I decided to give myself another project and take my 36" Hunter Comfort Breeze blades and put them on my gear driven fan. The result was pretty interesting.
Пікірлер: 51
@iamnamednobody63883 жыл бұрын
2:20 damn it’s so quite on high speed
@evanchapmanfanman4 жыл бұрын
Sounds like a 3 phase motor upon windup to full speed, these should have come from the factory like this. Putting it on the 2 and 1 settings on the controller wouldn’t change the speed much, I can tell by the sound of the motor that it’s already close to max speed, (3000 rpms), the grinding was likely just motor vibration between the gears, the gears have to be able to withstand the full torque of the motor and these blades actually reduce load on the gears.
@nickandhizfanz4 жыл бұрын
I did not think the motor could handle that many rpms, and that makes sense, the grinding just did not sound normal so I didn't want to take the risk considering the gears made of plastic. Yes these blade do reduce the weight so I knew the motor would at least handle the #3 speed.
@CeilingFanVideosOnYT4 жыл бұрын
@@nickandhizfanz Well it's only made to be on speed "1" in first place.
@duyanangtran9657 Жыл бұрын
😂
@CeilingFanVideosOnYT9 ай бұрын
@@Alexthefancollector It could be that blades and pitch are not original.
@expgretaillegacy Жыл бұрын
2:24 Dang dude! I'd think that fan was broken if I didn't know it was gear driven! Sounds like a Kitchenaid mixer!
@stephenvaliente13373 жыл бұрын
Wow! I didn’t see that coming! Who knew!
@PythonvrBigboy Жыл бұрын
this fan is so quiet I can sleep with it on. approved for installation 😀
@restroomselevatorsofflorid210210 ай бұрын
Not 🤠
@Dominicarjune2 жыл бұрын
You can actually get metal gear for the ceiling fan instead of plastic First he take the gears out of the ceiling fan and coat them in oil then you push the gears into clay to mold the shape of the gears gently pull the gears from the mold.pour molten aluminum into the mold then drill the holes in the gears and tap them
@jaedenspider877 Жыл бұрын
Holy frick that thing goes fast
@Gabehasnewyt4 жыл бұрын
Run it on speed one, it wont harm it more than running it without blades
@oheck3 жыл бұрын
that fan is a single speed
@Gabehasnewyt Жыл бұрын
@alexthefancollectorwalker1553 Shut the hell up, it won't break it you you fucking imbecile
@solinus71312 ай бұрын
Its connected to a wall control@@oheck
@TheFanlover273 жыл бұрын
2:18 wow thats hella fast.
@paynemononymousbachman2 жыл бұрын
It would be interesting to see if you could put a spinner motor in it from another fan.
@nickandhizfanz2 жыл бұрын
I like that idea 🤔
@paynemononymousbachman2 жыл бұрын
@@nickandhizfanz Dan Spiffy Neuman converted a Nutone friction drive ceiling fan to a spinner motor in this video. kzbin.info/www/bejne/l36YdGmqeb6ShZI I know they are two totally different fans but am curious if it is possible to convert one to a spinner motor. I would think getting the gear with the blades attached would be the hardest part to get to spin with a spinner motor.
@77GSB9 ай бұрын
Sounds like a Lamborghini
@ThunderClawShocktrix Жыл бұрын
its actually going to be under less load even at high speed like that with short blades, that's how it got so fast the only real danger is the grease flying off the gears which could be solved by using some thick grease on the gear teeth
@NickSpires09Күн бұрын
Great fan and video can you tell me how a geared fan works ?
@Gabehasnewyt4 жыл бұрын
Speed 1 speed 1 speed 1 speed 1!!
@JustJackhere4 жыл бұрын
No it will probably wobble too much that it will fall out of the dang ceiling!
@Gabehasnewyt4 жыл бұрын
@@JustJackhere bet, watch my Davimport Excelsior video, that fan is one of my most wobbly fans
@GeorgeIsRandom3 жыл бұрын
@@Gabehasnewyt Send Link To Video
@TheDawg_1373 жыл бұрын
Plus the plastic gears might break
@rattanasakchuamak59102 жыл бұрын
He tried to put on speed 2 and he hearing gears grinding if speed 1 the gears could broke
@jaedenspider877 Жыл бұрын
Could you try to put on Cane blades?
@nickandhizfanz Жыл бұрын
I could if I can find cane blades that fit the brackets
@jaedenspider877 Жыл бұрын
@@nickandhizfanzok
@vacuumlover14 жыл бұрын
Boiii and I thought I was a fruit cake for my vacuum thing
@iloveRUSSIAAA2 жыл бұрын
Just wait until you find the toilet and public bathroom enthusiasts.
@ACFC.1000 Жыл бұрын
Baby original blades would look cool on that
@erickmorton80854 жыл бұрын
Nice
@stormspotter4 ай бұрын
man having that would drive me crazy although nice fan where did you get that
@nickandhizfanz4 ай бұрын
I got the motor itself from ebay. It didn't come with the rest of the parts so the blades and blade arms are from my 36" Hunter Comfort Breeze which is also from ebay
@下雨天-t3f4 жыл бұрын
Noisy Ceiling Fan
@ceilingfanman96624 жыл бұрын
I wouldn't be running it that fast
@rattanasakchuamak59102 жыл бұрын
It's so loud on fast speed!
@ECFE4 ай бұрын
What's the cap value on speed 2? These top out at about 5-6 uf
@nickandhizfanz4 ай бұрын
I honestly couldn’t tell you. I had to relocate so no longer have that control around but I still have the fan. I just wasn’t willing to risk a possible failure in the motor by pushing it too hard
@ECFE4 ай бұрын
Fair. But that's probably why the gears were grinding, speed 2 was way over the fan's abilities
@tyronlemons5203 Жыл бұрын
4:05 you can kinda hear the motor better
@triresgdvidsfansandmore34102 жыл бұрын
That is really noisy
@jasimalbuainain8227 Жыл бұрын
Mine is faster than yours mine is white not lg its has 3 orange spots on 3 wings