3D Design: How To Design Honeycomb Patterns In Fusion 360

This video will teach you how to design honeycomb patterns in the sketch panel in Autodesk Fusion 360. Download the Fusion 360 design file of this model from Printables.com at www.printables.com/model/1729...
Donate Via Paypal: bit.ly/TMWBDonate
🔴 Join My Locals Community: themakersworkbench.locals.com/
🔴*** Get 15% OFF YOUR ENTIRE ORDER at Starbond.com by using the link below and entering code TMWB15 at checkout. bit.ly/StarbondTMWB15
🔴 ** Chapters**
0:00 - Intro
0:42 - Channel Sponsor
1:05 - Tutorial Begins
2:03 - Inscribed Polygon
3:25 - Rectangular Pattern
6:26 - Save Sketch As DXG
6:41 - Save For 3D Printing
7:01 - Call To Action
7:16 - Dope Outtro
Creating content like this is how I earn a portion of my income, and I could never make that happen if it weren't for my viewers, so please consider supporting me by joining the channel today, or by donating at one of the links below.
🔴 ** SUPPORT THIS CHANNEL **
✅ Locals: themakersworkbench.locals.com/
✅ Instagram: / themakersworkbench
✅ PayPal.me: www.paypal.me/themakersworkbench
✅ Donate Via Patreon: / themakersworkbench
✅ TMWB's Website: www.themakersworkbench.com
✅ Gab: gab.com/TheMakersWorkbench
🔴 ** RECOMMENDED PRODUCTS **
*The Tools I use: (Amazon Affiliate Links)*
Soldering Tools:
Edsyn Loner 951SXe Soldering Station: amzn.to/3w94rSg
Edsyn FUMINATOR Bench Top Fume Extractor: amzn.to/3QjYY1I
Edsyn DS017 Deluxe Soldapullt Desoldering Tool: amzn.to/3QhaZ8e
Edsyn Loner ATMOSCOPE SMT Hot Air Station: amzn.to/49Ny1KJ
Edsyn ZD500DX Self Contained Desoldering Station: amzn.to/4d6BNSB
Edsyn Loner 2020 Digital High-Performance Soldering Station: amzn.to/4aQAdT7
Edsyn Easy Probe Tweezers: amzn.to/3W9RXo4
Kester Solder: amzn.to/3JAI9w0
Kester 951 No-Clean Flux Pen: amzn.to/3Wx7S03
ChipQuick Solder Flux Gel for Reflow Work: amzn.to/3UwzlgL
ChipQuick Low-Temp Solder for rework: amzn.to/3xJhIRR
KNIPEX Tools Flush Cutters: amzn.to/3WesuK9
Electronics Tools:
Saleae 8-Channel Logic Analyzer: amzn.to/4bd2JOL
Saleae 16-Channel Logic Analyzer: amzn.to/3UgoCpd
AstroAI Multimeter - amzn.to/3WfsppA
Siglent Technologies Oscilloscope, 100 MHz: amzn.to/49R9ULk
Wera Electrician's 1000V Insulated Screwdriver Set: amzn.to/3nZ2bUg
Mini Pliers Set: amzn.to/2KGlWSm
Klein Tools 11061 Wire Stripper: amzn.to/3o2lYlE
Heat Shrink Tubing Assortment: amzn.to/3hvidmv
Dupont Crimp Kit with Tool: amzn.to/34VBKYc
🔴 ** Electronic Components **
Node MCU: amzn.to/49RDT5J
Wemos D1 Mini: amzn.to/3UI3vOp
Arduino Nano: amzn.to/3JvaOT7
STM32 "Blue Pill": amzn.to/3WbcGHZ
Raspberry Pi 4: amzn.to/49XuKZs
Raspberry Pi 5: amzn.to/49XUDYZ
ESP32: amzn.to/49TAeUY
ESPCam: amzn.to/3xO6TOp
BBC Microbit: amzn.to/3WbXQ44
Resistor Kit: amzn.to/3Wet4Yl
Capacitor Kit: amzn.to/3UcOJ0j
Electronics Component Starter Kit: amzn.to/4baJTHI
🔴 ** Disclosures **
Note: The Makers Workbench utilizes Amazon Affiliate links, and affiliate links from other companies to help support our channel, and the projects we make. When you click on these links and make a purchase, The Makers Workbench receives a small monetary commission from the company retailing the product. : Amazon.com, Starbond.com, Banggood,etc.
🔴 ** ABOUT CHARLES **
Since 2007 Charles has dedicated his life to being a Maker and creating maker content. From writing over 3000-articles at TweakTown.com as the site's Maker Content Editor at Large to spending 8-years as a content creation specialist at Element14, Charles has a vast skill set and is learning new skills every day.
Making is Charles' life's greatest passion, and it's now how he supports himself and his family full time, so please consider becoming a member of this channel, purchasing projects, art, or merch from our website, or by donating at one of the links above.
🔴 ** ABOUT THIS CHANNEL **
The Makers Workbench is a DIY / Maker channel and website focused on the DIY Electronics and Maker movements. We feature DIY projects, 3D Printing, CNC routing, hardware and tool reviews, woodworking, woodturning, and DIY electronics tutorials, and sometimes we even live stream project builds right here on KZbin.

[@MatthewBowe]

Rather than delete the center line used to locate the hexagon, I recommend changing its 'line type' to construction. It allows faces to remain selectable as expected while also maintaining reference geometry.

