GM never should have stopped making the 3800 v6. It was easily one of the best engines they ever built!
@BeeABaw4 жыл бұрын
You can get crate 3800 engines. They will stick round just like the other iconic GM engines
@missingremote43884 жыл бұрын
Yep, I bought a low mileage used one + Reman 4t65e transmission. Would fork over more for a remanufactured 3800 or, crate Buick V-6 $2500used $3500 Reman,$4500- $9000 Crate included fluids and installation
@syanheart31784 жыл бұрын
I got 340K out of my first 3800. Only issue I had was the intake melting itself because I was a shitty high school teen that only cared that my car looked good and never checked the fluid haha. Wheel bearings on the W bodys are what kills me :p
@paulrobert22494 жыл бұрын
The Cadillac 4.9 also
@generalzod79594 жыл бұрын
@@paulrobert2249 i drove a 1990 Cadillac sedan DeVille. It had the 4.9 and I liked it. Were they also known for reliability? Only drove a rental briefly.
@TARider24 жыл бұрын
I wanna do this kinda stuff on my 06 buick lucerne! Everyone thinks it's just an old man car, makes a perfect sleeper!
@evangoff55114 жыл бұрын
I have a 2010 im doing. Even in stock trim its fun watching jaws drop when you put the pedal down. Your at a slight advantage as the 06 has the 3800 while my 3900 doesn't have the aftermarket of the 3800.
@Evanmaier4 жыл бұрын
I have one too, the zzp gt1 cam is pretty fun with it, im also going to put in a hv3 high velocity intake insert which is supposed to make like 15 horse and extend the power band and add low end torque which ik these lack xD, but i have an extra 3800 which over the winter im gonna turbo it, gt2 cam, and of course all the valve train upgrades to support the cam, and im hoping itll hold up on low boost , im hopefully gonna push 450-500 horse by this spring in a grandma car.
@bumbershoot7723 жыл бұрын
@@Evanmaier what valve train upgrades are needed to match the cam? i’ve had my 04 bonneville for years and i’m looking to start upgrading it soon
@noahp24303 жыл бұрын
@@evangoff5511 that’s what I wanna do with my northstar in my 02 deville I did an exhaust on it and it flows really good now and you can tell it loves to just start pull super hard once you open it up
@grantflennoy59573 жыл бұрын
I'm with you i Love SLEEPER
@jjs777fzr5 жыл бұрын
Wish I lived closer to a reputable 3800 mechanic/tuner. Turbo would get the nod for my ‘04 MCSS. Thanks ZZP for supporting the 3800 base!
@Toniez02 жыл бұрын
I am 17 with 3.8 v6 impala and consider myself lucky man
@vendettathekid65983 жыл бұрын
I Got a 2001 Airbox on my 1999 pontiac grand prix with a K&N Air filter, but I plan on doing the 1.0 pcm, catted down pipe, HV3, rockers, before I do turbo & valvetrain. Thanks ZZP for making owning a 3800 feel like I own a race car😂
@RanoAventuras4 ай бұрын
Yo im trying to learn how to mod mine, think you can give me some tips and advice?
@bliskthehusky22052 жыл бұрын
i wish more of your mods worked for the fbody 3800 because some of us v6 boys like to get sideways!
@djlackey9273 Жыл бұрын
Bro same im in a 98 firebird
@jayeebennett64223 жыл бұрын
I just so happen to have a pontiac with the 3800 series III and this will come in handy.
@shankskankzuko29362 жыл бұрын
What color lol
@ivanvrkljan10565 жыл бұрын
Great vid, I own a ‘02 Monte Carlo ss and now I know what my options are from you guys thanks
@MetalMasterdom4 жыл бұрын
The SS has very high shift points programmed from the factory. PCM should probably be lower on your list then. I just bought the same car. First on my list is the tubular front exhaust manifold. Then port/polish lower intake > cam > pcm > downpipe w/o cat > EGR delete. BTW...if you haven't been there...the governor kicks in at 125 MPH(in overdrive or 115 MPH in 3rd w/ stock pcm). 😊
@zanderdecker4 жыл бұрын
i own the same car myself. so far ive done essentially fbo, exhaust, suspension, and injectors with the pcm from them and its definitely quicker than stock. i have the new hv3 on the way with new plugs and wires. right now, im keeping up and beating newer 3.5 chargers as it sits so im pretty happy with it
@xxrated-21743 жыл бұрын
same but a 04
@143poppa3 жыл бұрын
I’m watching this videos and adding to the cart
@ArlowFarrell Жыл бұрын
You guys stopped selling most of the performance mods for the 3800.
