How To Make Rc Aeroplane | DIY Graupner Taxi Build & Fly |

making electric version of Graupner Taxi Rc plane
hello guys !!!
in this video I'm going to make rc Graupner Taxi plane, this plane is engine driven plane but I made it electric version. & it fly so nice very stable.
specially for beginner or intermediate pilots who really want to learn rc plane flying as well as landing..
if you are interested in RC Plane flying then go for it, it is best model for learning landing & take off.
Plan Link in A4 Tiles :rb.gy/45yflp
Plan Link website :outerzone.co.u...
all the plane dimensions are according to A4 tiles Plan main wingspan dimension also.
Electronics That is used :
1) EMAX 35A ESC :rb.gy/mh79j3
2) EMAX Servo Motor : rb.gy/wcouct
3) UBEC 5V 3A
4) DYS 1450kv with 6045 prop
5) 11.1v 1500mAh Lipo Battery ( 3s Lipo battery recommended )
6) FlySky FSi6 Tx & FS 2A 4Ch Rx
if you still face any issue them you can dm on my Instagram or comment below.
Instagram: ...
Music : KZbin Library

[@coriscotupi]

This was my first RC model, I built it in 1976 (in balsa, of course) from a Graupner kit. Nice job. Just an observation: the dihedral shown in the plan is for rudder-only (no ailerons). If using ailerons for roll control, the dihedral could be substantially reduced.

[@mibengal]

I built this using this tutorial and just maidened it. Flew great. I'm going to step up the prop size and inch in diameter from his recommendation. My first plane.

[@RochaMolinar]

Try making warbirds or a dhc2 beaver, it would be awesome

[@tonwort]

i made a DIY Taxi, with the same plan, but I used balsawaood. I am enjoying your build a lot. It gives me memories..

[@rudolfkrebs2311]

Ich kenne den "Taxi" auch noch aus meinen Kindheitstagen! Jetzt bin 60, aber der Taxi ist offenbar immer noch ein geiles Teil, um die "Grundprinzipien" des Flugzeugbaues kennenzulernen! Außerdem super Video! 👍😎🇦🇹

[@MrSundor-o3t]

Very nice 😊😊😊I will try to make this airplane ✈️✈️ love from 🇧🇩🇧🇩🇧🇩

[@3JWings]

Thank you so much 😀

[@Rudy32225]

8:17 Spar fabrication is genius! congratulations and thanks for sharing.

[@3JWings]

Thank you very much!

[@Origami-786]

Make Aroplane out of Ice-cream Sticks

[@thetwogardens6048]

I would Love to make this but its hard to get Depron in Australia !

[@charlesbola1971]

Congrats,great job in this taxi👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@davidwilliams7842]

Great ! I remember from my youth and now retired and returning to the hobby am enthusiastic to try to build your foam versiion. Can is ask if you covered the foam or paired the Orange straight on ?

[@3JWings]

Cover with colour packaging tape

[@davidwilliams7842]

Ok thanks Hope my Model turns out as good as yours !

[@robsonferreiraalves]

Congratulations, beautiful model airplane. It even made me want to fly.👍

[@EJ-74]

Cool build, I just built one similar to this one, I have a couple videos of it, Thanks for the tips, ✌🏻

[@Nimbusnimbusnimbus]

Me gustan tus construcciones soy de la idea de que entre mas rápida y sencilla la construcción es más divertido 🎉

[@chrysostomgunaseelan3907]

how do you color the plane, . do you use decals? draw lines? how do you dress it up?

[@Learjetsaviation]

I love your quality builds!!!

[@NIRAJPATELV]

Absolutely perfect job Cheers 👌👌👍👍👏👏

[@sandipansaha2004]

material used in plane body...thermocol or depron

[@ishwarsinghjangir3091]

👌👍👍very nice 🙏🙏jai shri Ram

[@rudraa7145]

Too good , that the plane is looking real .

[@yuvrajarora9359]

Which material you are using for wings

[@chuckmaddison2924]

Very nice, better than my 2 channel botch. If you don't mind, how much thrust do you have ? My plane is 185 grams with 2 motors providing 100 grams of thrust. Still yet to fly out side .so far only across lounge room.

[@ozguryucel854]

great job... ıt was nice to watch your video... and thanks for the plans... 🙂

[@kabra9908]

Can i use 2212 2200kv and 6035 propeller?

[@THESHORTSWALA-xz6nr]

Sir can I use 1400kv basic bldc motor and 30A basic simonk esc with normal 9mg servo

[@buildingcodepro9237]

Very cool! The home made drill is awesome too!

[@Chandrabotics]

What is the name of the material used to build the body of the aeroplane?

[@AvdhootLokhande-eo2og]

Can you make a powerful dron which can take 5kg wait easily and has long range to fly OR a smallest flying rc dron like a house fly

[@spectrestudio1122]

Thee are built beautifully! Do you ever sell RTF planes? I love your craftsman ship and would love to own one if you ever plan to sell a trainer airplane!

[@himelkhan5751]

Nice work 👌

[@3JWings]

Thanks ✌️

[@ilan8465]

Absolutely amazing perfect work.

[@nanchangCJ-A]

KT板确实很轻，但是比较软。没有木机那么好的刚性

[@adamgre6819]

That is an incredibly well put together and beautiful flying plane mate. Love how you made it out of materials that pretty much anyone could get hold of. Liked and subscribed - love your work mate, please keep it up - you have fans!

[@3JWings]

Thank you! Cheers!

[@HungLong-x3p]

electronics i can use motor 2212 1400kv with 8x6 prop, 3 servo 9g and 850mah 3s battery

[@654comet]

what is the purpose of using UBEC in this ?

