stalls when lowering. I by-passed the switch with snap tie and the blade worked fine and the engine stayed on, it is only when utilizing the switch as intended, it stalls. I wonder why it is doing that?
@D-MAN107Ай бұрын
Glad it helped
@WALLY0652 ай бұрын
Thank you,, Would like to see a vid on replacing or servicing the blade spindle.
@D-MAN107Ай бұрын
Noted!
@robertmcmahon27442 ай бұрын
Thanks!
@D-MAN1072 ай бұрын
Thanks!
@1972faouzi Жыл бұрын
Thanks Much!!
@D-MAN107 Жыл бұрын
You're welcome!
@matthewcaldwell4254 Жыл бұрын
Thanks for the help! Got my mower fixed. Question for you. I had to add a manual valve to my gas line going to the carburetor. Is there a better was to prevent the gas from getting into the oil when the mower is just sitting? The valve works fine, just seems weird I had to add something that wasn’t from the manufacturer.
@D-MAN107 Жыл бұрын
Your carburetor needs replaced its leaking from the needle seat. Fuel valve is a bandaid for the actual problem but will work if you remember to turn it off every time.
@rafaeldiazus Жыл бұрын
Very good instructions. How many belts does that particular mower have and type?
@D-MAN107 Жыл бұрын
Thanks, just a deck belt and drive belt.
@soypinoy5251 Жыл бұрын
can u make a video on how to replace a drive belt pls
@belibalasfc Жыл бұрын
Hello! Would you be able to help me, I removed the Bracket Asm Brake a few days ago to replace another part of my mower. Now I can’t figure out how to put the bracket asm brake back on ? For my craftsman R1000 mower
@tommyhill7894 Жыл бұрын
I was doing this the other day and a long spring popped off. It looks like it came off of the brake rod. I think it's the brake rod extension spring but I can't figure out where to put it back. Anyway you could help?
@JohnZacharuk Жыл бұрын
Great video. I have a problem with the gear speed selector on my mower. After engaging the brake and releasing it the speed selector drops back to first gear all the time. Any suggestions? Thanks.
@D-MAN107 Жыл бұрын
Probably has a worn selector
@michaelg81504 Жыл бұрын
What is the lenght or part number of the new belt? Looking on the internet it seems to be a mystery. Thanks
@dickwillett348Ай бұрын
If possible could you show how to adjust Brake/Clutch pedal so it will lock in place.Mine wi8ll catch a little and then pop up.. Thank, Dick W.
@johnanddawnbuelow2014 Жыл бұрын
How do you get spring back on?
@mrscorpio007ify20 күн бұрын
Does the blade idler arm supposed to sit down in between that other piece of metal sticking up or is it supposed to move to the side when the blade handle is moved/engaged?
@ericblair2197 Жыл бұрын
Great video!! Consider a 3M Ryman notched belt & HD dressing ( I know, but a little dab' lol do ya? Quiet, smooth & lasts & lasts. Since 1994 on my 90 , 2 belts & lathe center lube on the bearings & engagement! 😉😀 , Working on the CLU-BRAKE0 ADJUST " to keep the front wheels down & my teeth fillings in? Any idea's 🙏 you've tried? Updated fuel to filters, "T" connectors & a dump valve ( Amazon kit) braided line & I can dump that " moonshine fuel & water" stabill it & go another year? That $23.00 a gallon can gas is obscene ( purt pumps are 70 miles a way & my friend at the airport retired , so no 135 pure octane to mix for a while. ( Got some at EAA this year 4 next but then : BIDUMB corrosives? Yet still a good tube👍
@eeepeeep520611 ай бұрын
I had to replace my lower drive belt on craftsman R110. The new belt came as a 35" instead of 35.25". Now it does not totally disengage when in netural. It tries to pull a little. HOW do I adjust this clutch issue? Thanks
@waltwhite1646 Жыл бұрын
Great video ! I have a 5 yr old Troy bit 30 R and will use this if my belt is shot ! ... need help or video on how to grease front wheels which have fittings but for some reason won't let a small grease gun let grease go in ??? Thanx
@D-MAN107 Жыл бұрын
The fittings are probably clogged with dirt
@TheTigolebitties6910 ай бұрын
They are not actually grease fittings. They are just solid plastic knobs that look like grease fittings. I did the same thing a while back but after installing 2 new tires found them not to be zerk fittings at all.
