326. Ripping out the wiring in my boat

[@alangood8190]

Don't underestimate the entertainment and educational value of the episodes you might think 'mundane' to us viewers because they're far from it. Such fathoming and sussing out is part and parcel of projects like these and we're along for the ride just as much as you are.

[@CruisingTheCut]

😀😀😀

[@brianlopez8855]

yes I think thats it.

[@flaagan]

Agreed. If nothing else it shows the amount of work it takes to gets things properly sorted, and can be a real eye-opener for folks thinking of doing these kinds of projects as to just how far down the rabbit hole can go.

[@ChrisBrummitt]

I'm very much in the 'let's think about it for a couple of days before we do anything we might regret' camp, which is why I enjoy watching your 'let's just see what happens if...' vlogs!

[@iainlyall6475]

@@CruisingTheCut also i'm trying to cut back on my drinking, so you're the next best thing 🙂

[@squireson]

For some of us, the _boat project_ videos are the most interesting. Keep on keeping on !

[@davidwatkinson7552]

Hi David, the strange two holed thing in the dashboard is, potentially, a small 12v indicator bulb devoid the element and glass cover. Otherwise known as a smashed bulb. Please do carry on with this video series, it is enjoyable to watch and gently informative.

[@CruisingTheCut]

Ah, good shout. I will remove it and cover the hole.

[@darylwilliams7883]

Exactly what I though, I've seen bulbs with skinny little wires sticking out the bottom.

[@Scodiddly]

A socket for just a bare LED?

[@dougwilson4537]

@@Scodiddly Originally probably would have been a LV incandescent bulb. Either friction fit, or with a plastic or glass cover. Can't really tell, with the bezel looking a bit beat up. As David Watkinson said above 'otherwise known as a smashed bulb'.😄 You probably could fit bare LED leads in there, but with a resistor fitted to one leg. Easier to remove it, and cover it up, or put in whatever type of new indicator you might need. I'm waiting to see if the switch/fuse panel even has enough room in large panel, to be mounted vertically. Hard to gauge the size in the video, but I think that may be why the previous owner, mounted it horizontally.

[@davidpreston9909]

@@CruisingTheCut Strikes me that it might have been a 'power on' indicator that showed that some past version of the electrics was live, if there was an isolator near the battery.

[@camdenmcandrews]

Speaking as a retired aerospace engineer: tidy wiring is a thing of beauty! :D

[@CruisingTheCut]

Yes! Though whether what I do will actually be any better is another matter entirely.

[@chrisv9414]

i've been watching your videos for a few weeks now, and i just wanted to say, they give me such a calming feeling, as if im with an old friend who i can just listen to. i've been struggling with mental health most of my life, and some days are better, but the days when it's worse i tend to fall back into harmful behaviours. but watching your videos has proven to be one of the ways to just get back on track and dont fall into a mental hole, they give me a sense of stability. i dont know if its your pleasant way of talking or your decelerated style of video making, but if you read this, be sure you made many of my days better.

[@CruisingTheCut]

Thank you. I'm sad to hear you've struggled so long but it's good to know that you can find things to cheer you up in your life whether it's my videos or anything else. I hope you can continue to focus on those sources of joy and anytime you're down, turn to them for comfort. Best wishes, David

[@chrisv9414]

@@CruisingTheCut thank you so much!

[@nicktdm5703]

Anyone else just find themselves smiling all the way through...? It's like the feeling you get when someone you want to succeed, trips up and then recovers it with a little jig... You sir are a class act. I love it!

[@marj1585]

I sometimes laugh out loud. Those comments to camera are hilarious.

[@edwardmyers8782]

Minor problems all of it

[@tbone750four]

All we ask is, just don’t stop being you. (Long time fan of cruising the cut from Auburn Indiana U.S.A.

[@jackiepersing-hy3lo]

Ditto….from Sturgis Michigan…love this guy

[@brucefay5126]

@@jackiepersing-hy3lo Yup. Brighton-Howell part of Michigan.

[@jhertz89]

Albuquerque NM USA. Been watching for a long while.

