3D Printed Rockets...

[@nodnerbhu]

RIP Samm will be missed.

[@whynotbanana]

I just found this video. Came here to learn not to cry 😢 RIP Samm

[@sergejgajic]

since when

[@rytold8471]

I regret to inform you guys that Samm passed away this morning. He was in a motorcycle accident a few days ago and wasnt able to survive his injuries. Thank you all for supporting him through his youtube career!

[@MsRifle]

Dang man. I roomed with the guy a year ago back in Walla Walla. I wasn't all that close with him but I figured he'd be the next Elon Musk. I'm sorry to hear 😢

[@rytold8471]

For real, he was a huge inspiration. Thanks for your kind words.

[@carleewalker1942]

Zingier Barbecue thank you John.

[@kylernickel9381]

Wait is this legit? If so, thats a huge loss, watching his videos is inspiring and humanity lost a great mind.

[@rytold8471]

it is sadly very legit :(

[@commandingsteel]

this was the only video of samms' i ever watched and i finished it before reading the comments and finding out he had passed still leaves a small hole in my heart RIP

[@xXAddictedMiner64Xx]

I did the same thing 3 months ago for extra credit in my physics class, but didn't get to launch because I didn't want to burn down the other half of california

[@SammSheperd]

Yea careful with California. It’s very flammable

[@darklighting637]

Samm Sheperd Excuse me do you have any engineer kits that i can buy that has electronical components and frames???

[@behindthen0thing]

@@SammSheperd how are you Sam

[@nicholasbrooks7349]

@samm he is dead

[@roidroid]

I've been subbed to you for almost 3 years, your videos were always amongst my absolute favorites and i looked forward to seeing the interesting stuff you were doing. Was curious why we hadn't heard from you and looked up your channel this morning, have been crying the whole day since hearing the news. I'm sorry to see you go man. Hate goodbyes.

[@fabiovezzari2895]

He is still somewhere flying his centrifugal fan plane on a sunny beach, he s not dead, he can't be dead

[@raa6504]

Now I'm sad.. rest in peace sir.

[@denniss.258]

Like for many others, this is the first video by Samm I've ever watched. It shocked me to read in the comments that he passed away. I didn't know him but I'm sure that he was an amazing person. Inspiring others is the most noble thing you can do in your life. Thanks Samm. Rest in peace.

[@amessman]

Flying organ transplants in jets? Wow... Impressive!

[@Jameroqui]

Sam I have only recently found out you have passed away but late or not you are a legend I hope your flying RC in the sky 👍

[@arnoldtm31]

RIP Samm.. you will be missed dearly.

[@jmannUSMC]

You taught me about vortex generators. For that I am eternally grateful. Rest easy man.

[@Backlight4405]

R.I.P

[@airplanenut6242]

Welcome to Portland! And also you’ve just added one more item to the list of reasons why I want a 3d printer. 😃

[@kylernickel9381]

Ha! I’m my engineering class I did this as my little side project, made my first one this February just before the release of this and made my mk.2 earlier this week! Nice job, my fellow aeronautically inclined fellow

[@Polymath2B]

2:26 lol, just connects the wires to a lipo for ignition XD

[@binhho2532]

Sam, I know that you won’t see this anymore but you remind me of Trevor flying arms shipments in GTA. RIP Sam.

[@olibarahosasa1137]

😂

[@dinosoarskill17]

he had such a nice beamer! ):

[@scapy1993]

RIP

[@Del350K4]

It´s always nice to see some unexpected Beaver footage - and I greatly enjoyed the rest of the video as well.

[@cactusfishy1596]

It's really sad and almost scary seeing all the replies he made to comments. RIP, we will miss you

[@PfunkNH]

Miss your videos man. Just got around to 3d printing rockets and i just wish i could share it with you

[@Julian-wd8ym]

3:19 have you been to munich?

[@MCsCreations]

Really nice work, man. And have great flights over there. 😊

[@Chazz155511]

Do I sure miss Samm... hope his family is doing well.