[@MoeReefs]

OMG your a genius. All the other tutorials on honeycomb are ridiculous. Your method skips like 10 steps ahead. Thank you!!

[@Themakersworkbench]

Happy to help!

[@DavidPutzolu]

Great approach that makes use of rectangular pattern + directions in sketches. This is the best way to make honeycombs I've seen - much better than the other videos, plus short and to the point without having unnecessary filler time.

[@johnfellers5691]

This is such a perfectly made video to understand how to do this. Thank you for creating it for "all of us"!

[@wesselsi3791]

i have been using fusion360 for 6 months now and i did not know you could select a direction with the rectangular pattern tool, and that you can pull it 2 ways. Thank you in advance for saving my time in the future!

[@JFK3-1]

Nice use of patterns. I would probably extrude the interior webbing first. Then do a second sketch and hit P to Project the two circles onto the new sketch and then finish and extrude the outer circle. No individual deleting.

[@brianh4676]

perfect. Right to the point without being boring or confusing. Keep up the good work.

[@Themakersworkbench]

Thank you!

[@EarlyBirdArms]

Best method I have seen yet. Thank you for this tutorial 🙏

[@pcdc1337]

Thank you for this perfect straightforward tutorial.

[@volkhen0]

I've seen few videos how to do it and this one is the best.

[@bradnelson3595]

Thank you for a clear tutorial. I hope you do more like that.

[@VisualReversal]

Thank you! This was very helpful and very easy to follow.

[@stavart13]

Very helpful and in particular you solved my spacing issue, your method is the quickest and easiest, THANK YOU

[@relapsetackle]

Great video! I've been wanting to get into 3D printing and designing lure molds. I will be watching a lot more of your tutorials.

[@patrickcarpenter1102]

Thanks for a very helpful video. It makes creating a honeycomb pattern easy to follow for this or other applications.

[@kt323]

Awesome video mate, thank you for the great tutorial!

[@vanhelzer22]

I appreciate your efforts. thank you!

[@user-zv3gi1yc3j]

Great job. I found this very helpful.

[@n3x0ntm98]

I learn so much in 8 min. Thank you, Mr :D

[@ThatGuy-ou4ev]

This is the best method I've seen thus far. The other methods are a lot more involved.

[@FictionFactoryOfficial]

thanks for the tutorial, it was very helpful

[@jcoaudio]

Wow, thanks so much. I was doing this in a much jankier way! Much appreciated! -JC

[@j.g545]

easier and faster if you extrude the middle polygon then use the pattern on the extrude feature

[@sfrskz]

finally i learned it. thank you

[@fullydimension]

thank you, this is really useful!

[@ottovp]

you saved my pc from flying out of the window.

[@FarmGarageSolutions]

Thank you!

[@jack53104]

You can select honeycombs and delete them from sketch after finishing the pattern :)

[@pawanpandit4724]

Very helpful

[@MakerDan55]

Super helpful. Thanks.

[@Themakersworkbench]

Glad it was helpful!

[@FreedomFactory3D]

Good video, strait to the point, thank you it helped me allot.

[@Themakersworkbench]

Glad the video was able to help you! Thank you for watching!

[@TreDBacon]

Thank you for your tutorial, short and concise! I preferred as suggested by another user to not delete the centerl line of the hexagon instead i turned it into a construction line. In addition I created 2 functions (hexagon thickness and distance between hexagons) in order to make the pattern parametric, now it's a pleasure to make hexagonal patterns and edit them in a few clicks.

[@Themakersworkbench]

You're welcome!

[@aligatoryisus9865]

Thank you so much ,It was really useful

[@Themakersworkbench]

Glad to hear that

[@BlenderRender1]

Thanks, I am making thumbsticks for my FPV drone controller, and I needed some grip for the thumbsticks.

[@m.s.idrischannel5655]

thanks, much2 easier method

[@leonardoinhoqui]

How do I make an exact measurement of 0.44 between them?

[@JuniorSousaBr]

TOPPPPP

[@user-nh5tm3gq3e]

👍👍👍💚

[@diethylmalonate]

My trim function doesn't detect the intersection between the honeycomb and the boundary lines, and the extrude tool can only select the entire inner area, what am I doing wrong?

[@luismiranda6906]

The free edition does not have the polygon options?

[@Themakersworkbench]

You're comment is incorrect. Using the free version of Fusion360, In the sketch workspace, if you click the create dropdown, you will see the polygon option, and if you click the arrow beside it, you will see the polygon options. Here's a screenshot showing that the polygons are there as of 4/21/2024 using Fusion version 2.0.18961. imgur.com/a/C3OVpYj

[@jackmcgrath9570]

I would've used geometric pattern

[@maxseveroff4568]

[@DracLtr]

This is bad workflow. Pattern is made primarily in the volume modeling environment (Solid tab), not in sketch. In addition, it is faster and more convenient.

[@Themakersworkbench]

There are many ways to accomplish the same task. This is one and works well for those of us who design our models in the sketch space first.

[@jeremy6384]

a very delayed start.

[@beepboop8184]

Designin not in metric? Are you kidding?

[@Themakersworkbench]

I'm American, and 93% of my audience is American. I will include metric measurements in the next video.

[@fetthunderdome]

"6 sides polygon" for American people. For the rest of the world it's an exagon.

[@AM-jw1lo]

Thanks, but why do you have background noise when you are filming? most annoying.

[@keptleroymg6877]

bad method manual