32 Ingenious Secrets & Tricks You Will Use Everyday That Work Extremely Well

[@ramazandoekmeci8528]

Thank you very much for the valuable compilation!!!

[@creationholic101]

Glad you enjoyed it!

[@ronmit-p5g]

never seen someone suck so bad a using a drill

[@mgconseils-astuces-sante9478]

Thank you for this video. What liquid you pour on the backing soda ? THANKS

[@creationholic101]

cyanoacrylate adhesive glue

[@halcyform9161]

A lot of good tips, but you will want to consult an actual electrician to see if you can get away with some of the wiring shown here. While stranded conductors are more forgiving, there are bend radius restrictions based on size of conductor. Don't think you can go bending conductors however you want and think you won't run into a problem at some point. Additionally, you do not want to knot conductors. This will create a hot spot which can start a fire. Conductors are routed (and spliced) the way they are for a reason. Lastly, if you are having a problem with a plug, replace it with a listed one. Inside that plug where the terminals are is a seating surface that the screws tighten onto the wire and keep it in place. If the wire keeps slipping out, it means the plug isn't working properly anymore (or it was garbage to begin with) and you have loose connections. Loose connections means possible arcing, heat and eventual failure of plug and then - possible fire.

[@creationholic101]

Welcome to Creation Holic channel! What you say is very true! If you have any other ideas or solutions, feel free to share them with me! Wish you the best!

[@Eversor86]

Yeah, any sensible electrician will laugh at you if you tell him the #14 tip. There is just to much "lose" there for potential fire start. Twist like the one marked as bad + a wire nut, or use dedicated stuff/terminals. If you need to do it spartan way and are scared stuff will get lose do the "bad one" and then bend the "naked twisted" part down and then tape over it, but frankly half the tips show soldering iron - solder shit if need be.

[@ReyhanWoke]

berguna bangat ini

[@billnlpaw]

OMG…. what’s with you people. You afraid of your shadow too?

[@pepe6518]

a hot spot where the diameter is doubled?

[@IrmaPeres-q9p]

Excelentes trucos son muy necesario gracias por compartir

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@kw0s]

21:43 Use another piece of wood or metal to spread the load. 22:50 #28, what's in the tube? Latex caulk? 26:00 Use needle nose pliers.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best! 22:50 clear silicone

[@darkori1]

Finally i find this type of video without music at all. Thank you so much

[@creationholic101]

Glad you liked it!

[@gonegolding]

Have you gone deaf? There's music all the way through the video. Gladly it's not loud like most of the others because this one knows how annoying that can be.

[@globatraglobatra6472]

​@@creationholic101😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😢😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮❤❤❤❤😂

[@enriquenerirodriguezdiaz73]

Pues supongo que le quitaste el volumen, por que este tipo de tonterías siempre viene acompañado de una música igual 🤷🏻‍♂️

[@DIYTrends95]

@@enriquenerirodriguezdiaz73 omg

[@manuelalbertoponce7888]

Es simplemente una recopilación de las muchas cosas que se encuentran en las redes, de las cuales muy pocas son útiles o prácticas....

[@stubbornnurse8126]

I bc wandered during times of cleaning my paint rollers like u showed for creating power. Just turning a roller w a water hose could create such energy. Thus as a water wheel turning a grinder. Each home could bc a system using a continued pressure water turning a wheel or roller creating energy. Reusing the same water over and over. Replacing little water over time.

[@creationholic101]

Glad I could help

[@MartinLeon-bn3pe]

Saludos cordiales y muchas gracias por compartir muy buenas ideas, de Abasolo Guanajuato México

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@salvadorbenages1750]

Me considero un "manitas" bastante experto, pero he visto en este video trucos muy prácticos que desconocía. Es un video muy instructivo. Gracias.

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@inventorK20]

*The amazing idea !* 👍

[@panaispeteinos427]

Its a very good idea!!! 9:41

[@creationholic101]

Thank you! Cheers!

[@IssamuAono]

Utilíssimas dicas! Enriqueceu o meu repertório de ideias.

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@alvarovelascomichel8191]

Es a😅​@@creationholic101

[@LUCKY_ADVENTURE73]

Cerdas.. Saya dari Indonesia & terimakasih atas subtitle dalam bahasa Indonesia. Saya akan menonton sampai akhir video luar biasa ini.God Bless You

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@vilitogencheva4165]

Чудесни идеи! Благодаря за видеото! Поздрави от прекрасната ни България 🌹🇧🇬😊

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@ebrahimi_shahin]

It was very informative and useful, thank you ❤

[@creationholic101]

Glad it was helpful!