[@shri3141]

Rip

[@monapinkmusicold9902]

How did you get a German licensed car to portland? at 3:19

[@ForrestSheperd]

“Woah” 0:48 -Forrest Sheperd 2K17/2K18

[@janettesheperd2786]

Forrest Sheperd your cameo appearance in this vid was great! Tell Samm to put you in more shots!

[@call911forcookies2]

yo, those are some sick lenticular clouds, or whatever they're called, at the end :D

[@milesmamigonian739]

We miss you.

[@salehjamaleddine7468]

RIP Sam

[@amogh2864]

Congrats! Captain Joe mentioned you in his latest video!

[@SammSheperd]

Yea!!

[@luigarcia3266]

I followed your video on the DIY drone built. Dude there is so much settings and time to spend on it. Took me 2 weekends to get it working and it is still not 100% done. I didnt even eat on some days just trying to figure everything out. Ps i am student pilot. Hope to see you around at random FBOs.

[@mon0522]

You should put those rockets on an rc plane. And there you have an air to surface rocket!

[@SammSheperd]

I love done that before in an earlier video

[@dimitrijenovakovic7942]

Rip.

[@WissenschaftTech]

RIP SAM

[@nocturas]

Also, glad you're back to making some videos :D

[@cameronmoore1491]

No more washingtonian... now an origonian. Lol love those shots from the plane.

[@Jenerik_Guy]

Good to see you're not posting at 2 in the morning this time :D

[@SammSheperd]

Hahah I almost did last night but stopped myself to actually fix some things and wait to re-upload and all. I’m usually too impatient

[@Lucas_sGarage]

Nooooooo whyyyy

[@benchern3048]

Haha awesome! We got to 3D print a rocket like that at a camp this past summer. Anyways, I got the Geeetech i3 wooden version and for some reason the extruder gear keeps skipping. I checked the set screws, motor voltage, adjusted slicer settings etc. I know you bought this printer and it seems like its working find for your, did you have to change anything in order to make it work?

[@SammSheperd]

It’s the nozzle clogging up. Make it hotter and print slower. Maybe try clearing the blockage. Clogged extenders are a real pain

[@GOAFPilotChannel]

My printrbot sometimes does that too

[@not_a_therapist]

I’m 3D printing a race drone out of CF plastic. What’s the cheapest *True* VR/FPV kit on the market?

[@nayanasdb]

what is the 3d modeling software and 3d printing software that you have used ??

[@SammSheperd]

Modeling is Rhino, but if recommend Fusion 360. Printing software is Cura

[@RaphaelAguirre]

rhinoceros and cura, in that order.

[@Abdulrahman-lt9iu]

what program is he using on mac?

[@Extreme__Sitting]

WHAT when and how did you get a type rating?

[@markcrane6959]

Try the shell command in rhino if it's in your version as an alternative to offset surface , works bit better for hollowing out complex stuff.

[@SammSheperd]

Yea I bet capping the bottom and then shelling it would work better. Or maybe just make it a solid and let the 3D printer hollow it out with a tiny bit of infill. Really should just learn fusion 360 better

[@Mark04]

Software name

[@AKATEATime]

Boeing Field at 3:44! Not sure what the one before that was...

[@SammSheperd]

It was also KBFI but from the south. But the camera was looking at KSEA

[@AKATEATime]

Ah, of course, you were over Tukwila. I grew up in Washington. :)

[@robmckennie4203]

I heard in one of your old videos that you did a DIY autopilot with an arduino, is there a video about that? or maybe a blog post?

[@SammSheperd]

I wasn’t really waking videos back then so I don’t have much documentation. I was just playing around. It was an APM 2.6 and I used APM Plane firmware to configure it

[@gygaxthegoat2491]

Well done mate!!

[@liphysuprr4235]

Do you think you could make a drone 3d printed

[@SammSheperd]

I have a video where that is the case. One of my first drone vids

[@rudolfsarromaa6597]

try to make an rc plane that you can mid air refuel (change batteries) with another plane in the air

[@tmerkury2813]

Hey quick question. How can i find the center of lift on a plane?