@davegillen8437 Жыл бұрын
how do you adjust the height of the mower blades , mine are too low, is there an adjusting screw ? Great Vid !!
@D-MAN107 Жыл бұрын
I that mower there is not much adjustment unfortunately.
@joedaniels95422 ай бұрын
On the blade pulley does the belt go behind the break
@user-wl8gp5yk4lАй бұрын
What is the part number of the new belt you installed? The parts websites are giving me different numbers. Thank you
@chadwaddell1212 ай бұрын
any way you could tell us how you jacked up the rear end to do this? I don't have a pulley or anything - just curious of a way to get it in the position you did for this video. great information btw- thanks for sharing.
@D-MAN1072 ай бұрын
I use a electric winch hanging from my ceiling. But anything can work or even a engine picker
@peterdenux387918 күн бұрын
I ordered a PTO Cable and it came with only one spring. My PTO Cable came with 2 springs like the one in your video. The new PTO Cable stated it replaces the old one, but the new one doesn’t work or have enough tension. Thanks for any advice. I have the same riding lawnmower.
@D-MAN10716 күн бұрын
Belt is wrong or cable is wrong.
@ajwilliams33 Жыл бұрын
Do you have the model number of the belt. I thought i did but the belt came too small. I have the r1000 as well and need roo chasms this exact belt.
@davemoss1188 Жыл бұрын
Thanks for the video please yo a drive belt one because that seems to be a lot trickier including as best as I can tell removeimg the deck belt first.
@D-MAN107 Жыл бұрын
Great suggestion!
@TheCottonTop23 күн бұрын
I just put a new blade on (used a 1/2 impact so I know it’s tight) and I’m sure it wasn’t in the exact spot on the star as the old one. Now I noticed (it could have been there before) a fluttering noise when the blade is engaged. It cuts great but I’m wondering if it’s a belt or bearing/pully issue, or if that noise is normal. The mower is about two years old, stored in a shed and only mows a 1/2 acre lot. Thoughts? And is there any PM that can be performed on the bearings?
@D-MAN10716 күн бұрын
Perhaps the idler pulley, or spindle bearings.
@bryanrussell87702 ай бұрын
The video is helpful but what if the belt is broken and not routed properly, can you show us how to fix our mower when the belt is gone or completely shredded? I have issues that your video didn’t help me with. Like the black lever you say goes up in the frame, mine has a spring and I see the spring on the one you’re working on, my spring isn’t connected to anything and luckily I see yours is mounted under the arm so I’ll see if I can mount mine like I see in this video, but that lever is connected to a pulley and that is also connected to a black piece of metal that has a rubber guide that rides inside the pulley for the blade, when I route the new belt like I see you do in the video the belt contacts that guide and it damaged my new bell I installed myself without seeing any video of on you tube. I fix cars so I figure I can replace a mowers belt, but I didn’t see that guide and didn’t know it was shredding my new belt until it shredded it. I’m getting my new belt today from Amazon so hopefully I’ll be cutting grass again soon. But I sure wish the video would show what to do if the belts failed, not a preventive maintenance video.
@bryanrussell87702 ай бұрын
Okay my belt just arrived and I installed it no problem and yes this video helped out greatly. I think my mistake on the first install was not making sure the spring the goes under black lever of the tensioner was installed correctly and it caused the tensioner pulley to be in a downward position and by that happening the belt was twisted and getting shredded. Thanks for the video. Now I need one that shows how to adjust the carburetor if there is any adjustments available.
@curtisrogers2910 Жыл бұрын
What about removing the whole deck shell? That video would be 🔥
@denisfeary94883 ай бұрын
Great video. Do you have on showing how to replace drive belts?
@JayMuzz-xn3rv2 ай бұрын
Lol same here
@JayMuzz-xn3rv2 ай бұрын
You find one
@raygoody4719 Жыл бұрын
Great Video. Do you have parts or brand name number for the belts you used?
@D-MAN107 Жыл бұрын
Yes
@Sky-rq1jk Жыл бұрын
I have a 30 inch R110/TB30 like in this video. My problem is the DRIVE BELT broke. I can't seem to find a video or detailed instructions on how to replace this belt. Any suggestions?
@D-MAN107 Жыл бұрын
I will post one on the next job that comes in
@rickybason9004 Жыл бұрын
I'm trying to replace the drive belts on the tb30r Troy Bilt riding mower. Do you have a video?