@stevejenkins99843 жыл бұрын
Can u imagine a 3800 v6 with modern tech? Itd be a 380hp stock monster! And out last the crappy 3.6l!
@blackericdenice3 жыл бұрын
I never seen anyone have a problem with a 3.6. I think you guys spend too much time on forums.
@Slowc300133 жыл бұрын
@@blackericdenice i have seen so many timing chains go to hell on them.
@blackericdenice3 жыл бұрын
@@Slowc30013 No you read about them on a forum and now you are repeating what you read. How do I know this? I checked your channel. You are a child who want some attention.
@brennan_mclachlan3 жыл бұрын
@@blackericdenice such an emotional response for no reason. If he just a child why is he under your skin so much? ;)
@blackericdenice3 жыл бұрын
@@brennan_mclachlan He is not under my skin.
@TheWillD775 ай бұрын
I just bought a 2004 GP GT. Its like new. 66k miles. I have always loved Pontiac. This thing is amazing. Hoping to put some of these mods in place soon.
@codeviper22239 ай бұрын
I want to do a lot of this this to my 05 Pontiac Bonneville, would make a great sleeper, nobody would expect anything!
@bobthbldr38 ай бұрын
Umm... 05 was the last year they made Bonnevilles. I had an SLE.
@codeviper22238 ай бұрын
@@bobthbldr3 Meant 05 my bad.
@im_karter87123 жыл бұрын
I have 2 grand prixs and I’m in love with these cars I just wish the transmission hadn’t gone out on my other one
@mikeyyg20004 жыл бұрын
I can't wait to start on my 2006 Grand Prix. I was looking for the super charged model but I couldn't find one in good condition anywhere around me in Port Huron Michigan, so when I found a spotless base model with only 1 previous owner I latched onto it. I'm ordering the PCM my next check. I can't wait to be able to pull up on a stock gt or gxp and give them a run for their money. They always pull up on me knowing damn well my base model is slower lol😂 can't wait to change that.
@stevepaganis53624 жыл бұрын
Hell ya 08’ base right here😂
@lil.91274 жыл бұрын
Yessir 05’ base
@mikeyyg20004 жыл бұрын
Team base model👌💯
@dennisedmonds814 жыл бұрын
Still will get smoked trying to battle a gxp
@dennisedmonds814 жыл бұрын
Don’t forget the gxp is a ls v8 engine and will still fuck you up without a supercharger and supported mods
@cameronalford4506 Жыл бұрын
Can y’all do a N/A 3800 build just like how y’all did the Cruze?
@1k_vonte7 ай бұрын
Would be nice
@uncreative_name484 жыл бұрын
Wish there was this much aftermarket support for the 3400
@samsquantch144 жыл бұрын
wottech makes some stuff
@cody41282 жыл бұрын
Milzy motorsports does as well
@dcarden30312 ай бұрын
There is just a different website and company
@bensond325 жыл бұрын
I'm thinking this coming spring when I get my yellow '02 MC SS out of winter storage, I'm going to get the downpipe from you guys! It'll be one of my first real mods per-say as I only have a CAI, a muffler delete, and a couple other small things currently.
@FatalCorleone073 жыл бұрын
How does a muffler delete sound??
@skyreach6693 жыл бұрын
Do it bro
@eddieescobar47225 жыл бұрын
I have a lot of these mods on my n/ a impala 04. And its a animal. 👍 good info
@thechosenone35045 жыл бұрын
Eddie Escobar got all these mods and than some. I'm capped out at N/A. time for turbo and better paying job
@chadmitchell41715 жыл бұрын
I have an 04 aswell i really wanna start modding it
@chaoslord89183 жыл бұрын
If you've got an F-body 3800 (Camaro or Firebird), especially an older one with the worse air box, check out the Spectre SPE-8161 air filter. Buy just the filter, remove the entire stock air box, and mount the filter right onto the intake manifold. But first, drill a hole in the center of the filter for the air temp sensor, and you'll be good to go.
