3D Pen and 3D Printed Fidget Spinners // FOUR Ways to Make Spinners

It's been several months and fidget spinners are still a big deal, so let's go ahead and look at a few different ways to make fidget spinners, including some new unique styles.
STL Files:
• Tinker Spinner : than.gs/m/920517
• Vortex Spinner : than.gs/m/917602
• Spiral Moire Wind Spinner : than.gs/m/917204
• Straight Moire Wind Spinner : than.gs/m/917205
Other Parts:
Full Ceramic Bearings on Amazon : amzn.to/2sZXmhE
Enter the Tinkercad Design Competition (ended) : goo.gl/SmXM5T
Get Make Anything Swag : goo.gl/16wz2r

[@TazerGlen]

"Fidget spinners" "How many viewers did I lose?" *lol*

[@MasterBlakeYT]

Ya, lol

[@nctamid604]

There should be rainbow filament, as in the filament is striped with the rainbow, so it comes out as a rainbow

[@Crits-Crafts]

I'm sure I've seen that somewhere... but that might have been on the fillastruder website, showing the possibilities of making your own filament...

[@Virolaxion]

Were there any more ways you could have fit the word "rainbow" into that comment?

[@nctamid604]

Yep. "There should be rainbow filament, as in the filament is rainbow colored, aka striped with rainbows. it comes out as rainbow colored and you can have rainbow prints.

[@Virolaxion]

You can't say "striped with rainbows" that's not fair.

[@e_vhutch3161]

Kai Olivier ö

[@shardaebrianna4324]

whenever i feel down i watch these saying to my self i can do anything😊

[@jappiemoto]

Hey man i just want to say 3 years ago i saw this video since then i started with thinkercad and im still using it to this day 3 years of experience in thinkercad lol and all because of this vid thanks alot man. Recently i have being accepted to a school were i’m gonna learn solidworks So finally an upgrade.

[@make.anything]

That's awesome! Congrats and thanks for sharing :)

[@kitsavastani2409]

you should make a fidget spinner like the one at 16:50, but the 3 bearings can move around in the spinner but they're still trapped. so that when it spins, it will show the forces pushing on them.

[@Cecona]

I don't care if fidget spinners are considered a trend, the need to fidget has and always will be around. I think this is awesome!

[@gabbyeebzie4103]

I didn't think I would actually watch this video but I decided I would and watched the whole thing. As cliché as it may seem, you inspire me. I want to be able to do the things you do and be able to create just as you do

[@x_teahoe8293]

i really liked the 3d one, its cool how you imbedded them and theres that triangle inbetween, looks awesome man, gj!!

[@floboy686]

X_TeaHoe they are all 3d

[@samuelforgie2771]

AjFlo718 *starts spinning a piece of paper*

[@easyluckable]

One of the most unique spinner video I have seen. Really wish I have a 3D printer myself.

[@salomeremaud178]

Once upon a time, Devin was still an innocent boy with no beard on the face. But one day, hairs grew. Now, Devin is a big boy 💙😂

[@kylecow1930]

me me big boy

[@stinkyanthony7435]

me me big boy

[@UglyFunnyMan]

me me big boy

[@quietsamurai1998]

Me me big boy

[@kaih5247]

Me me big boy

[@azimulhasan4391]

dude the 3rd one and 4th one were the best .dude make another video of anything similar to these pllllsss

[@RafidW9]

you are actually the only one who made fidget spinners tolerable. awesome job...

[@cameronskeem1860]

in tinkercad instead of eyeballing it you can put two rings on either side of the center one, then duplicate that twice an rotate them 120 degrees. Afterwards you can delete the three extra rings

[@shygamerz7529]

You kind of read my mind on the last one. In the thumbnail I didn’t realize why there was a round circle like one so I assumed it was a lightweight fidget spinner.

[@Bloodray19]

The single fidget spinner video i have ever watched. And i didn't regret it

[@fige0n]

i honestly like your spinner videos better than the others cause its so available to people and very customizeable. like .... how many people are gonna have a pile of brass and a place to melt metal, compared to people who have a 3d printer or pen?

[@AxolotGaming]

Am I the only one that says Cool the exact same time the intro does

[@purplelizard2348]

Yolp HD yes why

[@lauramacleod4822]

No I do too 😂

[@ruthbaldwin512]

Yolp HD no lol

[@dylan28thesnake58]

😀

[@dylan28thesnake58]

w

[@raposadislexa]

What do you like most? Solidworks or Fusion 360? Or it's basically the same?

[@LilSqueet]

I've used both and they're basically identical hah

[@nathanielcrowell822]

@@LilSqueet is fusion 360 or solidworks free?

[@tylerbingham7]

@@nathanielcrowell822 solid works is not but fusion is! As long as you use fusion for personal products and you make less than 100,000 dollars a year you can renew a free personal use license!: ) Also, he shows tinkercad. It's very basic, but I use it more often than fusion! It's also a very great intro to 3d design if it's new to you!

[@KJCoin]

Thanks to me having Comcast I have discovered that videos that mention Fidget spinners actually use a fidget spinner buffer! What has this world come to?!?!

