3D Printed Homemade Nerf Gun Version 3 | Magazine Fed

  Рет қаралды 19,571

Martin England

Martin England

Күн бұрын

Пікірлер: 62
@robertcarter7566
@robertcarter7566 7 жыл бұрын
ok, I have to give lots of props here. never in a million years would I have thought about using lego gears in a homemade dart blaster. Seriously the grey gear at 1:14 is Lego. that's epic
@LordDraconical
@LordDraconical 8 жыл бұрын
Seems like you should be getting way more power out of a plunger that size? Need me to mail you a k26? I'll do it
@MartinJEngland
@MartinJEngland 8 жыл бұрын
The seal isn't the best at the moment. I need to put some more epoxy around the bushing.
@MartinJEngland
@MartinJEngland 8 жыл бұрын
Thanks.
@mizterwizter
@mizterwizter 8 жыл бұрын
Design/Forge you need to open an etsy store
@alexpoole2003
@alexpoole2003 8 жыл бұрын
LordDraconical hello!!!
@spoonbruh741
@spoonbruh741 8 жыл бұрын
HI LORD!!
@stuartmatthews91
@stuartmatthews91 6 жыл бұрын
The reverse plunger is making it way harder to prime than what a direct plunger system would. I think you are losing efficiency in the turn as well. The mag feed system is very clever, check out angel breeches for longshot's. You could attach a cut brass tube to the female part of your upper seal and arrange the barrel so it slid in like an angel breech does. When slid forward or primed on this guy it would open the slot and let 1 dart in, close fire and repeat. Would give the darts a better stop that forced them to feed directly into the barrel too. that way you don't have to fumble them in like you do now. might fix your seal and give the mags something to grab onto too.
@SparkysAdventure
@SparkysAdventure 8 жыл бұрын
I knew you had potential ever since the Rapidstrike stock to Stryfe integration. But this is like Make.Test.Battle. level. You are the start of a new generation. This is truly next level.
@arkwave2356
@arkwave2356 8 жыл бұрын
Dude that is amazing that looks like a stock blaster from the rival series
@somethingspecial4053
@somethingspecial4053 7 жыл бұрын
How much would it cost for one of these... I need one now
@meroastisruined3039
@meroastisruined3039 7 жыл бұрын
Oh man I have to have one, oh wait I'm poor, also it looks like it has a little bit of a seal problem but this thing is actually amazing and that plunger tube is massive and in need of a k26, really nice job man
@MartinJEngland
@MartinJEngland 7 жыл бұрын
Hopefully I can get a better seal on the next one. It's mainly leaking out of the bushing.
@TheStoneAxe23Animation
@TheStoneAxe23Animation 8 жыл бұрын
Yo this is the coolest stuff I've seen in a while HOLY heck.
@MartinJEngland
@MartinJEngland 8 жыл бұрын
Thanks.
@ballybegproductions166
@ballybegproductions166 5 жыл бұрын
This is amazing please continue to build things like this
@BrodieReed
@BrodieReed 8 жыл бұрын
I know im a little late to this video... BUT, this is insanely cool man, you are litterly the man at creating custom nerf blasters!! Well done bro!
@MartinJEngland
@MartinJEngland 8 жыл бұрын
Thanks. It came 2nd in the 3D printed nerf gun competition too.
@BrodieReed
@BrodieReed 8 жыл бұрын
Congratulations man!! You really deserve first place though..
@nerfnerd123
@nerfnerd123 8 жыл бұрын
you printed an entire Nerf gun? thats awesome. keep up the good work.
@fincost3001
@fincost3001 8 жыл бұрын
Nice priming posture lol ,great video👍🏼
@ethanpeach8216
@ethanpeach8216 8 жыл бұрын
The handle reminds me a lot of a Apollo handle, which I find comfy, great build though, I'm guessing it works with a 35 & 25 drum?
@MartinJEngland
@MartinJEngland 8 жыл бұрын
It is a large handle which I drew out on paper first to know the proportions. Yes, it works with all magazines, however stefan darts only work with special modified ones.
@ethanpeach8216
@ethanpeach8216 8 жыл бұрын
