308L Stainless Stick(SMAW) Welding / Vertical

[@kimchiwelder8410]

Please watch it in high definition!🔥 Don't forget to subscribe and like👍👍 Enjoy my videos, Thanks😎😎

[@anong8941]

Can you make video 6GC smaw&fcaw..root&hot pass smaw…fill&capp fcaw

[@kimchiwelder8410]

Hello, anong 89 I'll include it on my list!😁

[@anong8941]

@@kimchiwelder8410 tq..im your big fan from malaysia...

[@kimchiwelder8410]

Thank you! anong89 😁😁

[@anong8941]

@@kimchiwelder8410 i have a question..what is the estimated amp needed and wire speed needed to make 6G fcaw welding..fill pass and capping

[@peterbarnett4082]

Cracking video and welding work 👌

[@mihailobaosic9147]

Very good job Kimchy, thanks for video😎🙂

[@kimchiwelder8410]

Thanks for watching, Mihailo Baošić!! 😎😎

[@theshit1209]

Same amperage for stainless plate ?

[@Slagithor9000]

Why 60amps? I’ve been on 84 for vertical and 90 for everything else with 3/32 309L-16. Is it because it’s stainless to stainless with 308? Just asking because I ran some beads with 309 on carbon steel and it looked good so my company let me do 2G, 3G, and 4G carbon steel to carbon steel and it shot X-ray so now I’m qualified to weld stainless and I’ve never actually welded any stainless other than the 309 on carbon! I just wanna make sure I know somewhat what I’m doing before I get on some actual stainless. Thanks for the video! Your welds look amazing!

[@magnusnielsen2648]

3/32 309 has an amp ran ge of 40-80. maybe you used 1/8

[@CarlosHernandez-ij7pl]

Woow 🎉🎉🎉❤❤❤😮😅😅😊

[@kimchiwelder8410]

Thanks for watching!😁👍

[@WelderB1Family]

Well done 🔥

[@kimchiwelder8410]

Thanks for watching! 😎😎

[@missagavia2746]

Does anyone has done the same test with inconel (ENiCrFe) stick welding rod???

[@hamzahal-hams7970]

That's Carbon Plate ?

[@theshit1209]

is that stainless plate ?

[@kimchiwelder8410]

Hello, ClaAsified ! No, Carbon plate and E308L Stainless rod!

[@theshit1209]

@@kimchiwelder8410 why?

[@theshit1209]

308L 1/8 heat?

[@kimchiwelder8410]

Hello, ClaAsified 90~120 It depends on position, Thanks for watching😎

[@theshit1209]

@@kimchiwelder8410 308 1/8 vertical heat? 90?

[@haroldlibando8574]

👍

[@kimchiwelder8410]

Thanks for watching!😎

[@i_9_power_allah321]

That weld will fail, since when you keep welding over top of slag with stainless?

[@kimchiwelder8410]

I'll try to upload better welding quality videos! Thank you for your interest😁👍

[@nocryers1173]

​@@kimchiwelder8410 would absolutely love to see 309 stick 3/32 in the 6g position on 2" heavywall

[@nocryers1173]

scd 160

[@lonemeow0830]

I was like the heat tint just gone easy when I had it in my stainless plate with chromium it did not disappear. Just to find out in the comments that it is a carbon plate 😅

[@Haems10969]

3G please

[@joecoxwell917]

You are stepping up too high with your rod. And your weld is too eide for a 332 rod if you think you are good do that with a 1/8

[@quintenhegstad2026]

That’s carbon steel😅

[@dwaynerudkavitch5307]

5G schd 40 4 or 6 inch pipe like to see that. no rolling

[@tiagoprates3406]

👍

[@kimchiwelder8410]

Thanks for watching!😁👍