[@davidsmith-ih2kk]

I totally agree with your comment, David's broadcasting skills are very evident in his channel.

[@lapsedluddite3381]

Of course we were watching, that was fun! There is nothing quite as enjoyable as messing about with old boats, solving electrical mysteries, and marveling at the previous owners skill level (or lack thereof). Thank you for taking us along!

[@davidsmith-ih2kk]

I agree totally........

[@adrianheywood]

Honestly, I have no idea why is sit watching your videos with a silly smile on my face - it's inexplicable. But i just bloody love them! Thanks for sharing David. :)

[@CruisingTheCut]

Glad you like them! 😀😀

[@davidpiper3652]

This is what I am here for: random wires, velcro, and stuff! More please!

[@CruisingTheCut]

More soon!

[@shm5547]

I think that wiring is known in the trade as "a fire hazard" 🤣

[@rotinkerbell]

I adore truly the gentle nature of your films. All of the excitement of a childhood episode of "On The Riverbank." Thank you.

[@julesmlowe]

NOT boring at all. It's a fascinating voyage of discovery The only thing missing is a cup of tea and a cheese sandwich ....

[@mountainclawoutdoors]

Yes, we could stand to see the cheese sandwiches They are comforting to see Don't know why

[@nicolaifr4905]

It is always fun as an electrisian so see old and wierd homemade systems, and with great naration to boot😊

[@thomasfrench2012]

I guess you can call me a nerd, as I am thoroughly enjoying the exploration of what-does-this-wire-do-if-anything?

[@davidsmith-ih2kk]

Totally agree with your sentiments......

[@Trevor_Austin]

Your combination of content, presentation and humour makes this really watchable series.

[@davidsmith-ih2kk]

I agree totally, you show good insight into David's channel....

[@andrewdolinskiatcarpathian]

Hi David. Despite what you said, it has been gripping. Watching you tackle the spaghetti nest of wires was fascinating. Good luck. 🥴

[@CruisingTheCut]

Thank you

[@Robutube1]

Agreed!

[@johnb4183]

Had enough? Time for a cup of tea and a biscuit! Cheers !

[@sianwarwick633]

Time to line up in which order all the jobs are going to be done

[@Project_Servotopia]

@@johnb4183 don't forget the cheese sandwich!

[@donclay3511]

Painful? NOT! Enjoyable yes. I enjoy journeys like this. Carry on!!! You're making this boat your own. :)

[@CruisingTheCut]

That's the plan!

[@GregVirgoe]

TOP-TIP.... leave the white flexible conduit in place with one of the old wires as a drawstring to give you a future cableway through the boat. You can simply pull a new cable through the existing conduit using an old cable to do so.

[@colinhoughton9373]

Nicely done David. Winging it with electrics can be unnerving for some. I have been a prototype wireman and I love the challenge of the deciphering. It can be laughable at times with what one finds but the satisfaction of the finished effort will always earn a toast with a cup of Earl Grey. Just don't fall for the 'turn the boat upside down to lay the carpet on the ceiling' prank. Love the videos, keep them coming in the current format. Education and humour can work together.

[@CruisingTheCut]

You know, I quite like that plan for the carpeting!!

[@t1n4444]

From what I can see from phone screen the carpet is fixed to a hardboard "substrate" or "armature" sort of thing and makes the "carpeting" much easier. It may be a plan to carpet over the carpet and thus gain about another 4mm of insulation🤪

[@5park5]

The flimsy crosshatched wood is called hardboard. Enjoying this very much.

[@clearprop]

Just wanted to join the throngs of approving viewers! It's interesting to join you in figuring out what is what as the refurbishment begins. Keep 'em coming, David. 👍😁

[@SD-xs3py]

The kind of nerd you are is also how a lot of us are; and that's exactly why we are watching. Don't change!

[@henrywilliam8506]

Great Vlog David, I was a VJ for over 20 years for a national broadcaster in Australia. One of the most important interviews I had and I forgot to turn on the microphone. At least there’s one bright spark on your boat! 🤣🤣

[@CruisingTheCut]

Oh no!!!!

