I bet if you flooded the paper mold with water thin CA glue you’d get something really strong durable and dimensionally stable. Worth a shot IMO for the obvious reasons
@TeranAtelier2 жыл бұрын
Yes that would certainly make the paper mold stronger.
@Psychodrummer91 Жыл бұрын
&fujw swU
@pequodexpress2 жыл бұрын
That was quick!
@TeranAtelier2 жыл бұрын
Yes, thankfully I managed to the printer running well very quickly
@smcvsm2 жыл бұрын
Excellent video.
@TeranAtelier2 жыл бұрын
Thank you very much!
@Brioh4z4rd2 жыл бұрын
Great video. I’m new to leather craft and starting to work with molding. Out of curiosity, is the paper mold a heavy card stock? Did you do anything special to prep it? Thanks
@TeranAtelier2 жыл бұрын
Thanks! It is two layers of card stock that I have stuck together to strengthen it, the firmer it is the better but you still need to be able to cut it accurately. As long as you remove all the dripping/excess water from the leather so that the water will not weaken the paper mold too much there will be no special preparation required.
@Brioh4z4rd2 жыл бұрын
@@TeranAtelier Thank you! That helps a great deal.
@voidborn-one2 жыл бұрын
Although I understand it's somewhat a hustle (what isn't?) You could combine two molds (paper and plastic) to eliminate 3d print impression or use DLP resin printer..
@TeranAtelier2 жыл бұрын
Yes resin printing would be a step up in smoothness but would be limit the size of the molds. I do not think paper would work well for complex molds but I am looking into solvents, resin and fillers.
@jakek5842652 жыл бұрын
You could use a higher resolution. Also ABS filament and acetone for smoothing it out.
@TeranAtelier2 жыл бұрын
Yes improving the resolution would be the easiest way. There are some chemicals that will similarly dissolve and smooth out PLA but I haven't tried them yet.
@jakek5842652 жыл бұрын
@@TeranAtelier I'll have to look into the PLA chemicals. My printer is supposed to be able to do ABS. But it's a cheap model and I have never brought it up to that temperature.
@TeranAtelier2 жыл бұрын
@@jakek584265 ABS requires good ventilation which is why I am hesitant to try. Ethyl acetate is the solvent for PLA but I haven't tried it yet.
@zweieck10752 жыл бұрын
Is it possible to buy something made by you. Do you have a shop? If so, could you provide me with a link. Thank you.
@TeranAtelier2 жыл бұрын
I sometimes accept commissions through my Instagram, you can contact me there but I won't be accepting any new commissions until March.