@llmexicanlm7885 Жыл бұрын
Would this go well with an oldsmobile cutlass ciera sl? (97')
@chaoslord8918 Жыл бұрын
@@llmexicanlm7885 Hard to say. My solution above is for a rear-wheel drive car (actually the only RWD use of the 3800), and you're talking about a front-wheel drive car, so the position and flow of the air box is completely different. The size might be different too, and there might not be enough room to fit the filter there. I haven't messed with any FWD 3800s so I can't really say either way. Good news: pretty much all 3800 aftermarket intake/air boxes/filters are for FWD cars, but there's almost nothing for us RWD F-body guys.
@henrywashington373210 ай бұрын
I have a 97 bird with 3.8. I notice it's different from the 98-2002 air box. Would I feel a difference with the air box you speak of
@Rome78694 жыл бұрын
🤗🤗🤗 I like this guy.... I wish it's lil bro the 3300 had room to build on for more horses... lil phukers have lots of torque tho...
@1991tommygun3 жыл бұрын
Loved my 3800 Bonneville, the Rust got to her before the engine gave up
@fuzze74123 жыл бұрын
Got a 2001 camaro with the 3800 87k miles
@donbon42042 жыл бұрын
after 30 odd years of the 3 coil pack v6's surely someone has created race style cams and heads for these engines that make serious power and not relying on a stupid chip
@dr_d1llp1ckl393 жыл бұрын
Been looking at your website lately probably going to start buying parts soon
@ZZPerformanceChannel3 жыл бұрын
Sounds great! If you have any questions feel free to reach out to us.
@loganweisman17174 жыл бұрын
Can you do a top 5 on RWD 3800? No one cares about them and it makes me sad
@codydowil5063 жыл бұрын
I've got one in a 97 Camaro 5 speed. Mods so far are LT1 radiator swap, 3inch aluminum driveshaft swap from SS LS1 car(dropped around 10 pounds from the 2 piece steel unit), factory z28 dual exhaust with flowmaster 80 series welded in, K&N cone filter, z28 rear sway bar. Also have mid length headers/y pipe, high flow 3 inch cat and stainless GMMG Madhammer cat back for v8 cars waiting to be put on. Definitely do the driveshaft swap, and do anything else to keep engine/coolant/underhood temps down. Other stuff is more replacing lower intake gasket w/ zzp aluminum one, get a metal front cover gasket, relocate coil packs to the firewall, etc.
@donbon42042 жыл бұрын
yeah with the t5 gearbox instead of those electronic shit
@jorguerodarte505411 ай бұрын
I really hate not making enough money to give love to my Grand Prix, there are many things that I would like to be able to make some modifications to
@deitrichgaddis52474 жыл бұрын
Never heard of it but interesting hv3 need an install and performance review
@RobVandal3 жыл бұрын
Did you ever buy it?
@mockbattles3 жыл бұрын
I’d like these for my RWD Holden Ute.
@kobecopter3573 жыл бұрын
y’all should restock the super chargers soon haha
@BringBackMasculinity1987 Жыл бұрын
I like 1 & 2. Just because its my daily driver...
@ISuckAtCOD14 жыл бұрын
I own a 07 Buick lacrosse with the 3.8L series think I might have to make a sleeper.
@johnmartin5603 жыл бұрын
i just bought a grandma fresh one with 36k miles, & want to do a little work to it as well. I'd like to do the 1.0 PC, but it doesn't look like they support our cars unfortunately. The stock shift programing is terrible; mine shifts into 4th at around 37 MPH unless I have my foot in it.
@ISuckAtCOD13 жыл бұрын
@@johnmartin560 hell yeah man!
@davelowets9 ай бұрын
Then pull your shifter into 3rd if you don't like it, then shift it when you want it to
@michaelbenoit2485 ай бұрын
The problem with the K&N oil soaked filter is that it’ll plug the MAF sensor.
@brendanwalsh52134 жыл бұрын
I'm gonna do these mods to my 02 regal
@skyreach6693 жыл бұрын
Naturally aspirated? Let me know how it turns out, as I'm trying to do the same
@phillipthethird422 жыл бұрын
I need to know more about my 3800 supercharged.