@D-MAN107 Жыл бұрын
Not currently but I'm sure we will
@RichWontor Жыл бұрын
my question is how can you raise/lower the cutting deck? Searches don't give me any help. My mower is set on the highest setting "level 5" but is still too close cutting, and setting 4 willl scalp and bog down the engine. I could use a 6 and 7 ! It seems the only adjustment is a hex nut facing forward to slightly raise the front of the deck. Any help out there?
@D-MAN107 Жыл бұрын
Not much adjustment on these mowers they are built very cheap
@KathieMoore134 ай бұрын
Hi! Really enjoyed this video, a HUGE Thank You! But am stuck, have a troybilt tbr30, my first belt fly off, am replacing it on garage floor. I do not have the strength to lift the back end, can only lower the deck to the lowest position. ANY suggestions please, from anyone out there, to get this new belt on the front pulley? Yep, a girl tacklin' it herself! Thank you in advance.
@D-MAN1074 ай бұрын
Good luck! It can be done on the floor like your trying.
@danaray-dw7ch Жыл бұрын
I got the pin off, but my deck won't drop. I can't pull it towards me enough to get it over the "arm" it rests on. ??
@jaybob15192 жыл бұрын
I just purchased this mower. It was working great until it would no move forward. I found a part of the belt broke. Would that belt stop mower from moving?
@Official_VehS2 жыл бұрын
no the belt he is replacing runs the blade. there's a different belt that runs the diff that powers the lawnmower
@D-MAN107 Жыл бұрын
Probably has a broken or jumped drive belt under the engine
@chrislewis7579Ай бұрын
craftsman2 ride-n-mulch 30' cut need the drive belt size
@jaxdrummer25 Жыл бұрын
I have the same mower... I recently ran into the problem where the engine dies when I engage the blades. It deos die immediatly. It will slowly putter for minutes before it either revs up and gfoes or just sputters out and dies. Once it dies I cannot start it again. Usually it will take a day before I can get it to start and when it does white smoke goes out of the exhaust. Its not the safety switch as I already had that. Any idea what that might be? I would like to know where to start looking on my own.
@D-MAN107 Жыл бұрын
Sounds like leaking fuel in the oil. Check oil see if smells like fuel.
@mikecunday8423 Жыл бұрын
Watch the torque on the 30 on the blades
@donaldbageant46473 ай бұрын
Great video, My gf son in law has one of these mowers, he broke the handle by the pully on the left side, what is that handle for?
@D-MAN1073 ай бұрын
Helps keep the idler pulley in line
@1buckola5 ай бұрын
I have an MTD 30" rear engine mower. how does the forward reverse shifter knob come off?
@D-MAN1074 ай бұрын
Pulls of or twist
@williamstrayhorn2824 Жыл бұрын
How to remove the engine on a troy bult 30r in rear engine riding mower
@rogerramirez61769 ай бұрын
Nice video. I got the same mower. My problem is with the brake for the blade. It doesn't move. Could use your experience and knowledge. The handle does not have any resistance when I engage the blade.
@D-MAN1079 ай бұрын
Thanks for sharing sounds like the cable is broken for the blade engagement.
@pshclass7 ай бұрын
I bought mine at a garage sale what is the part number for the belt and what's the part number for the blade on The rer 1000 30 inch deck mower
@roybray87412 жыл бұрын
My belt slip some when grass is tall does it need tighten or new belt u think
@D-MAN107 Жыл бұрын
New belt not adjustable
@duston1994 Жыл бұрын
I need a video on replacing the drive belts
@JayMuzz-xn3rv2 ай бұрын
Same
@Paula-pu6yc Жыл бұрын
I have the same mower and it won’t move back or forth. What do you think is causing this?
@D-MAN107 Жыл бұрын
Drive belt or brake stuck
@chadwaddell121Ай бұрын
does this mower have just a deck belt or is there another belt? I only see what appears to be the deck belt but manual says there are 2 or 3 belts?? thanks for any feedback
@D-MAN107Ай бұрын
It has a drive belt for transmission also
@KB1UIF2 ай бұрын
Hi, I have the Craftsmam version of this mower, r1000, what is the correct socket size and direction of thread for the blade. Thank you.
@D-MAN107Ай бұрын
15/16 socket regular threads lefty loose
@efrainrivera1207 Жыл бұрын
How do I adjust the clutch on this 30 “ lawn tractor
@D-MAN107 Жыл бұрын
Not really any adjustments it's all in the belt. If belt is worn needs replaced.
