3D One Review | FocusOnDetailing

[@jjd975975]

Used this stuff today for the first time and I really like it. Not only does it do a good job but it's very easy to work with and no dust.

[@SittingWithDogs]

I completely switched our shop over to 3D one & slowly but surely all of our chemicals will be 3D also. Great stuff!

[@dhaladetailing1225]

Great review Tim! I have been using 3D One for about 12months on all sorts of paints and is the best and most versatile stuff out there! For heavy cutting I use the Rupes blue wool pad but also use shinemate yellow, blue and red pads with awesome results👍👍👍👍

[@focusondetailing3855]

Thanks mate! Must say it's a favourite of mine now for that very reason and I actually do need to buy some more as I write this comment 😅 Thanks for the support on the channel and other social media pages 👍👍

[@user-un5my5bw4j]

I too like the shinemate foam pads. The diamond pattern yellow, blue, and red. They seem to last a long time too.

[@fastmonaro05]

Well done mate. Seen a few vids of this polish via Apex Detail and it really goes well.

[@focusondetailing3855]

Thanks mate 👍👍

[@danlc95]

Through 2020 I tested a ton of compounds and polishes at work. I used most of the top end offerings from Jescar, Sonax, Menzerna, etc, etc. As of today I've either sold, or given away most of them. What remains is 3D - ACA500, One, ACA520, AAT502, Speed, and Optimum - Hyper Compound, Intensive Polish, Hyper Polish, and GPS. I did keep Meguiar's and Menzerna because I've used them for so long. Aside from the almost dustless nature of One, I love how far it stretches. After I load my pad (four drops) and complete the section, I can brush out the pad, and start with my next section without reloading. I can sometimes do that two or three sections until I need to reload with two small drops. This also makes for a very easy removal of the residue. I always account for the first initial section being a harder wipe off, but after that It's a breeze. Moving to 3D abrasives liquids was a game changer for me. Every wish I ever had for a compound / polish was delivered by them. The only one I didn't really care for was AAT501 compound. I may hive it another shot though. I found it to really gum up my microfiber pads, and load them up really quickly. It also has a really off putting after scent.

[@ABetterMeee]

Thanks for the detailed info 👍

[@KingRockets]

Can you use 3D One Hybrid on glass (windshield) and car door pillars? I'm looking for an all in one compound/polish that can essentially do the entire vehicle.

[@cheveresalvi]

I've always been a Scholl S20 black user for my One Step. But being mainly mobile the benefits of this are really intriguing me, I might just grab a bottle! Great review mate, new Sub.

[@jimmyjazz4605]

Hey Tim, how you doing? Love the video man 👍

[@gregsullivan7408]

The "One" doesn't mean "one step" - it means "one polish". I.e - change the aggressiveness by changing the pad only - no need to change the polish.

[@focusondetailing3855]

Thanks for clarifying mate 👍👍

[@danlc95]

That's it!

[@stevenwitte769]

What? I’ve never heard the term used that way and I been detailing 10 years. It’s always one pad one polish.

[@gregsullivan7408]

​@@stevenwitte769there's a first time for everything, eh?

[@patrickvennard838]

I bought some last week and yes it outperformed my normal polish Sonax Perfect Finish mainly due to removal and a complete lack of dusting.

[@focusondetailing3855]

This stuff does seem quite popular for those exact reasons too 👍

[@ABetterMeee]

Interesting video! I got me a bottle and 2 packs of SPTA pads, 4" mf & wool and 5" foam. I'm going to use the product on my car with a large cup of coffee and see the results. The coffee is for me of course 😅 Thanks for the video mate!

[@muggyJBeast]

Amazing video as always

[@focusondetailing3855]

Thanks mate

[@Danny-xj5ts]

Does this polish have fillers? Do I need IPA after polishing before applying a paint sealer

[@syedhamayon1331]

3D one is perfect for white car paint

[@pssita]

Got some of that recently. Gonna try it on my sons beater Hyundai Elantra before I use it on my Acura.

[@leonidias_sparta]

Can u do a review on graphine finish compared to ceramic coating. The 303 brand of graphene in particular

[@focusondetailing3855]

That would make for an interesting video and I've actually been wanting to trying it the new graphene spray from 303. Cheers!

[@macmacca659]

Awesome results!

[@focusondetailing3855]

Cheers!

[@AusMLE888]

Hey legend how are you doing. I am actually looking at starting to do this myself now on the family cars

[@benhubbocks3370]

Would you say that its best to use 2 separate polishes then? A cutting compound and a finishing one. I'm also just think about what you said with the pads. I have a large circle polisher and I got some rougher almost microfiber pads for it and some fur like pads. Whitch of these would you use for the cutting and whitch one for the finishing?

[@zachaubichon2837]

I find it doesn’t fully remove light scratches

[@SittingWithDogs]

Also you don’t have to wipe just go straight into polishing step with the compound product on the paint

[@Bdart93]

My guy sounds like the supercheap auto voice overs haha

[@cheveresalvi]

I thought the same thing 🤣

[@stangedude5646]

Orange pad.

[@jjjjjjjjjjjhjjjjjhjj]

What pad was used and how big of a section did you work in? Are there any fillers ? How does it compare to a sonax perfect finish polish