@DYLANTRIES4 жыл бұрын
I dont understand why zzp focuses on front wheel drives primarily? I have a 1997 camaro 5 speed and have been looking for inexpensive mods to help it pull a little but more when I have fun, but wanting it to be super reliable like the stock 3800 is, I did blow and engine due to the previous owner failing to assemble to the engine but I got another engine and it already has the SLP 1.8 ratio rockers and would like to take control of timing and fuel more but wanting to put a car back on it to help with the fuel economy or without one if I had or knew a way to help it run a bit better
@Coronet_shop4 жыл бұрын
Interesting well I better get a 3.8 from a MC, GP, Olds for my sunbird
@WaltuhBottlecapАй бұрын
Giving me ideas for my 05 impala 9c1
@mathieumarineau4585Күн бұрын
DO ZZPAV A N/A BUILT PROJECT very curius how mutch power you can get
@rogerfuller78763 жыл бұрын
I have a 00 Pontiac Grand Prix 3800 n/a I use for a bush car. I’m looking for stuff that will make it run the best it can. I notice I have a slight miss in it but is better with more throttle. Exhaust is cut off directly after the converter
@brewtonmaint21525 жыл бұрын
When are you guys going to come out with drive by wire ecm files?
@Toniez0 Жыл бұрын
2:53 yeah right when you guys plan on restocking??
@mikie48243 жыл бұрын
I have a 2000 , 3800 with transmission for sale runs great...
@jaymoney1199664 жыл бұрын
Just got an 07 lacrosse with a 3800 and I think I’m going for a pcm swap and rockets
@missingremote43884 жыл бұрын
Nice choice. I have a lacrosse too! The stock engine is strong. Will always do a burn-out! Mine is in the shop getting some ZZP modifications right now. I already have the ZZP exhaust since 2016. I'm adding a ZZP polyurethane, heavy-Duty Lower engine mount. ZZP chrome exhaust headers (front & back) and New ZZP ingnition coils to go along with the replacement "rebuilt" auto transmission. ( And a newer engine too) The bill...➡️$6700.00 parts and labor🏁🏁🏁🏁⭐
@samsquantch143 жыл бұрын
@@missingremote4388 $6700? damn you got shafted
@missingremote43883 жыл бұрын
@@samsquantch14 constant repairs are expensive ( I do what I can myself) Luv the old buick, has 206.000 miles on it. Will change the downpipe exhaust tomorrow. ZZP w/cat downpipe = $300 + labor
@GalaxyStranger013 жыл бұрын
This is the first I've seen of this - I know some people are turboing them and dragging them, but I've never been able to find performance engine upgrades. Can anyone put up a few links to sites that carry drivetrain upgrad parts?
@Trapper42658 ай бұрын
I purchased my '08 GP 3800 base new. Oil changed every 3500k, tranny flushed every 50k. 230k, miles both run strong. I want more throttle response. I feel I have to step into the gas peddle to go. What's the least expensive mode you suggest, and where do I purchase it?
@marc-andrecourtemanchetrep77765 жыл бұрын
Hi ZZP team, Nice video! I have a question, Do you have a turbo kits for a grand-prix gxp? It would be insane with the ls4 engine!
@skyreach6693 жыл бұрын
Google the actual engine by it's engine code, then looks up mods for it specifically. That engine was in others cars too.
@Tenasedeinc Жыл бұрын
Prices man!!!
@Butterx224 жыл бұрын
So I can buy an SLE and turbo it? Say less.
@zcyphe11 ай бұрын
You should start making stuff for the L27, I cannot find anything for it online
@davelowets9 ай бұрын
L27?
@mikeneff8322 жыл бұрын
Do you have options available for a 1996 Buick park avenue? I want to turbo it but maybe just cold air intake for now. Someone stole my converter so I’m running catless was think to straight pipe it since I fixed to missing cat issue. Maybe some sort of plug in tuner ?