[@CreativePassion88]

great

[@Eversor86]

#24 - If you wanna risk getting electrocuted - then test burnt diodes that way. Most LED bulbs aren't really isolated and there can be full AC "available". Also just shorting burned led will either just bring back the bulb to live for a short period of time if its capacitive dropper style (cheapest) - cause one less LED changes ratios and the rest of LEDs will get higher current + they already are "old and used". If its current drive circuit then such a fix will reduce brightness/power, and bring the bulb back to live till next LED dies of old age. #27 - Just use anything - small wood piece, a newspaper, old telephone/credit card - no need to waste time on making a "glue cap" which will probably fall off in first try. #29 - Ah yeah - a trick of using a tool how the fucking manual tells you too - now this is such an ingenious secret/trick. Tell me how to do that on a cheapo jig-saw that doesn't have angling ability.

[@creationholic101]

Thank you for sharing your feedback. Have a good day!

[@landuong5603]

Rất tuyệt vời! Tôi thích những cách làm đó. Cảm ơn bạn đã chia sẽ. Tôi đến từ VIỆT NAM.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@muriloguima]

Excelentes truques! Parabéns pelo talento!

[@CraftivityZone-123]

I’m really impressed with the variety of tips! From sharpening knives to keeping LED bulbs functional, every idea feels so practical. You’ve made DIY projects much more enjoyable for me. Thank you for sharing!

[@creationholic101]

Glad you like them!

[@sudaryogejleg6210]

Idenya sangat hebat terima kasih berbagi ilmunya

[@creationholic101]

I am glad you like this ideas. Wishing you all good things! "

[@Quacks0]

23:00 For those of you who don't live "across the pond", "white spirit" is mineral spirits or paint thinner. I Googled it so that you all didn't have to. You're welcome. :D

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@Tom-575]

افكار حلوة وتستحق الايك والتعليق

[@creationholic101]

Thank you! Cheers!

[@freedzeed1346]

Często przerobienie czegoś jest dwa razy droższe niż kupienie narzędzi lub materiału dopasowanego do danej pracy😊😊😊

[@creationholic101]

Yeah true. But sometimes it's very cheap compared to buying new, or it's souvenirs that can't be bought new

[@อารอฟัตโซะเลาะ-ฆ5ภ]

😊😊

[@Jody600]

J'aime te regarder, j'apprends et je ne peux plus m'en passer. Merci Holic.

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@muriloguima]

Aprendi muito com estas dicas. Sempre faço todo conserto em casa mesmo, exceto quando impossível.

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@dubmob151]

I might try the hot glue thumbscrew, might be good for light duty tightening. Maybe melting plastic into the box wrench form would be possible to get higher strength than the hot glue.

[@silvanasil5415]

Agradeço as dicas, direto do Brasil.

[@Maciejka1955]

Przydatne pomysły do zastosowania. Polska m. Warszawa 😊

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@frankieb.fernandez79]

I'll assume you know the price of a tiny bottle of super glue. Right? 🧐

[@creationholic101]

cyanoacrylate adhesive glue

[@xandersons]

geil! Die Nagel Plastik Reparatur is einfach genial. Aber auch die Natron Sekkleber Lösung merk ich mir. 👍🏻

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@greenfox1614]

I switched off immediately when I saw what had been done to the cables at the beginning. Please don't do something like that, it can quickly lead to a fire.

[@anthonyscinocca4380]

Please explain???

[@creationholic101]

Can you share more information about this issue?

[@fauxque5057]

It's the proper way to join wires before soldering, so I don't see why you couldn't do it that way without soldering and a little heat shrink

[@iliasvor2728]

Οχι😊

[@babaoreally8220]

Its proper name is a telegraph splice.Been used by the military for ever to repair or extend land lines of communication.I’ve used them along trench lines to connect perimeter bunkers to unit command in Nam.Radios were used in the bush and telephones used in LZ’s,Fire Bases,and unit compounds.Splice would be safe,but stranded wire is not used for residential construction anyhow.In old knob and tube residential systems(30s-40s)wires coming into the attic were T-tapped onto the line in a similar fashion and were soldered and friction taped.