[@nicewhenearnedrudemostlyel489]

Start by focusing on the real world, over video games. then, by learning anything at all about the topic, you'll know how to do that.

[@blopadyblop28]

when will you post again?

[@carleewalker1942]

blopady blop he passed away 8/7/18 in a motorcycle accident

[@fabiovezzari2895]

Can't believe it

[@bobmiah]

Carlee Walker he asked that before he died

[@bluegill5192]

Now you live my state, wish you could give me some pilot lessons lol.

[@user-qx7tm5df8j]

nice e92! you still have the munich plate on??? :D

[@SammSheperd]

I just really haven’t cared to take it off

[@user-qx7tm5df8j]

if its legal why not? looks good ^^

[@jacobbrinkman4452]

Nice video man.

[@sashali6666]

Do you use soild works?

[@ValFPV]

he is dead

[@Alislaboratory]

Hey dude! Just wanted to let you know that your 60 subs away from 100K! Great video.

[@TheOnlyDamien]

Holy shit a Samm video! I am always happy to see a notification! Edit: Flying around organ transplants? That's really cool! also I love the use of the cardboard tube from a paper towel roll.

[@yxhankun]

Missing u

[@koi-irako]

nice one, maybe you should add parachute thing

[@tonofcol7103]

What is the best LiPo charger?

[@GOAFPilotChannel]

imax b6ac

[@tonofcol7103]

Thanks

[@ramenpowder1884]

never clicked on a video so fast

[@MrWebby63]

Which CAD program are you using?

[@SammSheperd]

That is Rhino, but I’d recommend Fusion360

[@KnowledgePerformance7]

What ratings do you have? Also do you have a commercial license?

[@SammSheperd]

I am a Certified Flight instructor (CFI) And also a commercial pilot for both single and multi-engine airplanes

[@KnowledgePerformance7]

Samm Sheperd Cool!

[@ClarkSchaefer]

Neat stuff!

[@samiant5199]

Always really nice to hear from you. I really admire your job. For the tube rocket all you need to do is reprint the nose cone and add a rubber band between the nose and tube. midway add a shoot or ribbon. boom... multi use. Add wadding as well but I'm guessing you new all of this. Either way great to see a nice update video 👌

[@SammSheperd]

It doesn’t go that high and I’ve had no problem finding and re-using the cone. Great tip from normal rocketry though.

[@mylesspear]

3:29 Cessna citation?

[@SammSheperd]

CJ3 yes

[@Tart0p0mme78]

Why is you car registred in Germany ?

[@awjnck204]

you could of made a second stage with the separated ends, and a parachute... but that's a bit tricky lol

[@savage101.]

You're giving advice to someone who passed away in 2018

[@tibetan3471]

lol im making a 3d printed rocket with 2.5 pounds of solid fuel.

[@minimalist.6051]

Yaaaasss a new video :D

[@amessman]

3D print a turbo pump?

[@ZainAhmed]

Nice m3!

[@alexmac7103]

3d modeling with a track pad makes my heart hurt but the rest of this video is good.

[@congratsondivorce]

YAY you're alive

[@bobmiah]

Johnny Kane not anymore

[@cosmicsurfer5911]

Would be great if you fix a Samsung 360 gear cam to your plane. That would be awesome in VR.

[@patjohn775]

You know you can just print thread on the 2 pieces so the screw together

[@pipess7064]

Unfortunately your comment falls on absent ears - he died over 2 years ago.

[@STruple12]

Yes, new video!

[@SammSheperd]

At least it’s something I guess

[@STruple12]

It is. But even if it wouldn't then your calming voice would still be enough (#nohomo, just exam period)

[@markcrane6959]

You always do great interesting and smart videos nice job , good seeing someone use rhino , it's awesome and so powerful and easy to learn. Nice job mate.

[@SammSheperd]

But at the same time such a pain in the ass if you don’t do things right.

