3D Printed my own LUFFY statue in GEAR 5 | One Piece

Timelapse of 3D printing and painting Monkey D Luffy in Gear 5 Sun God Nika from the anime and manga One Piece by Eiichiro Oda sensei.
SUBSCRIBE: bit.ly/40gwto3
Patreon: / tinylittles3d
Free Discord Server: / discord
Resin figure printed on the Elegoo Saturn 2.
Paints used to complete the resin statue were a mix of vallejo acrylic paints, Army Painter Speed paints, Vallejo Xpress colors and Citadel Contrast Paints. These paints are popular among the slapchop painting method where it is a variation on zenithal speed painting.
The Iwata eclipse airbrush was also used to create smooth blends and glazes for this concept art.
#3dprinting #painting #anime #manga #onepiece #luffy #gear5 #sungodnika #timelapse #relaxing #toys #collection #speedpaint #geek #resin
☺ 3D file ☺
/ kaidan3d
⭐My Gear (US) AFFILIATE LINKS
📷 Camera 📷
Camera Sony ZV-E10: amzn.to/3MQ1o7A
Lens Sigma 18-50mm F2.8: amzn.to/3PlQ4j1
🖨️3D Printer & Resin🖨️
Uniformation GKtwo : amzn.to/3Uoq7D8
Elegoo Saturn 2 3D Printer: amzn.to/3ZHIsKP
Elegoo Cure and Wash station: amzn.to/44XNV2G
Sunlu standard resin: amzn.to/47QIBB1
🎨Paints🎨
Vallejo Fairy Flesh Set: amzn.to/44jEaNu
Vallejo Starter Set: amzn.to/3nItZB8
Army Painter SpeedPaint: amzn.to/3MllAxI
Vallejo Express Colors: amzn.to/3rlS1ny
Citadel Contrast Paints: amzn.to/3LoAYrK
🔫Airbrush🔫
Iwata Eclipse Airbrush: amzn.to/40TZaZ3 (US)
Airbrush Compressor: amzn.to/3PE62Gy
Airbrush Cleaning pot: amzn.to/3EDV51A
3M Respirator (Mask) : amzn.to/3ZmYprb
Respirator Vapor Cartridge (For Painting): amzn.to/46j4ast
🔧Miscellaneous🔧
Nail Dust Collector: amzn.to/3W20aKZ
Paint Rack: amzn.to/3PF8L2G
Airbrush Cleaner: amzn.to/48ibRAQ
Thinner: amzn.to/45UaLtk
Flow Improver: amzn.to/3PIiJjV
Surface Primer: amzn.to/3RqrfFs
Matt Varnish: amzn.to/3sY8WNC
3M Particulate Filter (For Sanding): amzn.to/3TKB6a9
🍁My Gear (CA) AFFILIATE LINKS
📷 Camera 📷
Camera Sony ZV-E10: amzn.to/3xU1CVA
Lens Sigma 18-50mm F2.8: amzn.to/4dz0HKT
🖨️3D Printer & Resin🖨️
Uniformation GKtwo : amzn.to/4aUOfTR
Elegoo Saturn 3 Ultra 3D Printer: amzn.to/4dmflVn
Elegoo Cure and Wash station: amzn.to/3xU2ae6
Sunlu standard resin: amzn.to/4doLDzl
🎨Paints🎨
Vallejo Flesh Set: amzn.to/4a2QfIv
Vallejo Starter Set: amzn.to/44k5HPb
Army Painter SpeedPaint 2.0: amzn.to/3UknoJW
Citadel Contrast Paints: amzn.to/4dknE42
🔫Airbrush🔫
Iwata Eclipse Airbrush: amzn.to/3wi9hgc
Airbrush Compressor: amzn.to/3JDjnv8
Airbrush Cleaning pot: amzn.to/3JJkf1o
3M Respirator (Mask) : amzn.to/3wejXfK
Respirator Vapor Cartridge (For Painting): amzn.to/3UpS8sX
🔧Miscellaneous🔧
Nail Dust Collector: amzn.to/3UESi0I
Paint Rack: amzn.to/3Wg2xdg
Airbrush Cleaner: amzn.to/3UGZBVY
Airbrush Thinner: amzn.to/3WqyvU7
Flow Improver: amzn.to/3UDt3Mu
Surface Primer: amzn.to/3WqyI9R
Matt Varnish: amzn.to/3Wm4K6L
3M Particulate Filter (For Sanding): amzn.to/49VW2PP
☆ SOCIALS & CONTACT ☆
+Instagram: / tinylittles.yt
+Twitter: / tinylittlesyt
+E-mail: [e-mail]