[@vladasokunevas8142]

Scraping silicone seams with a finger - stone age and paint does not stick to silicone.

[@Alejandro-nz7mu]

Me llamo Alejandro .soy d Cuba .

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@СергейГоков-н4ч]

​@@Alejandro-nz7mu111ЯЯ́я́я́я́😮у

[@MauiuuVbnbvvb-rl2dw]

مليح

[@KienNguyen-ki1so]

Great.thanks ad❤❤❤

[@creationholic101]

Thank you too

[@NasaInventions20]

These are such cool ideas! I always have plastic bottles lying around, and now I’ve got a ton of ways to repurpose them.

[@creationholic101]

Glad you liked the ideas! Repurposing plastic bottles is a great way to be resourceful.

[@arezkiallouche6956]

Merci pour toutes ces belles astuces

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@mokhtarboutaa8375]

C'est tout simplement génial. Merci

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@kennethjensen7553]

Fine work from Denmark.

[@Beerwalla1]

I will used these tips every day, apart from the days that I don't, which will be every day.

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@timnic9242]

genau diese Tricks wende ich jeden Tag an 😄 😄

[@creationholic101]

I also did not expect the effects it brought

[@satriyo31]

OMG, that's an advantageous solution... THANK YOU

[@creationholic101]

Glad it helped!

[@danyaleskandari6393]

Sehr Kreativ mein Lieber. Hat Spaß gemacht zuzusehen. Danke für die Inspirationen.

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@bellslinethriller]

Brilliant! captivating. Thank you.

[@creationholic101]

Thank you! Cheers!

[@pierluigigiorgi1384]

Bravo, quasi tutte eccellenti idee!

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@ณัฐณิชาแพะทอง-ฎ6ร]

ขอขอบคุณสำหรับการแบ่งปัน 😮😮😮

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@Lacarambada]

Excelentes ideas! Muchas gracias! Qué tipo de "súper pegamento" usas con la soda que se endurece?

[@creationholic101]

cyanoacrylate adhesive glue

[@CreativeHop]

This video is really awesome! I am impressed with your creative inventions.

[@creationholic101]

Thank you! Cheers!

[@BHK_DIYAtHome]

wow, many good ideas, thank you

[@creationholic101]

Glad you like them!

[@محمدپارساسلطانی]

thank you, this is very professional:

[@creationholic101]

Glad you like them!

[@양점선-x3l]

안녕하세요 이영상을 한국에서 보고 있어요 유용한 팁은 정말 도움이 됩니다 뛰어난 소수성코팅 만드는 방법에서 재료는 실리콘과 알코올비율이 얼마나 되나요?

[@creationholic101]

1/5 ratio

[@primera1ra385]

From Cartagena (Spain) following you ... thanks a lot

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@joaquinsablan5406]

Love this video !

[@jeromerouet7014]

excellent from France !!!!👍👍👍

[@creationholic101]

Glad you like it!

[@bernardvanhaesebrouck527]

Merci pour toutes ces astuces, je viens de France

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@سفيانشاربي]

جزاكم الله خيرا عيدكم مبارك إخوانك من الجزائر

[@creationholic101]

Thank you for watching

[@Xonja-ds5bl]

Great👍👍

[@creationholic101]

Thank you! Cheers!

[@YAHYA-s8m]

انا من المملكة العربية السعودية سعيد بمشاهدة محتواك الأكثر من رائع

[@creationholic101]

Glad you like them!

[@thanhtruong-g4q]

Thanks! I LOVE YOU!

[@creationholic101]

Thank you! Cheers!

[@manuelaugustosanchezgranda368]

Gracias por tan sencillos y útiles tips......

[@hunter021976]

its worth the time, thank you for sharing!

[@creationholic101]

Glad you think so!

[@BungTomo-nh5sg]

Saya dari Indonesia 🇲🇨 trimkasih telah memberikan ilmu untuk saya👍🙏

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@THANHCONG88TN]

It's very good and highly professional. Congratulations.

[@creationholic101]

Thank you! Cheers!

[@Meti_Music]

Good job 👍👍👏👏

[@creationholic101]

Thank you! Cheers!