@BoltofTalons3 жыл бұрын
I wonder what mods would be available for a 1988 Buick 3800 V6? I've been looking to add a "few" things to turn it into a fuel efficient sleeper, and to give it muscle car/lowrider vibes
@matthewcunat35653 жыл бұрын
What did you end up doing? I have the same car and looking to do the same thing
@Underliner072 жыл бұрын
Do you have the park avenue ?
@Andrew-bv6qc2 жыл бұрын
You say do one or the other for rockers and can but why wouldn’t you do both? I’m curious I’ve always seen both done at the same time on other motors
@davelowets9 ай бұрын
The cams are meant to work with the stock rocker ratio. The high ratio rockers are too much lift for the cams that are meant for a stock ratio rocker
@notsogrand28373 жыл бұрын
Yeah but like, what about the transmission. Is the 4t60e gonna handle all that?
@davelowets9 ай бұрын
Yes
@durzolife2 жыл бұрын
I know this is a older video but just wondering in a car not meant for drag racing but roadcourse and windy twisty country roads would staying N/A make sense ? With say the tune, hv3, GT2 cam, headers ?
@elirenigar93572 ай бұрын
I r e a l l y wish I could get a good tune on a gen 1 engine. Specifically a lesabre. Pre-96
@slownoma10764 жыл бұрын
I have a ‘98 Buick lesabre with 3800 series 2. Anyone modded a similar car/engine? How did it turn out?
@kameranspahn95543 жыл бұрын
Can you do all of these mods with a rwd 3800 camaro?! I have a 2002 camaro I’d like to mod
@dyrdek3 жыл бұрын
ALL of these mods i would currently like to slap on my 3800 firebird bad part is alot of the parts are very hard to come by
@udmbfckx2916 Жыл бұрын
Do these improvements apply as well to the gen 3? I would love to purchase a 2004 - 2008 GP with this engine since it solves the more common issues in the gen 2.
@_ItzBrodie_6 ай бұрын
Tryna figure out the same thing
@toddbuettner39563 жыл бұрын
I have a 2003 ss Monte Carlo..3800.would love to upgrade the computer for now. Any ideas on injectors and fuel pump?
@dafiapoko6383 жыл бұрын
Can your camms be used on a camaro 3800?
@prestonboling14272 жыл бұрын
really interested in those hv3 inserts.. last time i had checked i think they were out of stock and real pricey but i wonder how well it would pair with a turbo 3800
@4g63tpowered Жыл бұрын
Can you educate me on what the fuck they are exactly? I'm new to the 3800 club but a veteran in car modding. They look like intake manifold spacers. I got the intake and just did the coil wires and plugs from zzp looking at the PCM and down pipe next but wondering wtf this is exactly
@HypebeastMajorities10 ай бұрын
@@4g63tpowered They are basically a replacement for the stock intake runners that are inside the upper intake plenum. You get higher power from this because it drastically changes the air velocity and how it enters your engine, the stock runners are about 4 to 5 inches tall, the HV3 insert reduces that by about 3 inches. The taller the runners you get more low end power/torque like the stock runners. the HV3 is much shorter and has a smoother airflow so it pulls the top end of the power band up. They are out of stock from ZZP but there is a brand called khaos motorsports that sells what the call an HV4 insert. I have the HV4 by them paired with the GT2 rpm cam from zzp.
@4g63tpowered10 ай бұрын
@@HypebeastMajorities thanks Buddy!!
@KonfliKT23 Жыл бұрын
Will any of these work on series 1 engine
@MrFenceBuilder11 ай бұрын
Didn't know rockers alone could make my 200k+ mile 3.8 a little more happy, shes got fantastic oil pressure of 45 at idle and just over 60 everywhere else, ide love to do more but the oil changes have been leaving a bit of copper tone shine particles in the catch pan 😢
@henrywashington421211 ай бұрын
Hey did you feel an obvious change in power with the rockers? I'm not sure what to do just yet.
@MrFenceBuilder11 ай бұрын
@@henrywashington4212 lol i didnt install anything on my car, just gathered the info from the video
@davelowets9 ай бұрын
The rockers have a higher ratio, and lift the valves further open. It's basically like putting a higher lift cam in. Achieves the same result 2 different ways
@whatluck15083 жыл бұрын
Which is more fuel efficient, supercharger or turbo? Like which one makes more hp with better fuel efficiency
@ZZPerformanceChannel3 жыл бұрын
Turbo for sure! Roots style blowers are parasitic by nature meaning they require HP to be driven.