[@craigw.scribner6490]

"Wire" we watching these videos? Because David makes them interesting and fun! Thanks, David!

[@CruisingTheCut]

Glad you like them!

[@lapsedluddite3381]

...insert appropriate "pun groan" here... 😋

[@michaelhill9700]

Having done a number of these projects, the "forensic" wiring discussion is comforting. I now know I am not the only one with the self-conversation of "Now what's this bit?" or "Where does that go? NO WHERE!"

[@marysemaryla8797]

Not boring at alll and your voice is, well, beautiful. Never tired of hearing it. Cheers from Québec, Canada

[@dazedandconfused698]

That wood is Hard Board, also known as Fibre Board. Usually chequered on one side and smooth on the other

[@CruisingTheCut]

That's the stuff!

[@johnnyzander1466]

As a piece of useless information, I can add that here in Sweden it is called ''Masonite''. Good material as long as it doesn't get wet. 😁

[@slots1407]

@@johnnyzander1466 always called it masonite myself. No idea where the name originated, but I learned it from my late father.

[@davidpaxton4879]

Some sad technical info. I was European technical product manager for Masonite. An American company. Mr Mason invented hardboard (which is what the thin material in the roof is) in the 1920s in Laurel Mississippi, hence the name Masonite. You can tell hardboard from thin MDF by the crosshatch pattern on one side. The crosshatching is a result of the wire mesh used to allow water to escape in the pressing process used to make the hardboard. In Sweden hardboard was manufactured under licence, using the American Masonite process. Masonite is a generic name for hardboard in Sweden and many other areas, just like Hoover is a generic name for a vacuum cleaner. Sorry about the long geeky explanation, it’s not often I can show off my boring knowledge of something. 😊

[@CruisingTheCut]

That was very interesting! Cheers!

[@dylantrinder1571]

David, please don’t stop what you’re doing. In spite of your doubts we do find it interesting and enjoyable. Thanks for sharing.

[@CruisingTheCut]

Thank you, I will

[@decaf4me2]

I love how you generally ignore the Chesterton’s Fence admonition to not remove or change something until you understand why it was put that way in the first place. Ignoring Chesterton is an effective way to generate new adventures. 😁 BUT you figure it out, and that journey is most of the fun. Love your tone and sense of humor. Cheers!

[@Joe-lb8qn]

This is the nautical equivalent of starting to peel off a bit of wallpaper and then youve done half the room and you're committed. Id be tempted to take it all out and start from scratch

[@CruisingTheCut]

That's what I am doing!

[@stevenorton3671]

Ooh perhaps we can have some more exiting 'checking if the towel is slightly blue'.

[@simonevans8979]

Cynic. I like a bit if towel-checking meself.

[@LOTPOR0402]

Is that sarcasm ?

[@tbone750four]

This made me laugh my butt off. I assume this was sarcasm anyway

[@munchkinheaven]

I think another rear end view would have lifted the whole vlog! Shame there was no bending down!

[@annkauffold7049]

I have no interest whatsoever in DYI myself but totally enjoy watching you do it.🙂

[@CruisingTheCut]

Cheers!

[@sianwarwick633]

Had partner who loved wiring. Would've adored this

[@SuperFredc]

David, although you think we may somehow be bored by your endeavours, that is so much further from the truth, that you can imagine. I have to say watching your narrowboat escapades got me some way through Covid. This episode was as much interesting, as it was humorous. Please keep them coming, I await with excited anticipation. Regards.

[@nkiey]

David, this is by far the best content on the whole of KZbin. Please keep it coming!

[@CruisingTheCut]

🤣🤣

[@scaletownmodels]

When I'm doing my daily work as a programmer I'll often popup content like this in a side window when I just don't feel like playing music. Your pleasant narration on your videos is quite soothing, makes you feel a little less alone (I work remotely) and doesn't demand your attention in a good way. Of course the first time I watch one I'm focused on it. Since we don't have a canal system in the US like yours, I find it endlessly fascinating. I'm lucky enough to have a workshop with a fair bit of kit and so I watch quite a bit of project based content. Interesting seeing how people handle challenges with fewer tools. You do get a bit spoiled.

