3D Piping Routing, Add Valve, Fitting to Pipe - Lesson 8 of 13

Welcome to “Learn AutoCAD Plant 3D in Minutes!”
This is one of a 13-lesson of Free Online Course (FOC) designed to help you learn the basics of AutoCAD Plant 3D. With each lesson lasting no more than 10 minutes, you can easily fit this course into your busy schedule and learn at your own pace. The course will be conducted live through Zoom meetings and KZbin Live, giving you the opportunity to interact with the instructor and ask questions.
In this Free Online Course, we will be focusing on “3D Piping Routing, Add Valve, Fitting to Pipe”. Getting this step right in the CAD design process is imperative.
Join Next FREE Online Course
acadsystems.co...
For more info, Call: [phone] (Kuala Lumpur), [phone] (Penang)
#acadsystems #autodesk #3d #piping #valves #routing #autocad #plant3d #premiumtraining #AutoCADSpecializedToolset #3D #autodeskgoldpartner #autodeskauthorizedtrainingcenter #autodeskauthorizedcertificationcenter #autodeskmalaysia #TrainingCentre #AutodeskCertified

[@ALFURQONTAWABI]

thanks sir

[@acadsystems]

Hi @ALFURQONTAWABI . Thank you for watching our video. Check out our website for more FREE ONLINE LESSON > acadsystems.com/events/ . If you have any topic you're interested in, let us know! Don't forget to like, share, and subscribe to our channel.

[@Dean.Michael.Winchester]

Kalo kita buat paip panjang mcm kat 8:52, then ada paip section yg kita nk besarkan leh ke? Mcm mana caranya?

[@maheshkkhandale651]

Hi, nice explanation. I have put nozzle on equipment and I have to route from that nozzle, but it is giving error,.l don't found same specs (as that of pipe to route from that nozzle) of nozzle in inserting nozzle. How to make same specs of nozzleas that of pipe in inserting nozzle

[@acadsystems]

Hi @mahashkkhandale651, thank you for the question. You can try finding the solution here: www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Cannot-add-pipe-to-equipment-nozzle.html Meanwhile, don't forget to like, share, and subscribe to our channel. Thank you.

[@TheMichaelJ1993]

Hi, how may I turn on windows for entering the distance of placing the element from the ends of the pipe?

[@acadsystems]

Hi @TheMichaelJ1993. You can go to Drafting Settings > Dynamic Input > Tick (/) Enable Pointer Input. If you are interested in more Free Online Lesson, you can register here acadsystems.com/events/ . Thank you for subscribing to our channel! Don't forget to like and share this video.

[@TheMichaelJ1993]

@@acadsystems Thank you, I was able to solve the problem by pressing F12 :)

[@Dean.Michael.Winchester]

Box nak tulis distance tiba² hilang, kena tulis dlm command box. Mcm mana nk dapatkan balik box tu?