[@solonharden7685]

hey man I have a bit of practice in tinker cad and it is easier to line up the spinner arms. If you had duplicated both the center bearing and first arm with the connectors and duplicated all of it, then rotated it by 120 degrees you can line up the center bearing hole very easily and when you merge it the overlapping part doesn't matter.

[@PikaveeT]

I think the embedded bearings spinner is the best out of all of these, because of 2 things: 1. The design is just so amazingly simplistic yet also so complex I love it 2. It’s the best to fidget with, because you can: spin it all, spin an edge, make a 1-wheeled car, rub it, shove stuff in the holes, etc.

[@theredstormer9963]

Tinkercad works quite well. I used it to make a REALLY complex one! It works well for really almost anything.

[@benjyletouffu]

I'm not into fidget spinner at all! but man, those designs of yours are SO COOL!!

[@killaclownp557]

Devin! The custom one you made with the 3doodler was amazing😍 Please make one for meee

[@jaccquee8664]

I glad you actually linked the kickstarter campaign

[@facefisted]

OH GOD. THE LOADING... CIRCLE THINGY. IT'S INFECTED WITH THE FIDGET SPINNER SYNDROME!!! 'Cool!'

[@LamaAlAyoubi]

ive never been more interested in fidget spinner models. 😍😳

[@IgorMarty]

Looking forward for this 3d mate base !

[@alphaplayzz1381]

you should have used an r188 bearing for the inner bearing on the 3d pen spinner for a longer spin

[@randomgirll3123]

some people are tired of it some people want more of it... it's a lose lose situation. Your take on the trend is pretty awesome and I don't think I've seen anyone else design ones like you have.

[@skateboarderptrblx1521]

OMG MY NAME IS IN THE CORNER AT 0:41 (bottom left corner) I'M SO HAPPY!!!!!!!!!!!!!!!!!!!!!!!

[@barmetler]

I used to absolutely hate those things. Because they were everywhere. But actually, I really like fidget spinners, now that I can look at them without prejudice... I really do fidget with everything, especially pens or my phone or the chords on my hoodie or whatever...

[@RedCocoon]

Can you 3D print a 3D Pen or 3D Pen a 3D printer

[@tristiansorigamiartsandcra1167]

What filimant did you use @Make Anything // 3D Printing Channel

[@Crits-Crafts]

number 3, with the embedded baring. You might want to add a support to the middle of the outer barings... if you fidget with the outer ones they will eventually work lose and fall out. With a support in the middle, they shouldnt... then again, I'd probably end up snapping that bit too lol

[@make.anything]

True, the added support couldn't hurt!

[@QazNotQuaz]

have you tried using SketchUp for modeling 3d prints? I'm just curious, it's the only software I have and I was just wondering what your thoughts on it are

[@Bmboo_]

make anything //3D printing channel do you think that using the third design you could put on small blobs from the 3D pen on the outer ball bearings to make a spinner where the arm weights are also spinners or spinsception

[@berfranper]

The galacspinner or however you're goona call it is the funniest, but I still love the vortex spinner, that steel filament is the perfect choice

[@magatsu82]

the last black and yellow spinner looks awesome

[@bodushkalenin1288]

Devin, you are my favorite youtuber ever! Keep up the good work!

[@MrKristian252]

best fidget spinner video I've seen.

[@suharsh96]

loved how you chose fusion and solidworks both for different purposes!

[@shaytso4613]

And do you have to 3-D printed or is it like delivered to you when you download it I don't understand how to download thing works

[@ovecka17]

I love your videos, they are some of the best videos on KZbin

[@danielz8186]

man this is an awesome video I really enjoyed it, usually I don't like long videos but this was really well done

[@account6555]

Why must you use the spiral power on fidget spinners?

[@evwbb]

Dude, you should totally make a fidget spinner!

[@thevortexcrafter7060]

*triggered*

[@leeayto9621]

stop

[@waaj123]

Is it possible to download the files from the 3d printer?

[@zitmi5580]

that last spinner was trippy

[@moderate_eaglegamingyt5468]

I love this channel so freakin much

[@danastriciptaningrum5101]

I'm not a fan of fidget spinner, but I have to admit. That embedded bearing one is pretty cool

[@blackassmagic]

I'm honestly sick of the fidget spinner trend but the way you explained it was well done. You've earned yourself an subscriber!

[@stefantomic1553]

hey i just want to ask, do you recommend 123D design?

[@purplelizard2348]

I dislike fidget spinners, but for you, I'm watching.

[@thellamacorn8902]

Omg, the loading dots is a fidget spinner in this video! Try it!

[@jackFPV442]

Are we you reviewing the micromake delta printed I think I saw it in in the background of one of your videos

[@camelpuncher95]

Niiice, Solidworks. Brings me back to 1st year in University.

[@hallcro123]

the only decent fidget spinner video.

[@VideoStefan17]

lol, reading the comments about how late into the trent you made that video about spinners - made me think: you are the Internet Explorer of youtube videos.