@Ricky-manic4 жыл бұрын
Question ZZP ever thinking making a supercharger kit for the GM 3.9L that came in the Pontiac G6 idk what other car but that would be cool to do 3.9 makes like 260hp
@gavinthroop28393 жыл бұрын
Believe the 06-14 impalas had this motor too
@davelowets9 ай бұрын
What about a supercharger kit for an L26 car? Is there something available?
@charlesgraham99548 ай бұрын
i put a 3800 in my 65 VW square back.
@kontrolfreeak56784 ай бұрын
What HP do you recommend considering swapping/building a 4T65E trans for a built one? I’m around 300hp and 110k miles.
@harvesterofthemad94265 жыл бұрын
Will these upgrades work for Buick and Chevy 3800s? Such as impala, Monte Carlo, regal, and etc?
@jjs777fzr5 жыл бұрын
Their web site parts description looks to show what cars they will work on.
@Evanmaier4 жыл бұрын
yes they should because they are all made by gm, the only difference (which will say on the website) it probably the exhaust and that typpa stuff, but everything should work you would think.
@davelowets9 ай бұрын
It's the same engine in them all
@stephendavidbailey27433 жыл бұрын
Interesting but disappointing: My 3800 powered 1995 Oldsmobile 98 apparently has no option to increase power. I guess some 3800 Series II are more equal than others.
@budphillips93013 жыл бұрын
Nah ZZP isn't going to touch that obd1 car.
@greenbassboosts88722 жыл бұрын
@@budphillips9301 obd1.5 mess actually
@Llggd Жыл бұрын
Holy Sh*t! This guy tried to roast me on Facebook saying a modded supercharged 3800 cannot make 300whp. He loves turbos but underestimates the power of E85 and pulley dropping along with supporting mods.
@Llggd Жыл бұрын
He was disrespectful to the Buick V6 SC community. Even ZZP has videos of these cars making over 400whp.
@jordanhall11333 күн бұрын
Buddy has one he dailies at 600whp in a park avenue
@pedromaguellal66624 жыл бұрын
Will these products work for the pre-series 1 or any recommendations for a 1989 buick 3800 fwd
@nonofyabusiness47804 жыл бұрын
get rid of the motorola ICM and go with the later Delco set up. reattaowner.com/roj/common-problems-a-solutions/replacing-magnavox-ignition-with-delco. Also you can install GEN III bosch injectors. larger exhuast piping , cold air kit. you can put a L67 supercharger or turbo charger but with the high compression of LN3 engine doesn't hold up.
@ericnielsen54412 жыл бұрын
Hey, I have a 1999 grand prix n/a..can my local mechanic install the 1.0 pcm and have it working correctly or does he need to be really familiar. I apologize if this is a dumb question..I'm kind of a noob.
@ZZPerformanceChannel2 жыл бұрын
The install is a fairly simple process. If you're not up to it, a mechanic should be able to easily install it. We also include directions with your order.
@ericnielsen54412 жыл бұрын
@@ZZPerformanceChannel I guess it's the tune I'm talking about..thanks for getting back so quickly btw
@thatlowobs36994 жыл бұрын
Anyone have before and after 1/4 mile or 1/8th mile times for the 1.0 pcm programming?
@RobVandal3 жыл бұрын
So, I have a 2006 Base model Grand Prix. I want to do some light modding to it, like you've mentioned in this video. I'm extremely new to the car scene and want to get my feet wet. Where can i get parts for it? What can i do to it? I seem to only be able to find parts for the V8 engine or the GXP model. Is there a forum for these cars? Thanks for the help.
@ZZPerformanceChannel3 жыл бұрын
Lucky for you, you can find all sort of parts for your Grand Prix if you go to our website, zzperformance.com. If you need some guidance or suggestions, reach out to us at customerservice@zzperformance.com.
@mylezzpurhourr4 жыл бұрын
Wonder if these will work well on the Series III V6, got a 2006 Base GP was looking to do some modding to it
@wynterfrench27012 жыл бұрын
That's what I've been looking into as well
@h33ls_up8 ай бұрын
Supercharged kit hasn’t been available for a few years now. Really disappointed
@miriciousvespyre4 жыл бұрын
Now what about a 89 Series 1?