[@fraserbrown7502]

Making me jealous. I would love a wee project like this. All the weird issues to fix. What a treat.

[@B26768]

We are here because you are interesting and honest. Don’t change; it’s all good.

[@M0LHA]

You're saving me a fortune David! Keep putting me off, it's for the best. Like my mother who bought a patrol boat which seems to spend it's entire life on dry dock for repairs. I'm not sure I can afford boating.

[@eekee6034]

They do say a boat is a hole in the water into which you pour money.

[@matthewmartin1970]

Fantastic video as usual. I live vicariously through your wiring struggles.

[@peterhadfield873]

When i saw the title I thought we were in for another of your famous cooking videos :-)

[@robertsaunders9997]

That was very good, keep it up can't wait for the next one .😂😊

[@holly-go-lightly]

Wow, all that electrical stuff is intimidating. It's a good thing that David is a brave sort. He will figure it all out in the end and it will be better. Thanks for the vlog, David ❤

[@CruisingTheCut]

Thank you!

[@edlandess6877]

You have to admire a person who doesn't take themself too seriously. Marvelous

[@TerryLawrence001]

Don't under estimate the entertainment value that your videos bring. Your adventure brings my mind back to my first boat. A 17ft Hourston Glascraft made in Vancouver Canada. You are making me ponder getting back on the water again.

[@davidsmith-ih2kk]

Agree totally....

[@nabarnes]

Can I suggest you do future David a favour and when you pull the wires out of the conduit, you tie a a draw wire/string on the end of the wires and pull that though - that way if you want to use the conduit for something else, pulling new cables through it with the draw wire will make it an easy job...

[@CruisingTheCut]

👍

[@Smythers00]

8:16 - Well, I can't speak for everyone here, but I enjoyed it.

[@Project_Servotopia]

The entertaining part isn't from watching the wiring per se, but rather watching you trying to wrap your head around it. And make no mistake, it is VERY entertaining. And rather informative too. At least it is for me -- y'all's mileage may vary. 🤣

[@CruisingTheCut]

😀😀

[@donjankura2411]

Never painful. Always a joy.

[@susannewberg4274]

Not boring David. It is fun watching you on a mission of discovery.

[@sheilamallett2741]

And forgetting to switch the mic back on was so funny.

[@apkelly01]

I'm a maintenance technician so I enjoy these videos. I'm wonder if the mystery connection is for a LED. It's the only thing i can think of that would fit there. Maybe they wanted some indication light to say power was present on that connection but it's a real cowboy effort!

[@djsherz]

I was going to say the same thing - looks like the LED itself got smashed off at some point, leaving just the mounting gubbins and the remains of the LED's terminals.

[@alancampbell1161]

Having spent many hours messing about with electrics on old and not so old boats, I'm fascinated to watch as you solve those mysteries that so many of us have faced. Keep up the good work.

[@d14551]

I pottered around my kitchen while watching/listening to you potter around your boat, very pleasant.

[@greentravels2850]

I love the "documenting", keep it up! It's fun being along for the ride while you find new and interesting repairs and facts about your boat. I don't think I've found a video of yours yet that I've thought "It's too boring, I'll find something else to watch."

[@bennysh]

Exciting or not, you are the star of the show and it's enough. no pressure though ;)

[@CruisingTheCut]

Oh my....

[@misterflibble6601]

Trying to figure out someone else's DIY project is always a nightmare! Especially when it comes to wiring!!! This is real life, which never goes as smooth as your typical DIY video, thanks for sharing what it's *_really_* like

[@dougwilson4537]

Sitting inside, on a cold, blustery day, waiting for spring to arrive in Canada. And then this lovely bit from Cruising the Cut, pops up on my feed. Made a tea, and sat down to continue following 'Davids Adventures on Twiggy'.😃 Your videos are gripping, in their own way, and your humour has me chuckling. Reading through the comments, I am not the only one that enjoys your presentation style, and wants to see how you make Twiggy your type of 'perfect' boat. Cheers from Canada.😊

[@CruisingTheCut]

Thank you ☺️

[@keithweybury5212]

Howdy Dave. You cut me up with your quick humour. You will fix Twiggy with you patience and talent gained over many years of boat & van fixes.