[@creativec.g]

Nice plane❤❤

[@akshujangir4806]

Nice 👍

[@vinothn4228]

Suggest me some best material for this ... Like body material

[@ARSURAJ7875]

Bro what a jok made a rc plan me from london 🇬🇧

[@abhigyayadav3544]

Can you plz do rafale or Tejas fighter of india

[@floxxio]

Can you post a video on how to make them homemade foam wheels?

[@theheroic5940]

Hey, he doesn't respond in his old videos. So you could try looking over other tutorials

[@KMG442]

Very nice 😮

[@gundeep33]

Nice job 👏

[@TheXJ12]

Great ! What is the "empty" weight of your Taxi ?

[@akhileshverma7049]

Great work my brother

[@aircolumbia4571]

Vuela muy hermoso

[@RoshaniJi-n6i]

Good work 3J ❤ keep it up we will always be there for your support.

[@3JWings]

Thank you so much

[@mayurpatil4632]

Nice bhai 🎉

[@BroTechMalayalam]

Can i use thermocol

[@Subtractive-et2nm]

Nice landing

[@kushanvimanka8323]

Can this plane built as 3 channel? Rudder, Elevator and throttle, could it can be handle with smoothly?

[@CreativeShehroz86r]

Sir my rudder servo of f949 reciver not working properly please make a solution video

[@Transit67F2]

I like your drill :)

[@3JWings]

Thanks you😊

[@chrisgaalen]

Nice work, like it.

[@andiwangen9696]

👍👍👍❤️

[@RobertPach-y5m]

Du kannst es Bravo

[@dogshortvideo3612]

Which size of plan zerox is print

[@3JWings]

A4

[@theragavelan]

Can you make a video on how you made those wheels for landing gear?

[@Origami-786]

Beautiful airplane ❤

[@Mkel.]

con cuanto peso quedo?

[@stephenfloat1260]

Hi were do you get the plans from please

[@creativec.g]

What is the total weight of this plane

[@theheroic5940]

Can i use 2200mah 3s 80C lipo battery with simonk 30A ESC

[@teachwithsmile68]

Great job bro ❤

[@juanmolina7959]

Hola. Pone el plano con sus medidas. Gracias

[@pavanmachhi1927]

Good 👍👍👍

[@wycliffejuma5441]

Nice build. A link to buy depron kindly?

[@Shockingbeats]

Damm Men You Make This Hilarious 😮😮

[@rachans9401]

Nice 👍👍

[@justsaying5477]

Where to buy the foam sheet

[@mcbmcb8863]

Sayfanın boyutu nedir?

[@AndreSilva-jq9kq]

nice

[@theheroic5940]

why did you put different airfoils in different wings

[@skullCrusher2503]

Can I use 40 a or 30a ❤ESC on it. Please answer me. Thanks (Advance)

[@3JWings]

yes you can use it

[@skullCrusher2503]

I am very grateful to you 💗. 👍 again for your precious time. May you always succeed.

[@technoexperiment1234]

Bhai me aap ke samne 🙏 hu plane udana sighao please 3j wings Bhai

[@d.o.nmuzic3802]

Where do you get these plans?

[@lalonexus30]

👉💯👍

[@AungGyi-o4z]

Motor မိုက်တယ်

[@deyyv.v]

What propeller did you used?

[@deyyv.v]

@3JWings

[@drawingmaster4027]

Nice

[@Headshot-ch]

Bro how big is the exact size of pdf if i wana print it in a big paper sorry about my bad English thank you so much

[@ashwinrawat9622]

what is that material?

[@becool2708]

wing length???? ]

[@sainirchobby]

Good job brother, where you from?

[@3JWings]

INDIA

[@sainirchobby]

@@3JWings I know brother, I mean which state, i m also a Hobbist your project are too good👍. Want to meet you.

[@technoexperiment1234]

Bhai Depron online bahut costly he ofline market me kaha milegi | My KZbin channel ON Eid

[@learningseearning2375]

How you make thermocol cutter

[@BRAWLSTARS-ht4yp]

wingspan and weight?

[@povagamer1363]

Sir apane vi 5v 3A ubsce ku use kiya

[@3JWings]

Maine Jo wax use Kiya hain use me 5v output nahi hain so external 5v bec use kiya hain

[@RajeshKumar-vv7sx]

3j wings Bhai Techno Experiment Extra channel

[@olegbadmaev7291]

Сколько весит самолёт?

[@atheermuhammed2971]

Can I use a straight wing rather than a slanted wing?

[@3JWings]

Yes you can

[@atheermuhammed2971]

@@3JWings Why did you make the wing diagonally?

[@theheroic5940]

@@atheermuhammed2971 it helps in stability

[@Keisari_03]

Can you weight it please

[@mr.bean_gaming6754]

Size of paper

[@xmozdemir]

Broo nice projects, congratulations.

[@3JWings]

Thank you! Cheers!

[@iam-y9d]

Make big rc ornithopter not small next time

[@vuthiminhphuoc7905]

Replace by motor 2212 1400kv 8x6 2 blade propeller, 3s 1300mah battery😢

[@theheroic5940]

Um i am not sure it will work but i used 1000kv 2212 1045 2 blade 2200mah

[@Origami-786]

Rubber Band Powered Airplane

[@-normal_guy.]

Total cost?

[@EJ-74]

Around 100 bucks for the electronics not including the radio and receiver, That depends on how much you are willing to spend lol Cheapest I'd say 100- 150, They get very expensive, the materials are very cheap. Couple bucks for some foam board and some hot glue.

[@mhmodatl]

sir how to find the map for making

[@ParthPokale-oo4ni]

It is in the discription

[@devenvm1971]

Will you send me one kit