@stevemalek35223 ай бұрын
My tr30r won't go forward or backwards it happened 2 weeks ago any suggestions or help would be appreciated...thank you!
@D-MAN1073 ай бұрын
Drive belt is off or broken most likely
@jedsamppy3 ай бұрын
Can't seem to get belt on 42 inch weedeater riding mower
@gotman4409 Жыл бұрын
I have one of theses and the drive belt broke. I was told that it is a real pain to replace and that it was not worth repairing. So just how do you replace one ?
@D-MAN107 Жыл бұрын
It's not that bad really.
@paulzacher5672 Жыл бұрын
What is a broken spindle mount? Where is it exactly?
@D-MAN107 Жыл бұрын
It holds the blade and mounts to the deck
@renedanos88774 ай бұрын
What would cause the blade on a trobuilt tb30r to not disengage?
@D-MAN1074 ай бұрын
Belt to tight wrong belt or cable is rusted or linkage is getting stuck.
@MrNiceGuy500 Жыл бұрын
I need to replace the drive belt on mine….heard it is a real pain
@D-MAN107 Жыл бұрын
It's not to bad but it's tight
@patworthington3112 Жыл бұрын
Do you guys have a video on changing the Drive belts on the TB30? Thanks this video was great!
@D-MAN107 Жыл бұрын
Not yet
@StellingGDL Жыл бұрын
@@D-MAN107 yes please do
@whobeewhatee4 ай бұрын
That bolt that you called a "belt guide," I've lost it and can't find it for purchase anywhere using that description of "bolt guide." Any ideas to help me with the search? Thanks!
@D-MAN1074 ай бұрын
Lawn mower shop can order one. If not contact us.
@whobeewhatee4 ай бұрын
@@D-MAN107 alright, thank you
@rp-pk7hs Жыл бұрын
I still can't get the blade to engage. Where in the world does the Black on the Belt tightner go. I don't se a function for it but to pull down on the drive belt. Not very7 strong. I checked the PTO cable, iT IS TIGHT WHEN i LOCK IT DOWN. aNY HELO WOULD BE APPRICATED.
@D-MAN107 Жыл бұрын
Not sure what "black" your referring to?
@jake0309833 ай бұрын
What’s that belt size. Online it says 43.5 x .5 but it’s to big
@arturb465810 ай бұрын
My belt keeps coming off, would replacing it fix the issue? Thx
@D-MAN1079 ай бұрын
Possible but may have other issues
@user-hk1dz2bg1p Жыл бұрын
How to adjust the belt?
@Aaron-yu9vp Жыл бұрын
I have this exact same mower, and it dies whenever I engage the blades. Runs perfectly fine when blades are off. Is this the belt I need to replace to fix that issue?
@D-MAN107 Жыл бұрын
Sounds like the safety switch on the side discharge check to make sure it's being pressed all the way.
@TSyoyo11 ай бұрын
Did you ever figure out what the issue was? Mine doesnt die but it seems to bog the motor down and it shakes a bit. Runs perfect without the blade engaged though.
@edward.billue518 Жыл бұрын
I have a Troy riding mower. I left it sitting for two years brand new or you all work and no return over but won’t start someone say I need to dump all the gas out and clean the carburetor. I don’t know can you help me
@D-MAN107 Жыл бұрын
Sounds like the carburetor needs cleaned and fuel system flushed.
@gregunigg76192 ай бұрын
What size belt is that ???
@Slevinlobell10 ай бұрын
Hey man, great vid. Subbed. Can you PLEASE help me, that little tensioner bar with the black like plastic end on it, the bar that is attached to the idler pulley, that somehow sheered off in half and I can't find the part anywhere or exact name of it. It's the chrome bar like 6 inches approx long with a 2 to 3 inch like black plastic/hard rubber end with 1 screw and thr very end of it bends in and sticks into the idler bracket, the black end sits against the mower I think. You know what I'm talking about I'm sure. I have to get this mower working asap, thanks a ton man!
@D-MAN1079 ай бұрын
We can order one just call us at winderoutdoorpower
@Slevinlobell9 ай бұрын
@@D-MAN107 will do. Prob needs the whole idler pulley assembly I'm guessing and not just thr bar. I can post a pic of the broken part on your social media if that helps too