3D Printed 15'' Hulk [Time-Lapse] AirBrush+Jeans | Now ARTFX Statue

3d printed on my wanhao d5s in P.L.A and scaled up to a huge 15'' tall and it printed really well. This is my first project that I have ever airbrushed and it came out great I also finished the model with a real pair of jeans with battle damage and they look great. Hope this video helps you with your build.
I would like to thank 3DWP and koch2k for sharing this file you can download the STL here:
____________________________________
www.thingivers...
____________________________________
www.thingivers...
____________________________________
Music
Check out Nstens1117
/ @niallstenson
__________________________________
The Incredible Hulk Theme on Guitar
• The Incredible Hulk Th...

[@IamGruntonHGH]

Hulk's pants are PuRpLe. TRIGGERED

[@FilamentForge]

I should of put a trigger warning in the video now I'm triggered that your triggered cheers

[@Oozaru85]

Watching those bottles wander over the table by themselves is almost more fascinating than watching the painting process, lol.

[@johnjpmiller3098]

the best part is when the compressor kicks in and makes the stuff on the table "dance"

[@gizzymeows5847]

Everything was done perfectly, the detail of the pants was great idea. Impressive 😊

[@GFF22003]

Great job and effort, especially for your first airbrushing project. Thank you for sharing!!

[@Advection357]

Finally someone that actually paints and finishes a print

[@embie8350]

BEAUTIFUL WORK!!!! Nice technique...

[@blizatrex]

Well done. The real fabric of the pants elevates it from just a painted print.

[@FilamentForge]

It does... its a shame more prints cant incorporate this type of thing thanks

[@litocheeto]

The air brush is amazing... and it's your first time... your amazing

[@FilamentForge]

Thanks pal appreciate it

[@funclay264]

Unbelievable work!! 👏🤝👍

[@FilamentForge]

Thank you! Cheers!

[@cliftonsharp9088]

Very nice job. The print looked great and the paint for a first time at the airbrush, is very good!

[@JohnKrieger]

great video thanks for showing how tedious and thorough this should be

[@ryanmikes5644]

Great printing, I love the statue. I personally would make the green skin a little bit darker. Great work.

[@barrymcbruce]

Super great tip on the masking tape around the seam lines.

[@FilamentForge]

saves on a lot of sanding cheers

[@allansilva6932]

There is nothing to say ... a great and perfect job and with all the details. It is unfortunate that someone still does not like it, it is the perfect replica of the incredible Hulk, better than the toys sold in stores. God bless your hands! Aloha, my friend!

[@FilamentForge]

thanks pal

[@mohitsumitchannel6584]

Amazing model hulk 3d printed Wark machine

[@LlywiRipper]

its like hulk is shocked and frozen

[@SEAC_1986]

Amazing job!!!! very very well done SIR!!!! congratulations!!! i love it!!!!

[@Battlecat84]

I don’t comment much on here, but this deserves recognition. Truly incredible watching it all come together. Great GREAT work !

[@FilamentForge]

Thanks pal

[@Blue4736.]

You've got some skills. Great work. 👍👍🔥🔥

[@FilamentForge]

Thank you

[@dodobarbar]

BUUUUAAAAAA hahahhahha!!! Fantastic. I especially love the denim part. Well done! Thumbs up.

[@Ishowspeedlive-j6q]

Apart from the eyes, wow man great fucking job

[@FilamentForge]

Cheers the hulk buster is on my to-do list as for the eyes they have been fix

[@johnhamilton7124]

WOW! What a fantastic job and detail!!👍

[@therealDonMac]

I was skeptical along the way, but turned out absolutely amazing!

[@FilamentForge]

thanks pal I was a bit unsure with it being my first time airbrushing

[@scruffsbycartoonfish2301]

Very impressed, first time airbrush job is good, cool you made him some jeans!

[@FilamentForge]

scruffs thanks pal

[@FreedomYak]

Nice work. The distressed jeans was a nice touch. As they say in Auto painting it’s 90% prep and sanding 10% paint. You did well in prep which made for a nice clean model. Impressive.