[@tarushgoel5030]

11:30 no there was nothing funky with the printer or the slicer, the funky thing was tinkercad. when you set the tube's wall thickness to two, it actually changed the value it proportionately to what was the size of tube before, 20 mm by 20 mm. when you scaled it to 26.5 mm by 26.5 mm it screwed up...

[@OneShotMan]

is there any chance do download the model of the fidget spinner on 13:50 pls o where can i find the format, cause i have a 3d printer but i dont jnow how to design xd

[@make.anything]

follow the link in the comments!

[@swishysdump6523]

How did you get the filament to stick to the bearings?

[@octodoodle]

Could you make a gear based robot similar to hex bug scarab ( If you don't know what a hex bug is search it up You will find it very cool and intriguing )

[@seanocansey2956]

you were one of the early guys to make a fidget spinner when you made your first one, weren't you? also I love your creativity in this channel

[@timonsmind6899]

Sean Ocansey Yeah, He was. It was the USB one and it's great!

[@klawz1801]

On your second fidget spinner, the bearings are 7mm thick so you should have made two of them that are 3.5mm thick and stuck them together

[@masterx3047]

What kind of 3d printer did you use?

[@breackersx]

where did you buy your internal bearing? the one whit the most speed?

[@Joseph27867]

what is the best software for designing things in 3D

[@colinchou5210]

Dang your good at this stuff I can”t figure out my three d printer what app should I use on Mac

[@trashdilan]

could you use 2 liter bottles for 3d printing?

[@pithon3d477]

Nice work .... keep them coming!

[@Its_an_advocardo]

On tinker car you can use a template on the website for forget spinners so you can just adjust the dimensions on it

[@haikalhaz1851]

Ayy that's some cool design

[@alexmacias1234]

How much time for the yellow one twisted yellow and black.

[@Catboya3ther]

This dude is a technical genius

[@Nickan.wav-]

why yes youtube i have wanted to watch a fidget spinner vid 4 years later

[@Gamer5934_]

Make anything could you make a finger board ramp because i own some finger boards and ive always wanted a 3d printer. So i was wondering if you could make a video with fingerboards in it that would make me happy.

[@ImpulsiveNebula]

If you have the wall thickness as 2, the inner diameter is 4mm smaller than the outside, not 2. That was your problem with the 2nd one.

[@make.anything]

oof, good catch!

[@nonstopp5005]

I don't even like fidget spinners, but it was nice to see the techniques you used!

[@dandolphs]

U HAVE NO FRIKEN IDEA HOW MUCH I AGREE!

[@jackreaper9230]

Could you not union the arms? In rhyno you can union things so it will pull them together

[@michael1234252]

I've made some in Google sketchup. But I don't have a printer to print them.

[@ArcticWolfSilver]

I think my fav is the one printed with the bearings encased. second fav is that final spiral turbine one. Where did you get those awesome white ceramic bearings?

[@make.anything]

They're on Amazon, they just cost a lot more

[@asyifakirana4209]

How is the emblem on your BMW holding up?

[@DesignTechie]

The embedded one is awesome

[@cubetube4088]

What's the difference between the 3doodler create and pro

[@shaytso4613]

I don't get how downloading works like what does it get downloaded to camera something like that

[@dheerajmadulkar9120]

what are the best settings for any 3d Print for slic3r ro other software

[@VictorEvangael]

I still prefer the springo design and the air powered tops. They were a hit at my local makerspace!

[@tehyamoore2515]

Store person: so what fidget spinner do you want? This guy: yes

[@breakdown4o148]

Omg I want those last two!!

[@justaguy6216]

I'm still learning Solidworks for University. Imma try this out on uni 3D printers.

[@RumerPriestly]

You could totally use those last two as garden decorations

[@tortellini6607]

I started using tinkercad A few weeks ago just for modelling stuff, not 3D printing.

[@federicovumbaca884]

you should make a tutorial about fusion-360 and how to use, it would be great and helpful

[@nathanielrussell2077]

I like the one that has the outer barings stick out. and you should also do a homemade fidget spinner give away

[@DawsonsMemes]

The old days when Fidget spinners were the kraze

[@Agamimg360]

O k boss so I'm a new subscriber and am wondering if you have done or might be into doing anything with robotics

[@walterpersson9175]

Whitch printer do you have

[@GustavandHilda]

Now, mount the wind powered one somewhere and start it up using a compressor! Then we'll see for how long it will spin! 😄

[@aQuayQuay]

I'd add it to my satisfying video playlist!

[@dralex4830]

Umm, can you give me a link for the free version of fusion 360 because I can't find it

[@cyanpepper107]

www.autodesk.com/products/fusion-360/students-teachers-educators there's the link. it's technically free for students/teachers/educational use only, but as long as you aren't doing anything professionally, you can pretty much do with it as you wish. you'll need to create an autodesk account and do a couple more steps, but it's a lot of fun in the end and pretty easy to use once you get used to it. Enjoy!

[@dralex4830]

Thanks!

[@make.anything]

+Jon Ripper also free for professional use if you're earning less than $100K :D