@severesilence18715 жыл бұрын
What about the u bend delete ?
@ninjaryohazuka5 жыл бұрын
The u-bend in the stock downpipe is said to be one of the most restrictive areas on a 3800. A u-bend delete (or even a whole downpipe) will eliminate the restriction at that part of the exhaust, allowing it to run more freely and smoothly.
@lawrencemeyers12125 жыл бұрын
In less that 04 it still has cables
@Mr.Safety.4 жыл бұрын
Liked and subbed btw
@dukeboreham27823 жыл бұрын
Hey man, HV3 is no longer available. What's going on with that ?
@unknownsoldier41562 жыл бұрын
I believe they are redesigning it. Who knows when it'll be back.
@djlackey9273 Жыл бұрын
Ok but what would you do to let's say a 98 firebird with the same motor
@louiswright9102 күн бұрын
Will these pcm update reduce how hard these 4t65e trans shift into 2nd?
@XxMalabooo2 жыл бұрын
Hello, do you have a guide on how a tune would work? I am a novice and really wanted to rejuvenate my 2008 pontiac grand prix - its the v6 model. Does the tune in this video work on my model? Anything I need to install?
@ZZPerformanceChannel2 жыл бұрын
We do provide tuning support for the 2008 V6. Here is a link to our tuning page, If you have any questions email us at customerservice@zperformance.com. zzperformance.com/collections/3800-electronics/products/zzp-1-0-pcm?variant=31348156923966
@shankskankzuko29362 жыл бұрын
I have a 2004 grand prix with the 3800 v6, I love cars but I'm ignorant when it comes to mechanics, recently I came into a C6 Corvette exhaust is there any way I could swap it for my stock exhausts on my GP? Anything helps
@davelowets9 ай бұрын
Lol, no
@RobertJeffersonBased2 жыл бұрын
You do not sell the HV3 any more?
@rb.67014 жыл бұрын
Anything I can do on a Series I 3800? I believe the transmission does not have electrically controlled shift so not sure any options for that.
@LiuMoon134 жыл бұрын
What about twin charged?
@jeffpalmer21923 жыл бұрын
How much boost can a stock 3800 hold?
@knownbarkert61538 ай бұрын
Probably don't care after 2 years but 10psi is safe. Anything after that and you're getting dodgy
@jeffpalmer21928 ай бұрын
@@knownbarkert6153 actually thank you I've been running 5psi on stock
@jaybeans21983 жыл бұрын
Chuds didn't put thread for 02sensor on my downpipe with the cat. H body SMH. Wrote a review on this and they deleted it!
@lawrencemeyers12125 жыл бұрын
I ask zzp about my 08 grandprix they told I couldnt add supercharger kit because drive by wire throttle body is this true I can't do nothing to it bee side air box for it
@ZZPerformanceChannel5 жыл бұрын
You can add a supercharger to your car, we just do not sell one for the Series III engine. We do offer a few other parts that will fit your series III, exhaust and internals mostly!
@jimmore41553 жыл бұрын
Do they make a air induction that will fit a 96 firebird with 3.8.Also is a turbo kit available?
@speed1st2 жыл бұрын
Have you found anything out? Just picked up a 2000 firebird!
@fouly173 жыл бұрын
Can I do theses mods on my Monte Carlo ss 2001 pace car ?
@MarzooqPrimal4162 жыл бұрын
How hard would it be?to swap my series 3 NA engine for a series 3 Supercharged engine?or am i better off putting together a custom turbo kit?
@kevinhumphrey9323 жыл бұрын
Are you able to do the dod delete on the 05 grandprix GXP with the 5.3 im installing new cam and lifters doing away with the dod valve train
@dami67457 ай бұрын
Could you run the 1.65 zzp rockers with a cam even if it’s the same ratio
@ZZPerformanceChannel7 ай бұрын
We would only recommend our 1.65 rockers with our VS or GT1 cam. Make sure to measure your push rod length.
@jim5alive2 жыл бұрын
you ever have someone hook this up to an f40 transmission and put it in a fiero?