[@FilamentForge]

I few years back I changed the colour of my car and that process taught me a lot. cheers

[@-MrFozzy-]

Very nice tip with the masking tape. It’s pretty genius

[@DocStrange30]

This blows my mind. I want one so bad.

[@AlliDelta]

Been painting figures for a good while and usually the best way to achieve shading with the least effort is to undercoat black, then basecoat in a colour too dark then ink then hi light. This is the method I use when airbrushing tanks.

[@FilamentForge]

thanks for the tips

[@NunYaBiz1313]

Black or Dark Brown always works

[@rogerramjet69]

you sir are a legend... fantastic job and loved it.

[@KiNGxMusik]

sick. nice project. thanks for sharing!!!

[@SiFiGamer2016]

Yooo, the electric guitar song from the original 2008 Hulk movie go hard! Good video! 😎♥️👍👏

[@FilamentForge]

Yes! Thank you!

[@SiFiGamer2016]

@@FilamentForge Anytime 👍😉

[@johnnyseawalker3634]

I would totally bust the head off and modify to make a Hellboy figure. Thanks for sharing! Never knew the sandpaper bit. Wow!

[@dahur]

Good job..looks great.

[@kroger8507]

what an epic , the other day i might probably do this like urs

[@eljeje72]

Nice Job! the final result looks amazing

[@MichaelFlowersSTL]

Wow! Great work! Nevermind my question, guessed at the name of the filler and got it right. Isopon. Very cool. Definitely getting some of that. Thanks for the video!

[@FilamentForge]

Thanks pal...You can find the filler in Halfords if you live in the uk

[@MichaelFlowersSTL]

Filament Forge In the US. Closest place that sells it is over 100 miles away. Bondo is the more common name of it here so I’ll pick up some of that. Thanks!

[@T-800..]

That's.. Incredible! 😉 Awesome work, sir.

[@avieyahmoh8908]

You are more like the the guy who fix woody with air brush haha .. good work

[@FilamentForge]

THANKS PAL

[@marcus_w0]

What a hell to print. Cudos for that! Thumbs up.

[@xksander]

WOW! Amazing & great work!

[@NickNick-de8pd]

Favoloso!! Potresti fare pure le altre versioni di Hulk ..... Bravissimo

[@P3LUAAAJ]

seguramente no me entiendas mucho pero te cuento que la primera vez que vi tu video fue antes de comprarme mi primera maquina, hace ya un poco mas de un año... hoy en dia imprimo en muy buena calidad y lo vuelvo a ver para ver tu post procesado e intentar hacer algo parecido... gracias por ser parte de las personas que me mostraron este mundo hermoso que es el de las impresiones 3D

[@MNDarkfire]

Oh cool! I have a life sized statue of the hulk outside my school in the exact same pose.

[@FilamentForge]

is it 3d printed

[@ileana_y_hugo]

Went the extra mile with the shorts... 👍👍

[@SRshinoda]

All good... Except for the eyes and teeth

[@KamiSeb]

@pvzgeek No, he means the eyes and teeth are done badly. Which I agree with

[@silversrayleigh8980]

ya thats what i saw right away...

[@harvey4281]

HULK IS THERE

[@harvey4281]

Hey

[@rietzhu]

it's more toon like, maybe he was going for that look, definitely looks different from my kotobukiya.

[@jaimegarcia-yz1rm]

AWESOME I want one for my birthday

[@YHFiguremaker]

Awesome statue. It will not be easy to clean the surface of the fdm printer's output. I am working on resin printers mainly because I am working small and precise. I want to try the fdm printer for big work later. Thank you.

[@straightshooter395]

great for first time airbrushing!!

[@petrofsko]

Nice hulk model looks cool and ready for carnage

[@uncledarren4262]

Beautifully painted. I'll wait to buy a 3d printer untill it can print that statue in full colour

[@andreprado9489]

Congratulations brother!