[@sharktripdan]

I think that might have been a small indicator light that indicates the batteries were on and got broken off.. I'm not sure though since it would be on all the time, there doesn't seem to be a battery disconnect switch anywhere.

[@CruisingTheCut]

Yeah the only battery disconnect is a fuse/trip switch.

[@PavelNygryn]

I'm pretty sure you are right. There probably should be 2-pin cap with LED od bulb snapped on.

[@JamesRook]

I agree that it's an indicator lamp housing.

[@emmamacbeth2300]

When I saw the title, I knew I was going to love this, and I was not disappointed.

[@richardrobinson4086]

Your wrong David...... This is great viewing, Keep it up!!👍👍

[@CruisingTheCut]

I am very surprised!!!

[@ricardonakamura-advogado]

Cheers from Brazil! I'm getting more and more fascinated by narrowboats, canals and the lifestyle in general. Your videos have been a great escape from an otherwise boring day to day life of a real estate lawyer. Thanks for sharing!

[@CruisingTheCut]

Glad you like them! 😀

[@stutubevideos]

Hardboard ... that's the name of that wood on your ceiling... the 2 sockets on your dashboard reminded me of a 12v flexy lamp connection I had on my Disco Consul years ago ... the flexy lamp had a sort of plug bit on the end... I used to use it to see my records spinning around and put the stylus on the record in the dim light of a disco, maybe used to read a map or something (just a guess) ... great video BTW, wife and I have just been wiring our Van and thought your comments rang true and were funny ... good talk at the boat show BTW we enjoyed that also ... keep up the good work

[@CruisingTheCut]

Thank you, I'm very pleased you liked the talk, that means a lot :-)

[@grahammonk8013]

Yes, that seems to me to be a very low amp version of a cigarette lighter power outlet. Today it would be a USB power outlet. EDIT: As another viewer said, it is likely the remains if a broken bulb. If so, that leads to the consideration of what it was indicating?

[@floydbertagnolli944]

Suggestions: 1. Label each wire (it’s easy to forget their purpose later). 2. Draw a simple schematic (wiring diagram). Your future self & the next owner will bless you for it.

[@japrods1]

We loved it. What a fab way to end the weekend. With you puzzling then resolving and puzzling again. It was great fun. Thank you. Hopefully you’re not too frustrated but that seems like a fine step forward. Cheers. C&Lx

[@CruisingTheCut]

Glad you enjoyed it!

[@craigmann1909]

Dont be concerned David your films are always entertaining either in van or on a boat,keep up the good work😂

[@mada9891]

Marie Kondo on a boat. Loving it

[@CruisingTheCut]

Hahaha I like that.

[@t1n4444]

David Kondo or Kondo David?

[@DrBLReid]

Another entertaining episodes as you ventura into the unknown of nauticalonics! Maybe the extra wiring is for tying up your captives after a hard day of pirating the cut!

[@caniacstevehenderson7115]

Despite no " schematics " you're doing rather well cherrio ❤❤❤❤

[@jeffmorris739]

It's like an old car from the 70's that all the previous owners added their little touches to, not really caring about what the previous owners did, leaving a mess of unused bits behind. Over the years it gets worse and worse until something happens and they give up and sell it on. Typical stuff when doing a restoration. You enjoy that David LOL!

[@jimyoung440]

A DIYer figuring out another DIYer's Mickey Moused wiring - very entertaining! I have a tip for you - if you cannot completely remove a dead, unused wire put a wire nut on it. A single wire insulated means it is unused - not accidentally disconnected! It will help in the future say two year from now when you can't remember what you did last time you work on it. It will help future owners also. There was a Triumph motor bike that kept blowing ignition modules because I kept hooking up a dead wire, I learned the hard way. Jim Y Just finished watching this, laughed my ass off because you kept reminding me of when I did the same thing. Keep up the good work.

[@Garnizzle]

This was, without a doubt, the single most gripping video I have ever watched!