[@lightsteffi1955]

Great 👍

[@creationholic101]

Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

[@olegmoisei4105]

Спасибо за отличные трюки,умелые хитрости очень пригодится в хозястве привет из Молдовы!!!? 2:04 2:04

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@TheA-y4b]

Very great I can use it in my daily life. Thank you

[@creationholic101]

You are most welcome

[@LukaTricks68]

You are very skillful, I am also trying to practice some tips that you have instructed. Does anyone else like tip number 8 like me?

[@creationholic101]

Glad you like them!

[@vuvu3401]

thanks!

[@creationholic101]

Welcome!

[@MedSou]

❤❤❤ . . 👇 *You’re amazing,I hope you have a great life with a lot of happiness*

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@quochungnguyen1910]

Nhiều ý tưởng, hay quá bạn ơi

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@teetoot2]

One of the best I have seen 5 stars

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@tybritt1]

Alot of good ideas.

[@creationholic101]

Thank you! Cheers!

[@VahanToroyan-zx4ed]

Տեսանյութը լավնէ , բայց թարգմանությունը աղավաղում է հայերեն լեզուն ,դրանով քչանում է լավ տպավորությունը։ Շնորհակալություն!

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@abrahymhsnalqsab5613]

Very good Thank you very much

[@creationholic101]

So nice of you

[@AndresKunizawa]

Excelente! Muchas gracias! Saludos desde Uruguay!😂

[@dedejohann]

From Brazil. Good one guys.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@carlagoncalves1589]

Amazing. Thanks from Portugal

[@creationholic101]

Glad you liked it!

[@パパさん-h7w]

この、ポンドにかけてる粉はなんですか？

[@조범규-y6e]

감사합니다. 끝까지 영상을 감명깊게 감상했습니다.

[@creationholic101]

I am glad you like this ideas. Wishing you all good things!

[@liyuetyee]

Very smart thanks sharing

[@creationholic101]

Thanks for watching!

[@StefanMegerleEbendorf]

Super toll, danke für das Video.

[@creationholic101]

I am glad you like this ideas. Wishing you all good things!

[@ulrichkesselring85]

Amazing and useful*

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@electroonext]

Amazing!

[@creationholic101]

Thank you! Cheers!

[@MachineryTech-Media]

love it 🥰🥰

[@creationholic101]

Thank you! Cheers!

[@김일두-c9s]

Very good -thank you !

[@creationholic101]

Thank you! Cheers!

[@hgn2217]

Ingenious !!!

[@creationholic101]

Thanks! I'm glad you found it ingenious.

[@GmoLatorreSierra.Endocrino]

Soy de Medellín (Colombia), excelentes todas sus enseñanzas. Gracias por su generosidad al compartirlas.

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@marbzirc376]

#2 was clever. Thanks!

[@creationholic101]

Glad you liked it!

[@DjsoundPro94]

Muy buenos inventos e ideas 👌

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@metincaliskan8181]

Güzel bilgiler teşekkür ederim manisa

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@alexnovique1718]

I'm impressed.😉

[@creationholic101]

Glad you like them!

[@joserubensdepaivareno8653]

EXCELENTES IDEIAS.. PARABENS

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@nathalievande2040]

Merci, je viens de m'acheter un fer à souder pour réparer mes choses brisées. Et aussi de la colle crazy-glue , qui doit être la super colle je pense.....

[@creationholic101]

cyanoacrylate adhesive glue

[@abonasser554]

شكرا على الأفكار الجميلة والمفيدة

[@creationholic101]

Thank you! Cheers!

[@SouthernMz]

Thank you Very useful tips From U.K.

[@creationholic101]

Thank you for your kind words! Glad these tips will be helpful for you.

[@JerryThompson-k1g]

#28 - Is that clear caulk that you are mixing with the mineral spirits for the waterproof coating?

[@CurtisGrinnell]

this wire solder trick looks like a good idea

[@creationholic101]

Glad you like them!

[@777Cano777]

Excelente muchas gracias por compartir 👌

[@creationholic101]

Thank you! Cheers!

[@MusaYILDIZ]

Çok başarılı 👍

[@creationholic101]

Thank you! Cheers!

[@ayahandaabunafisaal-malawi8254]

Penang Malaysia 🇲🇾👍🏼

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@eliecercastro1929]

Excelente trucos muy necesarios en nuestra vida diaria un saludo muy especial aquí desde Panamá Centroamérica Mil bendiciones para todos 🙏🙏🙏🙏

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@joesmith7420]

thanks

[@creationholic101]

Thank you for watching