[@gp-ozipainta729]

Fantastic work man! Really awesome job, loved how well you sanded and smoothed the joints, made a great finish!!

[@FilamentForge]

thanks its one of the few things I'm good at cheers

[@tillfromberlin]

awesome! so much work.

[@FilamentForge]

Tillfromberlin it's only work if you don't injoy it cheers

[@Ultimaniacx4]

I'd be too nervous just trusting glue to hold together a part with no pegs. If it drops or falls it could come apart. A good thing to join parts like that with pla is some kind of solvent cement like Weld-On. It welds plastic parts together for a super strong joint.

[@andrewgibbons7465]

Amazing work mate

[@mythos000000025]

Masterful, congratulations on a fine piece of art

[@blazzz13]

Amazing dude. Well done

[@tobiuslunar5348]

Sir you did a great job, don't pay any mind to the armchair critics out there, if your happy with your work that's all that matters.

[@FilamentForge]

thanks pal most give some good advice there the ones that count cheers

[@glitchtime404]

I agree by the way Ray Smith was really mean

[@stefman1231]

@@FilamentForge good job man looks solid. I'm no master painter or anything but I do wounder how it would look with some black wash applied to really make the raised muscle pop and add some shadow. Again great job man I've never airbrushed before you made it look easy to pick up so I think I'll have a go :)

[@Johnymetalification]

amazing job

[@IAAGermany]

Mega gut gemacht

[@MeineVideokasetten]

Wow! I love this sulpture. Great job, Sir!

[@patchtechuk]

If my first attempt comes out any where near this id be happy, great job fella!

[@FilamentForge]

Thanks pal just do your best

[@theGermanPrintingNerd]

Looks absolute Awesome

[@2000fer]

Excelente trabajo! felicitaciones!!

[@andypodmore6721]

Superb model. The end result is just fantastic.

[@FilamentForge]

thanks pal

[@uprzjustkozz5233]

Great job!!

[@agepbiz]

Great job! I l especially like the pants

[@jescowan26]

A good sanding tip is to glue sandpaper onto a pencil or even bamboo skewer for a cheap disposable tool a couple dabs of ca glue at the ends that begin and end the sanding cycle, even gluing old spent paper onto new stuff can give you a firmer/ thicker paper for tricky spots. I really enjoyed this video thanks mate

[@FilamentForge]

thanks for the tip I will keep that in mind cheers

[@martinroskilly9994]

Wow, what a hobby; well done.... really enjoy this. 👏🏻👏🏻👏🏻

[@gavinstarr7172]

Truly the best thing you have done in this channel. Keep up the good work and never let the small things stop you from reaching your dreams. (edit) you also earned a sub

[@FilamentForge]

Thanks pal

[@sungods-fh1xu]

Nice work!

[@cybernetix86]

This is really good! Looks awesome with the pants. After your first green coat i was not sure about the color but with the shading added, it's perfect!

[@FilamentForge]

thanks for the comment....I know what you mean with the first colour air brush paint is a bit deceptive the colour changes when you apply more coats didn't know what to expect really.

[@cybernetix86]

BTW that primer seems to be doing an awesome job. How expensive is it in your country? If I get that on Amazon it's around 60-70 us$ ...

[@FilamentForge]

£16 which I think its worth it but 60-70$ I don't think I would pay that also found it on amazon for £13.99 here's a link just encase you've found the wrong one www.amazon.co.uk/Aerosol-Primer-sanding-economical-repair/dp/B01MS9Q49Z/ref=sr_1_13?ie=UTF8&qid=1510890097&sr=8-13&keywords=u-pol+primer

[@cybernetix86]

I had the right one but I'm in Canada and they don't ship here. The primer I have is doing a okay job, but yours seems to cover much better.

[@FilamentForge]

that's a shame because its a really good primer goes on thick does a good job at hiding layer lines

[@mrkookalabanza]

Loved it! For all us Americans, "Fairy liquid" = dish soap.