[@thenoobletlego]

$45 for two relatively small 3D printed parts? Eh.. come on lol Anyone can go to the store and get a legit Estes kit for the same price.

[@SammSheperd]

Yea from my perspective I guess I don’t actually want to sell them but wanted to experiment with it. I’ll lower the price cause that is rediculous

[@Ban_Dee]

It’s illegal to be on your phone when you’re in a car, is it illegal on a plane? Him: watch me

[@Mowogjones]

Nice car!

[@moonchildyt7456]

Can you 3D print wheels

[@SammSheperd]

Sure but why

[@behindthen0thing]

How are you doing Sam?

[@grumpyaustralian6631]

.....dude, he died.

[@behindthen0thing]

@@grumpyaustralian6631 say what?

[@grumpyaustralian6631]

Look at his newest upload

[@behindthen0thing]

@@grumpyaustralian6631 pretty sure it's a prank.

[@grumpyaustralian6631]

I wish, bloke had some great ideas floating around in his head and saved more people than we'll ever know thanks to flying organ donations. I'm just glad he was doing something he loved when he passed, riding his motorbike.

[@zombaldag9337]

0:59 Yesterday i asked you to fill in the ________

[@wyattb3138]

YIAY GUY

[@charlescunningham1872]

KZbin sleeps on this dude

[@SammSheperd]

I don’t get it

[@ForrestSheperd]

I do

[@charlescunningham1872]

I'm saying you should have more subscribers for the content you put out

[@janettesheperd2786]

Forrest Sheperd you get everything. Explain

[@janettesheperd2786]

Murey Tasroc ha! I Should have scrolled down-thanks!

[@nerys71]

$20 not bad. $42. no joy. Fix the shipping and I will buy and fly one. but I am not paying over $21 to ship it :-) also put a parachute in it. :-)

[@SammSheperd]

I have no idea how much eBay is charging to ship. I’ll see if I can fix it here soon

[@sickyofearth7564]

hello! this is totally irrelevant to this video and more of a general question to you. lets say i want to design an airplane. id like to have as much creative freedom as possible in the design. with that in mind are some wing designs/air plane designs just impossible? if so how can i avoid these detrimental points. sorry for the vague question to its kinda broad and might be hard to answer.

[@fabiovezzari2895]

I would love so much to see him answering your comment... Unfortunately he won't reply to his viewers anymore... He died, check his last video....so bad

[@sickyofearth7564]

oh.......... :/

[@yxhankun]

So much knowledge l that l need to learn from you.

[@aglyptodon9971]

Shoutout KBFI, do my flight training there!

[@SammSheperd]

Nice! Busy place to learn but it makes you better!

[@zeldalina1762]

Nice e92.

[@SammSheperd]

Thank you

[@StephenTack]

Welcome to PDX, neighbor!

[@SammSheperd]

Hey thanks!

[@InvertFPV]

Your back !!!!!!

[@johnpeterson8253]

I live in Portland!

[@SammSheperd]

Well hello then

[@isaaclyonsf1]

Awesome!

[@3zk1i_93]

F

[@MarinusMakesStuff]

Haha, it's funny how you talk about the operations within Rhino. I mean, I know Rhino by heart so I know what you're talking about, but for most viewers I think they are just some random terms :) Would be interesting for them if you would explain which program you're using first before talking about those terms. Nice try on the rocket, sadly in my country there is only a little open space to launch a rocket and you have to be a member of a club which is expensive. Totally blows!

[@SammSheperd]

Really didn’t think about it all that hard. Not a tutorial but maybe a glimpse into the process would be interesting or inspiring

[@dongsukim9932]

3D 프린터로 어떻게 로켓을 제조할수있다고 들었습니다. 누군가 힘을 모아 3D프린터로 로켓을 제조 하면 가능하지 않을까요?

[@nocturas]

Was that your car?

[@SammSheperd]

Yes. See insta for more pics

[@nocturas]

Sweet. Well done, hombre. Looks like things are going well.