[@shm5547]

14:30 conduit to the rear could be useful if you wanted to run cables to the outboard for electric start

[@CruisingTheCut]

Indeed, and I now think the truncated cables may have been exactly that (there's yet another conduit leading up to the throttle)

[@LOTPOR0402]

Yeh take the cable out and leave it there

[@Scodiddly]

Might have been charging from the motor? A previous motor?

[@shm5547]

when you pull the old cables out, might be worth tying a length of polypropylene rope to them and leave that in the conduit to make it easier to pull new cables through in the future.

[@Ice_Karma]

I quite enjoyed the voyage of discovery you took us all on. The wiring "fun" reminded me a little bit of moving into a place I rented a few decades ago that had been rewired at some point, and working out that the electrician just left seven light switches _in situ_ that were still wired at the switch but not actually connected to anything, any more.

[@Rusty_Nickle]

Doesn't matter to me. I enjoy watching I wouldn't be here if I didn't. I like the mystery of figuring stuff out too. I know it's weird but I'd watch stuff like this all day long. It's relaxing

[@CruisingTheCut]

Good to know!

[@lilbatz]

My health has been an absolute tire fire lately. I’m recovering from so nasty surgery. Watching a guy from the UK, untangle a hot mess express wiring job is just the kind of low key excitement I need right now. Don’t ever change, David 💕

[@lioncurlew]

The Random thing with the holes is probably an LED Tester, or it's a socket for an LED

[@firesurfer]

It could be a low voltage outlet for almost anything. The rest being broken off.

[@christopherlauber4944]

never boring. ❤

[@ElementofKindness]

Haha! Boy, this brings back memories of dealing with the electrics on my old road grader. Everything was so utterly messed up, that I ripped out EVERYTHING electrical, except the starter on the engine. Then properly rewired and rebuilt the entire system. (the machine is so old, original parts are no longer available, so that meant fabricating new fuse blocks and switch/instrument panels) My old backhoe wiring was in almost an equally bad state, from years of people messing with it, but I was lucky enough to still be able to order replacement wiring harnesses. Shoddy wiring drives me nuts. Hopefully it is not the bane to your existence, as it is mine. Good luck to you sir.

[@CruisingTheCut]

Thank you!

[@P61guy61]

Thank you for sharing your adventures.

[@michaelburroughs7494]

I enjoy watching projects such as this keep up the good work. Cherio

[@berniesinclair1351]

Yes like you I'm also a nerd and really enjoy watching you sorting out your electrics, so you are for, me creating some very interesting viewing...keep it up

[@CruisingTheCut]

More to come!

[@DBProductions12345-m]

Love these DIY/build style vlogs

[@CruisingTheCut]

More to come!

[@OshayrDeZwirek]

This is exciting, rebuilding is fun

[@CruisingTheCut]

I ripped out the cabin carpet today, it looks like a bomb has dropped now....

[@donclay3511]

@@CruisingTheCut Get that bomb word out of your mind ASAP. :)

[@bobuk5722]

Hi David, when you rewire I suggest you consider: Using a labelling machine to identify cables. Using crimp on ring connectors for screw terminals - not the two legged spade type. Wago connector blocks are very easy to use and with the grip terminals spring loaded maintenance free. Heat shrink tubing not insulating tape, ideally with a cordless heat gun, it's safer than an open flame. Try and run the cables in slotted rectangular conduit. And most important, check the fuse and cable ratings against loads. Better still, use miniature circuit breakers. Much easier to reset. Finally, draw up a wiring diagram as a kindness to the next owner.

[@CruisingTheCut]

Cheers. I do like Wago thingies, I have a whole box of them. And yes, there will be heat-shrinking too.

[@browmvp]

I totally agree with @bobuk5722-- Check cable and fuse ratings. There's no point using thin cables because you'll have to do the job again when those thin cables burn out (assuming of course that you haven't set the boat on fire at the same time!).

[@CruisingTheCut]

Rest assured I will use appropriately-sized cable 👍

[@andrewfyakim525]

If it had been painful to watch, I would have stopped watching it. But this one, like all your videos held my attention all the way through from the 'giddy-up'...☺.... Most of us owners of past multi-many boats have been through much of what your seeing from previous owners who were not very good electricians. One thing I know for sure, is that you will get it right come heck-or-high-water!