[@diaperrash8952]

Ahhhh thanks - that one had me totally confused

[@shughalonly4724]

Excellent work done ... pupil size can be increased for even better look ... keep up the amazing effort

[@FlyB4UDie]

Looks really amazing, great work 👍✌️

[@maddrichstaks7787]

For 1st time doing it..came out great

[@LivingintheVan]

Amazing job! Thanks for sharing.

[@jhonvictor1335]

I never see anything like this congratulations dude !!!

[@alexhetherington8028]

Wow this is great.No way this is your first airbrushing project,its too good.Ha ha ha.I love that his shorts are real material ,some people dont like mixed materials on statues but I think it's the best.Im making a predator bust myself and this project has given me alot of motivation for it.I only hope it will turn out as good as your project.

[@FilamentForge]

awesome is it a 3d printed bust

[@alexhetherington8028]

@@FilamentForge yes it will be about 20 inches high with a custom jungle diorama base on top of a custom predator style armor base.It will be my first ever bust and first time working with 3d printed materials.Do you have any hints and tips?

[@stephenbatchelor7400]

How do you only have 382 subscribers? Awesome work!

[@FilamentForge]

I have only been on youtube 5 months and its a big platform thanks for the comment

[@joeyjoey9526]

This is really cool!!! Great job I subbed 😃

[@jujuliencollection]

c'est vraiment un très beau travail vraiment GG

[@HalyconDayz620]

Real good job. Nice work.

[@paulwin6741]

not bad with the making of jean + belt.

[@carl9910]

Great work, hope you do more...

[@FilamentForge]

thank you

[@grgpahljina6145]

That's freaking cool

[@mikerenda3132]

Great job.

[@Dudeiculas]

Great work awesome

[@giantrob5390]

Nice! Maybe a 3D printed buckle? Awesome job!

[@jax8325]

You did REALLY good for what I think you said was your first airbrushing. I think the face needs a good bit of work still (especially the teeth) and the skin still needs just a bit of work. But it's still pretty awesome. (especially the pants)

[@FilamentForge]

THANKS PAL

[@Jenuelrg]

It's a really nice job, but the eyes and teeth... WTF! Thanks for the video!

[@StarLabs3D]

Awesome!

[@gdanielhoracio58]

congratulation, really nice

[@tooreosonecup4995]

Dude this is so F***ing cool! This video convinced me into buying a 3D printer as soon as possible

[@FilamentForge]

thanks pal I appreciate it

[@DrShwifty]

did you buy one?

[@jitendramaurya5766]

It is very amazing

[@dopetrailerz9938]

dude during the timelapse it was really freaky how the blue bottle was moving by itself lol

[@FilamentForge]

vibrations

[@lotuschile]

NICE WORK, CONGRATS ON HAVING THE PATIENCE TO SIT THROUGH THE PRINT PROCESS. BEING ITS YOUR FIRST TIME AIR BRUSHING, CAN YOU GIVE A REVIEW ON THE ONE YOU USED? THUMBS UP.

[@madeinuk68]

Really great job,but for me the skin needs a lot more work,which I think would be better if you added texture as it still has some what of a plastic look to the overall finish. There are some great tutorials on KZbin. I have seen some where they use something like a toothbrush to speckle different colours,to give a very realistic skin texture. I don't mean to be negative,I just think that you could make the model look even better. I was really impressed with the way you made his jeans though,it is so much better than a painted version. Keep up the great work,and I look forward to seeing more of your work. And thanks for sharing this.

[@FilamentForge]

thanks for the comment I know what you mean with the plastic look and in my research before painting him I found a KZbinr that airbrushes huge hulk models and uses the toothbrush effect I was thinking of weathering him with some watered down black paint but I guess I didn't what to mess up what I had all ready done. cheers

[@babaji389]

Awesome..very brilliant job n skills that i dont have :p .....I don't mean to be negative...get orignal statue u will get idea what is missing ....everything is ok but plastic look not suit that beautiful statue...in my opinion just give little extra detailing n this statue will best ever....once again very wonderful work :)

[@MushyFunguy]

looks AWESOME!