3D Printing Super Mario with Bambu lab A1

3D Printing Super Mario with bambu lab A1
Filament used below:
White PLA: amzn.to/3Lg297C
Red PLA: amzn.to/4btQcpS
Dark Brown (Hair): amzn.to/3SicrZd
Light Brown (Skin): amzn.to/3xJSWBt
Blue PLA (Outfit): amzn.to/3xMnUcd
STL credits:
Remixed by ThePerson22
makerworld.com...
Remixed by Zep_To_3D_Druck
www.thingivers...
Original work by Anthonylu
www.thingivers...
Tools i used to make my videos
Samsung Galaxy S23 Ultra: amzn.to/3YsuCMJ
Blue Sona Dynamic Mic: amzn.to/3Z2Rraq
Elgato Stream Deck + : amzn.to/3Y8wH0E
GoPro Hero 11: amzn.to/3VPTo7N
Samsung Galaxy S22 Ultra: amzn.to/35eXph0
Samsung Galaxy S21 Ultra: amzn.to/3nLoRbZ
Sony A7iii Camera: amzn.to/3nsrtLE
GoPro Hero 10 Black: amzn.to/3merxz9
GoPro Hero 9 Black: amzn.to/3ChtNer
Rode NT-USB Mini Condenser Mic: amzn.to/3CjkQS6
InnoGear Microphone Arm Stand: amzn.to/3vKP2CT
Samson Q2U Dynamic MIc: amzn.to/3jz6B4g
Phone S20 Ultra: amzn.to/3BhdtsW
Drone DJI Air 2S: amzn.to/3Bf1CeM
Drone Mavic Air: amzn.to/2Zr2Eaj
JIGA Portable Powerbank: amzn.to/3nqXIut
SSK 1 TB Personal Cloud: amzn.to/3jEgbTs
Coman Monopod: amzn.to/3vNa43Y
Samsung CRG9 49in monitor: amzn.to/2ZpbnKO
Corsair K95 RGB Platinum Keyboard: amzn.to/3Eds6za
Corsair VOID RGB Elite Wireless Headset: amzn.to/3BlHvf4
Ender 3 V2 3d Printer: amzn.to/2ZuDqIF
Vecelo Foldable desk: amzn.to/3ba0yyt
My Main PC
CPU-AMD 3700x: amzn.to/3maKra6
MSI Graphics Card 3080 RTX: amzn.to/39AFgwO
Graphics Card-MSI 2060 RTX: amzn.to/3Chbwhu
Motherboard Auros X570 Elite: amzn.to/3CfmBQd
RAM - G.Skill TridentZ RGB Series 32GB: amzn.to/3vSpdkE
Storage - 970 EVO Plus SSD 250GB - amzn.to/2Zmp0d2
Elgato Capture Card 4k60 pro mk.2: amzn.to/3138eAI
PSU EVGA 750W: amzn.to/3GmrgSN
Music Tools:
Positive Grid Spark Amp: amzn.to/3Eb78Ru
Ibanez Guitar: amzn.to/3pCFB7x
Samsung Active 2 Smart Watch: amzn.to/3bbt9mT
Get 40% off the Creative Cloud All Apps Plan:
clk.tradedoubl...
Saltwater Tank
Fluval Evo Tank 13.5 galloon:
amzn.to/3GxJXmL
Ai Prime 16 HD reef Light
amzn.to/3mcuX5f
Carib Sea Arag-Alive Substrate:
amzn.to/3EwhZGb
Aqueon Heater 100W
amzn.to/3Gmb1Fq
Fritzyme turbo start 900
amzn.to/3pEPxgW
Waterbox 50.3 gal tank:
Jebao Doser 3.4
amzn.to/3yahaBQ
MagTool ATO System:
amzn.to/3y9bTuj
Fritzyme Turbo start 900
amzn.to/2ZWSYF3
Special Grade Sand Carib Sea
amzn.to/3ENT9l3
M-50 Protein Skimmer:
amzn.to/3FWbahD
Aqua Intelligence Aqi Kit Mount Hydra26/52
amzn.to/3k6KHp4
Instant Ocean Sea Salt 15 lbs 1 Pack
amzn.to/3EMn0dz
FREESEA Wavemaker 1050 GPH
amzn.to/300zRtZ
Aqueon Preset Heater, 200W
amzn.to/3mIVk3c
Syncra Silent 2.0 Return Pump
amzn.to/3GSusG1
Power Strip Surge Protector
amzn.to/3qcVIJk
VIVOSUN 800GPH Submersible Pump for waterchange
amzn.to/3pG0gYk
Some of these links are affiliate links, which means I might receive a percentage of the sale without additional cost from you.
Join this channel to get access to perks:
/ @jobilletuts
#bambulab #3dprinting #supermario

[@emi124468]

Hi, all part you print using default settings from bambu? 0.2 layer/infill? 😀

[@JobilleTuts]

I didn't modify any settings from the designers A1s print profile 0.28mm layer, 2 walls, 15% infill makerworld.com/models/120467

[@JobilleTuts]

Printed with bambuhandy app

[@emi124468]

Ok t. Q for info ☺️👌, so the small part u put brim for better adhesion..

[@JobilleTuts]

​@emi124468 it is better to add it. But i think if you use the profile i used in this video from makerworld, he didnt add it for the yellow buttons. But it is better to add it

[@emi124468]

Ok t. Q for info 😉👌

[@Budmiester]

How is your adherence so good???? Tell me how you prep your plate. Because if I printed this on my A1 the smaller parts would have just fallen off.

[@JobilleTuts]

Thanks for watching @Budmiester. I don't really do any special steps for adhesion. I just clean the plates with isopropyl alcohol for every print i make. Also for every print in A1, i turned on the leveling and calibration always. I turned off the timelapse cuz its making some weird results and doesn't produce a clean print. Im only using the stock PEI plate that came with the A1 printer. Its also good to dry your filament to make sure the moist won't affect your prints. For smaller parts, i usually add some brim to the slicer settings just to help out with adhesion. I hope this helps. Thanks again for dropping by

[@alexbrazstudio]

Please, where buy the archive stl?

[@JobilleTuts]

STL credits: Remixed by ThePerson22 makerworld.com/en/models/1204... Remixed by Zep_To_3D_Druck www.thingiverse.com/thing:340... Original work by Anthonylu www.thingiverse.com/thing:199...

[@oOoKaPuTTsCHiNoOo]

Hey hey 👋🏻 This looks really nice! Did you model it? Any chance to get the files? 😁 You should do more nintendo related models to grow your channel 😁

[@JobilleTuts]

Thank you! The model stl link is in description with credit to the creators. I added all the link. Yes im actually working on more characters to be printed. Next will be Yoshi the green dinausaur from mario bros =)

[@oOoKaPuTTsCHiNoOo]

@@JobilleTuts uhh hyped 😁 I'm looking forward to it.