[@CruisingTheCut]

I hope so! Cheers

[@JT-xh4zm]

Love your dry wit. Thanks for making me laugh. Nothing boring about your videos. Carry on and keep the videos coming!

[@barbarataylor1535]

I like following your curiosity upon your boat. Please continue to entertain and educate us.

[@ASBO_LUTELY]

Excellent observation of how video works...

[@FixitFrank]

Personally I thoroughly enjoy these sort of videos. Its fascinating for me. I have done this exact work for friends and their boats and a few vans. It's a heck of a lot of fun.

[@Alex-s7y3d]

When an antique clock breaks, a clock that’s been telling time for two hundred or three hundred years, fixing it can be a real puzzle. An old clock like that was handmade by someone. It might tick away the time with a pendulum, with a spring, or with a pulley system. It might have bells that are supposed to strike the hour. Or a bird that's meant to pop out and cuckoo at you. There can be hundreds of tiny, individual pieces, each of which needs to interact with the others precisely. To make the job even trickier, you often can't tell what's been done to a clock over hundreds of years. Maybe there's damage that was never fixed, or fixed badly. Sometimes entire portions of the original clockwork are missing, but you can't know for sure because there are rarely diagrams of what the clock is supposed to look like. A clock that old doesn't come with a manual. So instead the few people left in the world that know how to do this kind of thing rely on what are often called 'witness marks' to guide their way. A witness mark can be a small dent, a hole that once held a screw. These are actual impressions and outlines and discolorations, left inside the clock, of pieces that might've once been there. They're clues to what was in the clock maker's mind when he first created the thing. I'm told fixing an old clock can be maddening. You're constantly wondering if you've just spent hours going down a path that will likely take you nowhere, and all you've got are these vague witness marks which might not even mean what you think they mean. So, at every moment along the way you have to decide if you're wasting your time or not. Anyway, I only learned about all this because years ago an antique clock restorer contacted me, John B. McLemore, and asked me to help him solve a murder. This is the beginning to my favourite podcast S Town and your video reminded me so much of it I had to share. It was so entertaining and hysterical as usual, the third bit of Velcro really set me off. From someone with zero interest in this sort of thing usually.

[@PeterfromQld]

This is why we watch your channel David. It just feels like the bloke next door is telling us his story of buying an old boat. Keep up the good work.

[@sheilamallett2741]

He really ought to be on the telly

[@loudsubwoofer8492]

we all enjoy the journey, wherever it takes us!😃👍

[@johndavies6769]

Without reading all the comments and the tens of people telling you it is called hardboard. I put my ten penny worth in. I enjoy all of your content not boring at all it’s like I’m along side with you as you tackle each problem.

[@CruisingTheCut]

Thank you

[@markalanthompson6214]

These videos are not boring. They are a lot like a friend explaining some project he or she has been working on, in some conversation you might have in their garage. It is close to an every day type of interaction I might have with someone.

[@richrode6520]

Love it, David! Keep us updated on your remodeling, I find it interesting.👍🏻

[@CruisingTheCut]

Thanks! Will do!

[@jonbrinsmead5569]

David your investigations are most interesting. I am beginning to think that fibreglass boaters are quite a different tribe from narras. but keep it up we love it

[@LarryWoods-s5t]

great video love this kind of video keep more coming as fast as your brain can calm down...great job....wish i had an old project also..bye from corning ohio

[@Kld4402]

I like the working on the boat vids every bit as much as cruising. Watching the process is very interesting. Please keep them coming!

[@hughcarson6837]

Keep going, I do enjoy watching you working.

[@leobuildsit]

In my experience with old boats. Sometimes it's best to disconnect the wires and start a fresh electrical panel using marine grade wiring. And using a marker or label maker to label what is being attached and where it's going is often the best route. In this video, I see alot of automotive wiring being used in place of shielded marine grade wires. I hope you enjoy your puzzle, I'm in the middle of a rewire myself.