I have tried just for fun to use stefans in a normal magazine with most of my blasters, they don't work either, and if you drew that handle I'm starting to think you are a secret Nerf employee
@MartinJEngland
@MartinJEngland 8 жыл бұрын
No, I'm not an employee... ... yet.
@Rmods74
@Rmods74 8 жыл бұрын
Very cool design. What was the print time required for that?
@MartinJEngland
@MartinJEngland 8 жыл бұрын
About a week.
@mingaangpark5840
@mingaangpark5840 8 жыл бұрын
even with the printing files, does this mean we have to purchase all other necessary parts and screws to create this blaster? Oh and great concept and video!
@jonathandidion462
@jonathandidion462 8 жыл бұрын
Holy crud that is freaking awesome! I understand you have a ridiculous amount of time put into that, but will stl files be available for this in the future?
@MartinJEngland
@MartinJEngland 8 жыл бұрын
Check the description.
@KellenBluestein
@KellenBluestein 6 жыл бұрын
This is incredible!
@OCNerf
@OCNerf 7 жыл бұрын
This still has me impressed.
@theironmanderin9308
@theironmanderin9308 8 жыл бұрын
The next generation nerf raider
@parsonide
@parsonide 6 жыл бұрын
Is that kid you ?
@jrbocito
@jrbocito 7 жыл бұрын
You are very creative thats good
@kchinz34
@kchinz34 7 жыл бұрын
Nice job dude. Having LordDraconical comment on your video isn't something that happens to everybody!
@Bleenga
@Bleenga 8 жыл бұрын
Spectacular, yes!
@MisterNathan
@MisterNathan 8 жыл бұрын
Most impressive.
@MartinJEngland
@MartinJEngland 8 жыл бұрын
Thanks.
@noahlowrie6742
@noahlowrie6742 8 жыл бұрын
is it possible to switch the magazine
@noahlowrie6742
@noahlowrie6742 8 жыл бұрын
magazine well
@MartinJEngland
@MartinJEngland 8 жыл бұрын
Yes, but what would that be useful for. It won't work with Mega darts or rival rounds because the barrel is too narrow.
@noahlowrie6742
@noahlowrie6742 8 жыл бұрын
I meant to the other side
@MartinJEngland
@MartinJEngland 8 жыл бұрын
Oh, no that is not possible at the moment. I designed it for right handed people. However, in the 3D printing software all you'd need to do is flip about 4 pieces and it would be on the other side.
@stephenchow6749
@stephenchow6749 7 жыл бұрын
Having trouble with the draw weight there? ;D
@kys6701
@kys6701 7 жыл бұрын
Can u make a bullpup
@moneycat1570
@moneycat1570 7 жыл бұрын
Mr Destroyer it is a bullpup
@szymonmarczyk9875
@szymonmarczyk9875 7 жыл бұрын
amazing
@joshua5483
@joshua5483 7 жыл бұрын
Sell these muh dude.
@timweilacher6457
@timweilacher6457 7 жыл бұрын
Are your hands cold while shooting?
@LMvdB02
@LMvdB02 8 жыл бұрын
maaaaaaan
@LMvdB02
@LMvdB02 8 жыл бұрын
you deserve so much more attention, this is amazing
@MartinJEngland
@MartinJEngland 8 жыл бұрын
I'll need to figure out a consistent schedule before that as I'm pretty much only uploading one video every 3 weeks.
I 3D printed my own Nerf Gun
3:42
Roboterror
Рет қаралды 38 М.
[REVIEW] Spring Thunder | SUPER COOL NERF SHOTGUN!
11:11
Coop772
Рет қаралды 7 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 33 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 55 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 148 МЛН
3 Hours vs. 3 Years of Blender
17:44
Isto Inc.
Рет қаралды 6 МЛН
Nerf Magazine Overview | WHICH MAG IS BEST?!
13:01
Coop772
Рет қаралды 3,4 МЛН
Nerf War: First Person Shooter 6
7:32
PDK Films
Рет қаралды 213 МЛН
Building a Homemade Backyard Climbing Wall (from Start to Finish)
15:39
I made a fake CRT TV with a LASER
16:05
bitluni
Рет қаралды 605 М.
Recreating a Banned Toy from the 1980s
10:44
electrosync
Рет қаралды 1,9 МЛН
Secret Garage Update #13 See THROUGH the Rock with 3D Scanning
28:41
2 Much ColinFurze
Рет қаралды 789 М.
NERF MOD: "Hex" by Eli (Extreme FPS Brushless Rayven)
7:16
OUT OF DARTS
Рет қаралды 285 М.
11 Types of Suspensions for Lego Technic - Making and Testing
11:32
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 33 МЛН