[@slickrick1856]

Wow, it came out amazing

[@TinyLittles3D]

Thank you so much, cheers!

[@dilshanmalaka705]

Hats off to one quality output 🫡

[@raimb3948]

The eyes are differently wrongly painted, but the rest is perfect

[@optie5]

Using clay to cover up parts that you dont want to paint. Very smart

[@JR-je7ce]

There's another guy I watch that uses silly putty

[@solesensei8051]

I work in the 3D printing industry, primarily DMP but I do a lot of SLS and SLA as well. This is something I’ve always wanted to get into 🔥🔥 great work

[@kennyjustice2252]

Dude how the freak didn't I see this! I missed two of ur videos! Wth! Lol I feel bad missing then! But with that rant gone, this is just another great job! Nice touch on music and neat to add some flavor with a lil bit of chatting! This is beautifully done!

[@TinyLittles3D]

No need to feel bad! You're here now!

[@crazyssn]

bro why is your voice so charming

[@TinyLittles3D]

Because viewers like you are also so charming

[@BlazingBlazer1]

Looks amazing! Curious as to what’s the spinning plate you prime him on? Looks super helpful

[@TinyLittles3D]

It is incredible, fairly cheap too! Here you go my friend: amzn.to/3PKhMr2 (affiliate link, won't cost you anything extra, but will support my channel)

[@jacksplicer0292]

Just got this from kaidan this morning

[@TinyLittles3D]

Sick! Have fun painting it! It’s a great model

[@nekofigurine]

I think we're all excited for Luffy Ultra Instinct!

[@TinyLittles3D]

I guess white is the ultimate hair colour.

[@karstenbroda5752]

Wie groß ist die Figur und geht es noch größer mit Resin ​@@TinyLittles3D

[@TinyLittles3D]

@@karstenbroda5752 if I recall, it's 1/8 scale. It is printed with resin and you can scale it much larger if you want to

[@owendayan1613]

Please my friend make videos of all the stuff and names of the stuff you use for painting your figure it’s crazy ❤

[@loke920]

спасибо!

[@juancmp589]

hi , What is the name of the putty used to protect areas that you don't want to be painted?.

[@Animencanta]

AMAZING!! Where I can find this model?

[@kypdurron6168]

i 3d print resin prinst now for severeal years and no, i dont know theat resind printing needs to be sanded at all if supported good. so tell me why

[@user-sz8qy2ol5w]

Beautiful print and finished piece! Just curious, what is your favorite type of resin to use for these prints? Also, can you tell me what that type of clay or putty that you use to cover different parts when airbrushing?

[@TinyLittles3D]

Thanks for the kind words! As for resin, I recently switched to SUNLU standard resin. I print a lot and they are the most affordable while also being very good quality. It also smells much less compared to Elegoo abs-like. For masking, I use poster putty.

[@Papanuisfynest1]

Bluetac

[@formaten]

What brush are you using (model and size) when detailing the face? min 2:35, those black strokes so thin and precise, amazing work. Thanks for sharing this beautiful work.

[@TinyLittles3D]

I use brushes from Rosemary & Co Series 33. Size for detailing is 2/0. I do want to get something a bit smaller though. As for the thin black strokes, my tip for you is to use inks. It flows off the brush super smooth for small lines. You could also try mixing regular acrylics with flow improvers.

[@maddest19]

Amazing

[@TinyLittles3D]

Thank you so much!

