3D Printed Nintendo Switch Dock: BMO from Adventure Time

[@devinbrice991]

Its pretty great that the cartridge slot actually holds the switch cartridges

[@Shigeryu]

Cool! I'm the designer of BMO dock stand (selled by Made In urbana and other ^^') I really like your version, especially the addition of a compartment to store the cartridges, great job!

[@anshulkunta1645]

Came from reddit, keep up the good work man

[@CASSDesigns]

Thanks!

[@ashleypark4459]

YOU DID A GOOD JOB 😭 it’s better than I expected and I love the way you modified it

[@CASSDesigns]

Thank you! And thanks for the idea, it was a fun project

[@ashleypark4459]

@@CASSDesigns Anytime I’m glad you liked the idea 🥰

[@Kayrangus]

I don't have a switch yet but I would want this for when I do get one. And a 3d printer too lol... so I would want a notification when it's posted as well.

[@มีโอ-ซ5ล]

4:03

[@McGoobins]

This came out so clean. Good job man.

[@ohyeahinfinite]

Thank you so much! I really appreciate this! I’m excited. Gonna make this right on my birthday!

[@CASSDesigns]

No problem, thanks for watching and have fun making it!

[@lorderx]

Can i print it for oled version of switch?

[@fatimarazuri274]

this video deserves so much 💕 i love it

[@teafortk]

I love this, but I do have one question: is fondant another term in the 3d printing/crafts community? The only "fondant" I know is the edible kind for cake decorating!

[@CASSDesigns]

No it’s not you might’ve misheard me, are you talking about when I said bondo? Sometimes I talk a bit fast in my videos I’m working on slowing down!

[@snakethereaper6435]

I'm having trouble printing the face plate, I can't seem to get supports under the plate so it doesn't fall apart. Could you list the settings you use for that part? 😮

[@snakethereaper6435]

Nvm I found out that I didn't mess with the left side options on cura, they were grayed out for me until I clicked on the model then selected the 3rd option down (put supports everywhere, zigzag) which put supports under the model.

[@equiles]

What’s the cheapest printer I could buy to make this?

[@CASSDesigns]

An Ender 3 is what I use and it’s around $200 I think - any printer with a ~200 x 200 x 200 mm build volume should be good

[@circuitsable]

Nice! Wheres the HDMI out tho?

[@CASSDesigns]

I didn’t include one since I’d use this for when I want to use the switch screen, but if I bought a cable that was USB-C to USB-C and HDMI out, you could route the cables through the back of him

[@yurverycute]

Crazy, keep it up

[@paydenjackson7156]

That's crazy cool! Is there anywhere I can download and print this as well?

[@CASSDesigns]

thanks! I didn't post my files to thingiverse yet, since people sell them on Etsy - but I might end up posting them later this week. If I do, I'll link it in the video description and reply to this comment to let you know

[@paydenjackson7156]

@@CASSDesigns awesome man thanks 👌

[@Gman224]

@@CASSDesigns are you gonna sell it?

[@josequarvo2757]

@@CASSDesigns hey will my FLsun super racer be able to print this bmo

[@CASSDesigns]

@@josequarvo2757 yea printed on the same printer I mentioned in your other comment so anything I 3d printed on my channel you can too

[@maddenboi1414]

he comented the link to this video on his own reddit post and that's how I got to this video by clicking on the link

[@grouchy229]

Hey so when I downloaded the files, the legs are super super tiny, scaling issue?

[@CASSDesigns]

yeah i think i exported them from fusion 360 wrong, scale them up 2540% and you should be good. (25.4 mm in 1 inch)

[@grouchy229]

@@CASSDesigns thank you very much looks a little more reason able

[@CASSDesigns]

no problem! let me know if it doesn't end up fitting or you have any other issues - I can try to re-upload the files at the correct scale

[@grouchy229]

nvm fixed it, cura is stupid sometimes

[@CASSDesigns]

@@grouchy229 glad to hear! Yeah Cura is the best most of the time and the worst the rest of the time

[@ScyllasSimp]

How much material did it take to print all of this?

[@CASSDesigns]

I don’t 100% remember but definitely less than 1 KG of filament - depends on how much infill and support you use

[@ivyyang2139]

for some reason, the buttons came out to be enormous :( what would you recommend scaling down to?

[@CASSDesigns]

Your slicer must’ve scaled it to 10,000% automatically - it needs to be scaled to 2540%

[@ivyyang2139]

@@CASSDesigns that fixed the issue, thank you!!

[@CASSDesigns]

@@ivyyang2139 no problem, happy I could help!

[@dreamscapefx.studio4111]

what's the CAD program?

[@CASSDesigns]

Autodesk Fusion 360

[@bartkoevoet12]

Can you share the model? :)

[@CASSDesigns]

I'll post it on thingiverse this week and link it in the description - I'll also reply to your comment so you know when I post it

[@TheJakLP]

@@CASSDesigns When will it be? i want to print it :))

[@CASSDesigns]

Check the video description I just uploaded the models to thingiverse

[@CASSDesigns]

Check the video description I just uploaded the models to thingiverse

[@bartkoevoet12]

@@CASSDesigns What are the maximum dimensions of a part? Or what is the size of your 3D printer?

[@vitorpsdv9029]

Algum brasileiro?

[@jesssdfghj4092]

Dude thank you for uploading this, I wanted to make it for a friend and just recently got into adventure time, I’ll make sure to give you a follow here and on Instagram ❤