[@maddest19]

@@TinyLittles3D your welcome✨️

[@edwardrodriguez4974]

Incredible figure, could I know approximately how much resin you used?

[@DeeeFoo]

How long did this whole figure take you to print?

[@TinyLittles3D]

It’s been quite a while…it took me less than a week for sure

[@user-zg9xw6ib9i]

Hi~ Could I ask what's the stuff you use to shelter the face when you spray painting hair ? (some kind of clay ?) Btw awesome works of art !!

[@TinyLittles3D]

I used to use blue tack (poster putty) but now I changed to silly putty. It’s less sticky

[@XiiSum]

RELEASE THE 3D PROJECT PLEASE

[@TinyLittles3D]

Please message the sculptor here :instagram.com/kaidan3d?igshid=M2RkZGJiMzhjOQ== Tell him that I sent you 😉

[@kyleh9411]

how did you get that amazing skin color. Special combo from the fairy skin tones or just one over the primer? how did you thin it for airbrush

[@TinyLittles3D]

You are right, I do use the fairy flesh from vallejo. Majority of the time I start off with Base Flesh. Then depending on the skin colour of the character, I mix and match the different skin tones from the set to get the desired results. As for thinning, I like to use flow improver as a thinner. It works better for me.

[@kyleh9411]

@@TinyLittles3D awesome thanks

[@NezarVertee]

Which logiciel u use ?

[@N.soni2125]

Price?

[@sadokbenabdallah3547]

Would it be possible for you to send me the file for printing this model?

[@QuwrofWrlccywrlfh-lc1kv]

What do you use to polish after 3D printing?

[@N.Ailefpv]

hi, have the assembly plan? I printed it but I'm having a hard time putting it all together. THANKS

[@TinyLittles3D]

I also had a bit of a struggle putting it all together. I contacted the sculptor and he sent me a render of the pieces. It helped a bit. But I ended up not putting all the arms

[@N.Ailefpv]

@@TinyLittles3D ok, I stopped worrying last night, and I came to the same conclusion as you. In any case, you did an excellent job on this figurine. and thank you for answering me. 👌👍

[@bravejster1718]

If you could, could you give the file that you used for this. I also want to print one like this

[@TinyLittles3D]

Please support the artist. You could find a link to buy the file in the video description.

[@L31T40]

Do you sell or make to order? Where to buy your people?

[@KienzyMylien02]

Paint type for filamen?

[@user-bf3uz3cq4p]

glue link？

[@GreenbrookMedia]

how much does it cost you per model to print these yourself? Tempted to pick up a printer

[@TinyLittles3D]

It will really depend what kind of resin you buy. For myself, I buy resin in bulk and per model maybe it’ll cost me $25-$35per model? I never really calculated the cost

[@MericSelcuk]

STL ?

[@TinyLittles3D]

you can try and contact the sculptor here: instagram.com/kaidan3d/

[@user-eb8bz3hh7p]

What application did you use to make the STL ?

[@TinyLittles3D]

The stl was made by an other artist. I simply sliced it using lychee slicer to print it. If that’s what you were asking

[@PIPOXO]

[@OFFICIALSTREBERTYT]

tiny you from?

[@TinyLittles3D]

Canada....eh?

[@ronsone8373]

Where can i find this file?

[@TinyLittles3D]

contact the sculptor kaidan here: instagram.com/kaidan3d/

[@chrisdaustin]

What printer do you use?

[@TinyLittles3D]

I’ve been using the Saturn 2 from elegoo

[@everythings2922]

@@TinyLittles3D hi do you need big demension prenter to do that or a smoler one is okey

[@jenlisakimpark5959]

This is LIT🔥I was actually planning to buy resin 3D printer cause I don’t really like the ones they sell online. But honestly I don’t think I have the means to do all these steps😭 do you perhaps sell them or just doing it for your collections?! They’re amazing bruh🤍

[@TinyLittles3D]

Yes, Im working on creating a platform to sell some of my models. 3d printing and painting really isn’t as daunting as it looks. I just started earlier this year with no art experience at all. It’s a really fun hobby and very satisfying seeing your own work displayed at home